The enable GPIO for the fixed vibrator regulator shouldn't be
pulled in one direction or the other.
Signed-off-by: Jonathan Bakker <xc-rac...@live.ca>
---
arch/arm/boot/dts/s5pv210-aries.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi
b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 0fa3de3c985d..945259aa5d55 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -52,6 +52,9 @@
regulator-name = "vibrator-en";
enable-active-high;
gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctr-0 = <&vibrator_ena>;
};
touchkey_vdd: regulator-fixed-1 {
@@ -656,6 +659,12 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ vibrator_ena: vibrator-ena {
+ samsung,pins = "gpj1-1";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
touchkey_i2c_pins: touchkey-i2c-pins {
samsung,pins = "gpj3-0", "gpj3-1";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
--
2.20.1
