On Tue, May 12, 2020 at 6:56 PM Neil Armstrong <narmstr...@baylibre.com> wrote:
>
> The new Khadas VIM2 and VIM3 boards controls the cooling fan via the
> on-board microcontroller.
>
> This implements the FAN control as thermal devices and as cell of the Khadas
> MCU MFD driver.
>
> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
> ---
> drivers/thermal/Kconfig | 10 ++
> drivers/thermal/Makefile | 1 +
> drivers/thermal/khadas_mcu_fan.c | 174 +++++++++++++++++++++++++++++++
> 3 files changed, 185 insertions(+)
> create mode 100644 drivers/thermal/khadas_mcu_fan.c
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 91af271e9bb0..72b3960cc5ac 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -490,4 +490,14 @@ config SPRD_THERMAL
> help
> Support for the Spreadtrum thermal sensor driver in the Linux
> thermal
> framework.
> +
> +config KHADAS_MCU_FAN_THERMAL
> + tristate "Khadas MCU controller FAN cooling support"
> + depends on OF || COMPILE_TEST
Could you add a depends on the some board/SoC Kconfig option here so
this doesn't show up for non-Amlogic/non-Khadas boards?
Looks OK otherwise.
> + select MFD_CORE
> + select REGMAP
> + help
> + If you say yes here you get support for the FAN controlled
> + by the Microcontroller found on the Khadas VIM boards.
> +
> endif
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 8c8ed7b79915..460428c2122c 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -60,3 +60,4 @@ obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o
> obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
> obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
> obj-$(CONFIG_SPRD_THERMAL) += sprd_thermal.o
> +obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL) += khadas_mcu_fan.o
> diff --git a/drivers/thermal/khadas_mcu_fan.c
> b/drivers/thermal/khadas_mcu_fan.c
> new file mode 100644
> index 000000000000..044d4aba8be2
> --- /dev/null
> +++ b/drivers/thermal/khadas_mcu_fan.c
> @@ -0,0 +1,174 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Khadas MCU Controlled FAN driver
> + *
> + * Copyright (C) 2020 BayLibre SAS
> + * Author(s): Neil Armstrong <narmstr...@baylibre.com>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/khadas-mcu.h>
> +#include <linux/regmap.h>
> +#include <linux/sysfs.h>
> +#include <linux/thermal.h>
> +
> +#define MAX_LEVEL 3
> +
> +struct khadas_mcu_fan_ctx {
> + struct khadas_mcu *mcu;
> + unsigned int level;
> + struct thermal_cooling_device *cdev;
> +};
> +
> +static int khadas_mcu_fan_set_level(struct khadas_mcu_fan_ctx *ctx,
> + unsigned int level)
> +{
> + int ret;
> +
> + ret = regmap_write(ctx->mcu->map, KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG,
> + level);
> + if (ret)
> + return ret;
> +
> + ctx->level = level;
> +
> + return 0;
> +}
> +
> +static int khadas_mcu_fan_get_max_state(struct thermal_cooling_device *cdev,
> + unsigned long *state)
> +{
> + struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
> +
> + if (!ctx)
> + return -EINVAL;
> +
> + *state = MAX_LEVEL;
> +
> + return 0;
> +}
> +
> +static int khadas_mcu_fan_get_cur_state(struct thermal_cooling_device *cdev,
> + unsigned long *state)
> +{
> + struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
> +
> + if (!ctx)
> + return -EINVAL;
> +
> + *state = ctx->level;
> +
> + return 0;
> +}
> +
> +static int
> +khadas_mcu_fan_set_cur_state(struct thermal_cooling_device *cdev,
> + unsigned long state)
> +{
> + struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
> +
> + if (!ctx || (state > MAX_LEVEL))
> + return -EINVAL;
> +
> + if (state == ctx->level)
> + return 0;
> +
> + return khadas_mcu_fan_set_level(ctx, state);
> +}
> +
> +static const struct thermal_cooling_device_ops khadas_mcu_fan_cooling_ops = {
> + .get_max_state = khadas_mcu_fan_get_max_state,
> + .get_cur_state = khadas_mcu_fan_get_cur_state,
> + .set_cur_state = khadas_mcu_fan_set_cur_state,
> +};
> +
> +static int khadas_mcu_fan_probe(struct platform_device *pdev)
> +{
> + struct khadas_mcu *mcu = dev_get_drvdata(pdev->dev.parent);
> + struct thermal_cooling_device *cdev;
> + struct device *dev = &pdev->dev;
> + struct khadas_mcu_fan_ctx *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> + ctx->mcu = mcu;
> + platform_set_drvdata(pdev, ctx);
> +
> + cdev = devm_thermal_of_cooling_device_register(dev->parent,
> + dev->parent->of_node, "khadas-mcu-fan", ctx,
> + &khadas_mcu_fan_cooling_ops);
> + if (IS_ERR(cdev)) {
> + ret = PTR_ERR(cdev);
> + dev_err(dev,
> + "Failed to register khadas-mcu-fan as cooling
> device: %d\n",
> + ret);
> + return ret;
> + }
> + ctx->cdev = cdev;
> + thermal_cdev_update(cdev);
> +
> + return 0;
> +}
> +
> +static int khadas_mcu_fan_disable(struct device *dev)
> +{
> + struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
> + unsigned int level_save = ctx->level;
> + int ret;
> +
> + ret = khadas_mcu_fan_set_level(ctx, 0);
> + if (ret)
> + return ret;
> +
> + ctx->level = level_save;
> +
> + return 0;
> +}
> +
> +static void khadas_mcu_fan_shutdown(struct platform_device *pdev)
> +{
> + khadas_mcu_fan_disable(&pdev->dev);
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int khadas_mcu_fan_suspend(struct device *dev)
> +{
> + return khadas_mcu_fan_disable(dev);
> +}
> +
> +static int khadas_mcu_fan_resume(struct device *dev)
> +{
> + struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
> +
> + return khadas_mcu_fan_set_level(ctx, ctx->level);
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(khadas_mcu_fan_pm, khadas_mcu_fan_suspend,
> + khadas_mcu_fan_resume);
> +
> +static const struct platform_device_id khadas_mcu_fan_id_table[] = {
> + { .name = "khadas-mcu-fan-ctrl", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(platform, khadas_mcu_fan_id_table);
> +
> +static struct platform_driver khadas_mcu_fan_driver = {
> + .probe = khadas_mcu_fan_probe,
> + .shutdown = khadas_mcu_fan_shutdown,
> + .driver = {
> + .name = "khadas-mcu-fan-ctrl",
> + .pm = &khadas_mcu_fan_pm,
> + },
> + .id_table = khadas_mcu_fan_id_table,
> +};
> +
> +module_platform_driver(khadas_mcu_fan_driver);
> +
> +MODULE_AUTHOR("Neil Armstrong <narmstr...@baylibre.com>");
> +MODULE_DESCRIPTION("Khadas MCU FAN driver");
> +MODULE_LICENSE("GPL");
> --
> 2.22.0
>
