From: Alan Stern <[email protected]>
commit 94f9c8c3c404ee1f7aaff81ad4f24aec4e34a78b upstream.
Cyril Roelandt reports that his JMicron JMS566 USB-SATA bridge fails
to handle WRITE commands with the FUA bit set, even though it claims
to support FUA. (Oddly enough, a later version of the same bridge,
version 2.03 as opposed to 1.14, doesn't claim to support FUA. Also
oddly, the bridge _does_ support FUA when using the UAS transport
instead of the Bulk-Only transport -- but this device was blacklisted
for uas in commit bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron
SATA enclosure") for apparently unrelated reasons.)
This patch adds a usb-storage unusual_devs entry with the BROKEN_FUA
flag. This allows the bridge to work properly with usb-storage.
Reported-and-tested-by: Cyril Roelandt <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
CC: <[email protected]>
Link:
https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/unusual_devs.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2323,6 +2323,13 @@ UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x
USB_SC_DEVICE,USB_PR_DEVICE,NULL,
US_FL_MAX_SECTORS_64 ),
+/* Reported by Cyril Roelandt <[email protected]> */
+UNUSUAL_DEV( 0x357d, 0x7788, 0x0114, 0x0114,
+ "JMicron",
+ "USB to ATA/ATAPI Bridge",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BROKEN_FUA ),
+
/* Reported by Andrey Rahmatullin <[email protected]> */
UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100,
"iRiver",
