Re: [PATCH 1/2] arm64: dts: imx8mm-evk: add phy-reset-gpios for fec1

[Marco Felsch]

Hi,

On 19-10-21 09:21, Peng Fan wrote:
> From: Peng Fan <peng....@nxp.com>
> 
> We should not rely on U-Boot to configure the phy reset.
> So introduce phy-reset-gpios property to let Linux handle phy reset
> itself.
> 
> Signed-off-by: Peng Fan <peng....@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts 
> b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> index faefb7182af1..e4d66f7db09d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> @@ -80,6 +80,7 @@
>       pinctrl-0 = <&pinctrl_fec1>;
>       phy-mode = "rgmii-id";
>       phy-handle = <&ethphy0>;
> +     phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;

Where is the pinctrl done?

Regards,
  Marco

>       fsl,magic-packet;
>       status = "okay";
>  
> -- 
> 2.16.4
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |