On 17/10/2019 16.49, Sekhar Nori wrote:
> On 17/10/19 4:39 PM, Sekhar Nori wrote:
>> On 30/08/19 3:52 PM, Peter Ujfalusi wrote:
>>> The codec driver needs correct regulators in order to probe.
>>> Both VCC_3V3 and VCC_1V8 is always on fixed regulators on the board.
>>>
>>> Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
>>
>> Applied for v5.4
>
> This is breaking boot on DM365 EVM.
>
> Booting Linux on physical CPU 0x0
>
> Linux version 5.4.0-rc1-00001-g927d10a85791-dirty (a0875516@psplinux063) (gcc
> v9
> CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
>
> CPU: VIVT data cache, VIVT instruction cache
>
> Machine: DaVinci DM365 EVM
>
> Memory policy: Data cache writethrough
>
> cma: Reserved 16 MiB at 0x86c00000
>
> DaVinci dm365_rev1.1 variant 0x0
>
> On node 0 totalpages: 32768
>
> DMA zone: 256 pages used for memmap
>
> DMA zone: 0 pages reserved
>
> DMA zone: 32768 pages, LIFO batch:7
>
> pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
>
> pcpu-alloc: [0] 0
>
> Built 1 zonelists, mobility grouping on. Total pages: 32512
>
> Kernel command line: console=ttyS0,115200n8 root=/dev/nfs rw
> nfsroot=172.24.210p
> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
>
> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
>
> mem auto-init: stack:off, heap alloc:off, heap free:off
>
> Memory: 106776K/131072K available (4760K kernel code, 253K rwdata, 1160K
> rodata)
> SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>
> rcu: Preemptible hierarchical RCU implementation.
>
> Tasks RCU enabled.
>
> rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
>
> NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
>
> random: get_random_bytes called from start_kernel+0x25c/0x440 with
> crng_init=0
> clocksource: timer0_1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
> 79s
> sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
>
> Console: colour dummy device 80x30
>
> Calibrating delay loop... 146.84 BogoMIPS (lpj=734208)
>
> pid_max: default: 32768 minimum: 301
>
> Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
>
> Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
>
> CPU: Testing write buffer coherency: ok
>
> Setting up static identity map for 0x80008400 - 0x80008458
>
> rcu: Hierarchical SRCU implementation.
>
> devtmpfs: initialized
>
> clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
> 191s
> futex hash table entries: 256 (order: -1, 3072 bytes, linear)
>
> pinctrl core: initialized pinctrl subsystem
>
> NET: Registered protocol family 16
>
> DMA: preallocated 256 KiB pool for atomic coherent allocations
>
> mux: initialized INT_EDMA_CC
>
> mux: Setting register INT_EDMA_CC
>
> mux: INTMUX (0x00000018) = 0x00000000 -> 0x00000004
>
> cpuidle: using governor menu
>
> mux: initialized INT_EMAC_RXTHRESH
>
> mux: Setting register INT_EMAC_RXTHRESH
>
> mux: INTMUX (0x00000018) = 0x00000004 -> 0x00004004
>
> mux: initialized INT_EMAC_RXPULSE
>
> mux: Setting register INT_EMAC_RXPULSE
>
> mux: INTMUX (0x00000018) = 0x00004004 -> 0x0000c004
>
> mux: initialized INT_EMAC_TXPULSE
>
> mux: Setting register INT_EMAC_TXPULSE
>
> mux: INTMUX (0x00000018) = 0x0000c004 -> 0x0001c004
>
> mux: initialized INT_EMAC_MISCPULSE
>
> mux: Setting register INT_EMAC_MISCPULSE
>
> mux: INTMUX (0x00000018) = 0x0001c004 -> 0x0003c004
>
> EVM: tvp5146 SD video input
>
> mux: initialized INT_PRTCSS
>
> mux: Setting register INT_PRTCSS
>
> mux: INTMUX (0x00000018) = 0x0003c004 -> 0x0003c404
>
> mux: initialized SPI0_SCLK
>
> mux: Setting register SPI0_SCLK
>
> mux: PINMUX3 (0x0000000c) = 0x015affff -> 0x115affff
>
> mux: initialized SPI0_SDI
>
> mux: Setting register SPI0_SDI
>
> mux: PINMUX3 (0x0000000c) = 0x115affff -> 0x155affff
>
> mux: initialized SPI0_SDO
>
> mux: Setting register SPI0_SDO
>
> mux: PINMUX3 (0x0000000c) = 0x155affff -> 0x175affff
>
> mux: initialized SPI0_SDENA0
>
> mux: Setting register SPI0_SDENA0
>
> mux: PINMUX3 (0x0000000c) = 0x175affff -> 0x375affff
>
