On Thu, 14 May 2020 11:39:19 +0300
Sergiu Cuciurean <[email protected]> wrote:

> As part of the general cleanup of indio_dev->mlock, this change replaces
> it with a local lock on the device's state structure.
> This also changes some internal functions to pass the pointer to the
> state-struct vs a ref to indio_dev just to access the state-struct again.
> 
> Signed-off-by: Sergiu Cuciurean <[email protected]>
Applied.  Thanks,

Jonathan

> ---
>  drivers/iio/dac/ad5360.c | 17 +++++++++++------
>  1 file changed, 11 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iio/dac/ad5360.c b/drivers/iio/dac/ad5360.c
> index 2ac428b957e3..3e0c9e84e8da 100644
> --- a/drivers/iio/dac/ad5360.c
> +++ b/drivers/iio/dac/ad5360.c
> @@ -67,6 +67,7 @@ struct ad5360_chip_info {
>   * @chip_info:               chip model specific constants, available modes 
> etc
>   * @vref_reg:                vref supply regulators
>   * @ctrl:            control register cache
> + * @lock             lock to protect the data buffer during SPI ops
>   * @data:            spi transfer buffers
>   */
>  
> @@ -75,6 +76,7 @@ struct ad5360_state {
>       const struct ad5360_chip_info   *chip_info;
>       struct regulator_bulk_data      vref_reg[3];
>       unsigned int                    ctrl;
> +     struct mutex                    lock;
>  
>       /*
>        * DMA (thus cache coherency maintenance) requires the
> @@ -205,10 +207,11 @@ static int ad5360_write(struct iio_dev *indio_dev, 
> unsigned int cmd,
>       unsigned int addr, unsigned int val, unsigned int shift)
>  {
>       int ret;
> +     struct ad5360_state *st = iio_priv(indio_dev);
>  
> -     mutex_lock(&indio_dev->mlock);
> +     mutex_lock(&st->lock);
>       ret = ad5360_write_unlocked(indio_dev, cmd, addr, val, shift);
> -     mutex_unlock(&indio_dev->mlock);
> +     mutex_unlock(&st->lock);
>  
>       return ret;
>  }
> @@ -229,7 +232,7 @@ static int ad5360_read(struct iio_dev *indio_dev, 
> unsigned int type,
>               },
>       };
>  
> -     mutex_lock(&indio_dev->mlock);
> +     mutex_lock(&st->lock);
>  
>       st->data[0].d32 = cpu_to_be32(AD5360_CMD(AD5360_CMD_SPECIAL_FUNCTION) |
>               AD5360_ADDR(AD5360_REG_SF_READBACK) |
> @@ -240,7 +243,7 @@ static int ad5360_read(struct iio_dev *indio_dev, 
> unsigned int type,
>       if (ret >= 0)
>               ret = be32_to_cpu(st->data[1].d32) & 0xffff;
>  
> -     mutex_unlock(&indio_dev->mlock);
> +     mutex_unlock(&st->lock);
>  
>       return ret;
>  }
> @@ -261,7 +264,7 @@ static int ad5360_update_ctrl(struct iio_dev *indio_dev, 
> unsigned int set,
>       struct ad5360_state *st = iio_priv(indio_dev);
>       unsigned int ret;
>  
> -     mutex_lock(&indio_dev->mlock);
> +     mutex_lock(&st->lock);
>  
>       st->ctrl |= set;
>       st->ctrl &= ~clr;
> @@ -269,7 +272,7 @@ static int ad5360_update_ctrl(struct iio_dev *indio_dev, 
> unsigned int set,
>       ret = ad5360_write_unlocked(indio_dev, AD5360_CMD_SPECIAL_FUNCTION,
>                       AD5360_REG_SF_CTRL, st->ctrl, 0);
>  
> -     mutex_unlock(&indio_dev->mlock);
> +     mutex_unlock(&st->lock);
>  
>       return ret;
>  }
> @@ -479,6 +482,8 @@ static int ad5360_probe(struct spi_device *spi)
>       indio_dev->modes = INDIO_DIRECT_MODE;
>       indio_dev->num_channels = st->chip_info->num_channels;
>  
> +     mutex_init(&st->lock);
> +
>       ret = ad5360_alloc_channels(indio_dev);
>       if (ret) {
>               dev_err(&spi->dev, "Failed to allocate channel spec: %d\n", 
> ret);

Reply via email to