On Thu, Oct 17, 2019 at 03:32:56PM -0400, Stuart Hayes wrote:
> Some systems have in-band presence detection disabled for hot-plug PCI
> slots, but do not report this in the slot capabilities 2 (SLTCAP2) register.
> On these systems, presence detect can become active well after the link is
> reported to be active, which can cause the slots to be disabled after a
> device is connected.
>
> Add a dmi table to flag these systems as having in-band presence disabled.
>
> Signed-off-by: Stuart Hayes <stuart.w.ha...@gmail.com>
> ---
> drivers/pci/hotplug/pciehp_hpc.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c
> b/drivers/pci/hotplug/pciehp_hpc.c
> index 02eb811a014f..4d377a2a62ce 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -14,6 +14,7 @@
>
> #define dev_fmt(fmt) "pciehp: " fmt
>
> +#include <linux/dmi.h>
> #include <linux/kernel.h>
> #include <linux/types.h>
> #include <linux/jiffies.h>
> @@ -26,6 +27,16 @@
> #include "../pci.h"
> #include "pciehp.h"
>
> +static const struct dmi_system_id inband_presence_disabled_dmi_table[] = {
> + {
> + .ident = "Dell System",
> + .matches = {
> + DMI_MATCH(DMI_OEM_STRING, "Dell System"),
Sorry if this has been discussed previously already but isn't this going
to apply on all Dell systems, not just the affected ones? Is this the
intention?