> edma edma.0: Legacy memcpy is enabled, things might not work
>
> edma edma.0: TI EDMA DMA engine driver
>
> 8<--- cut here ---
>
> Unable to handle kernel NULL pointer dereference at virtual address 000000c0
>
> pgd = (ptrval)
>
> [000000c0] *pgd=00000000
>
> Internal error: Oops: 5 [#1] PREEMPT ARM
>
> Modules linked in:
>
> CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0-rc1-00001-g927d10a85791-dirty
> #146
> Hardware name: DaVinci DM365 EVM
>
> PC is at reg_fixed_voltage_probe+0x30/0x2ec
>
> LR is at reg_fixed_voltage_probe+0x2c/0x2ec
>
> pc : [<c02a9628>] lr : [<c02a9624>] psr: 60000053
>
> sp : c6837de0 ip : 00000000 fp : c062cfd8
>
> r10: c05f44a8 r9 : 00000000 r8 : c68a24d0
>
> r7 : c0631008 r6 : c68a24e0 r5 : 00000000 r4 : c68a24e0
>
> r3 : 00000000 r2 : c065a854 r1 : 00000000 r0 : 00000000
>
> Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none
>
> Control: 0005317f Table: 80004000 DAC: 00000053
>
> Process swapper (pid: 1, stack limit = 0x(ptrval))
>
> Stack: (0xc6837de0 to 0xc6838000)
>
> 7de0: c689be40 c0167044 00000000 c68f4720 c68f4660 c68f4660 c68f4720 c689be40
>
> 7e00: c0575ca4 64d9cb0d 00000000 c68a24e0 00000000 c065a854 c065a854 00000000
>
> 7e20: 00000000 c05f44a8 c062cfd8 c02e0a64 c68a24e0 c0688d00 00000000 c02dec54
>
> 7e40: c68a24e0 c065a854 c065a854 c0631008 ffffe000 c061e828 c05f44a8 c02def44
>
> 7e60: 00000000 ffffff08 ffff0a00 c68a24e0 00000000 c065a854 c0631008 ffffe000
>
> 7e80: c061e828 c05f44a8 c062cfd8 c02df1f8 00000000 c065a854 c68a24e0 c02df258
>
> 7ea0: c68337b0 c065a854 c02df200 c02dced4 c061e828 c681db90 c68337b0 64d9cb0d
>
> 7ec0: c062cfd8 c065a854 c682af00 c065ea48 00000000 c02de070 c054f984 c0494cc0
>
> 7ee0: c065a854 c065a854 c0631008 c060b098 00000000 c02dfb04 c066d5c0 c0631008
>
> 7f00: c060b098 c000a624 0000007f c7fffea8 c05d00c4 00000000 c7fffee9 c00372e0
>
> 7f20: c05cf6d8 c0549714 00000000 00000004 00000004 00000000 00000000 c7fffee2
>
> 7f40: c7fffee5 64d9cb0d 00000000 0000007f c061e844 64d9cb0d 0000007f c061e848
>
> 7f60: 00000005 c066d5c0 c066d5c0 c05f4e6c 00000004 00000004 00000000 c05f44a8
>
> 7f80: 00000000 00000000 c04a71bc 00000000 00000000 00000000 00000000 00000000
>
> 7fa0: 00000000 c04a71c4 00000000 c00090e0 00000000 00000000 00000000 00000000
>
> 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>
> 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
>
> [<c02a9628>] (reg_fixed_voltage_probe) from [<c02e0a64>]
> (platform_drv_probe+0x)
> [<c02e0a64>] (platform_drv_probe) from [<c02dec54>]
> (really_probe+0x1e0/0x34c)
> [<c02dec54>] (really_probe) from [<c02def44>]
> (driver_probe_device+0x5c/0x168)
> [<c02def44>] (driver_probe_device) from [<c02df1f8>]
> (device_driver_attach+0x58)
> [<c02df1f8>] (device_driver_attach) from [<c02df258>]
> (__driver_attach+0x58/0xc)
> [<c02df258>] (__driver_attach) from [<c02dced4>] (bus_for_each_dev+0x70/0xb4)
>
> [<c02dced4>] (bus_for_each_dev) from [<c02de070>]
> (bus_add_driver+0x194/0x1cc)
> [<c02de070>] (bus_add_driver) from [<c02dfb04>] (driver_register+0x74/0x108)
>
> [<c02dfb04>] (driver_register) from [<c000a624>] (do_one_initcall+0x6c/0x1d8)
>
> [<c000a624>] (do_one_initcall) from [<c05f4e6c>]
> (kernel_init_freeable+0x10c/0x)
> [<c05f4e6c>] (kernel_init_freeable) from [<c04a71c4>] (kernel_init+0x8/0xec)
>
> [<c04a71c4>] (kernel_init) from [<c00090e0>] (ret_from_fork+0x14/0x34)
>
> Exception stack(0xc6837fb0 to 0xc6837ff8)
>
> 7fa0: 00000000 00000000 00000000 00000000
>
> 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>
> 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000
>
> Code: e5920018 e58d3024 eb02b71e e3a03000 (e59090c0)
>
> ---[ end trace 90e87368a248f7f6 ]---
>
> Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Interesting.
Something has changed in regulators core which causes crash when not
booted with DT?
It did worked when I have sent the patches. I'll take a look what might
be the issue.
Same for the dma644x
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
