handle_simple_irq() expect interrupts to be disabled. The USB
framework is using threaded interrupts, which implies that interrupts
are re-enabled as soon as it has run.
This reverts the changes from cc89c323a30e ("lan78xx: Use irq_domain
for phy interrupt from USB Int. EP").
[ 4.886203] 000: irq 79 handler irq_default_primary_handler+0x0/0x8 enabled
interrupts
[ 4.886243] 000: WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:152
__handle_irq_event_percpu+0x154/0x168
[ 4.896294] 000: Modules linked in:
[ 4.896301] 000: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.6 #39
[ 4.896310] 000: Hardware name: Raspberry Pi 3 Model B+ (DT)
[ 4.896315] 000: pstate: 60000005 (nZCv daif -PAN -UAO)
[ 4.896321] 000: pc : __handle_irq_event_percpu+0x154/0x168
[ 4.896331] 000: lr : __handle_irq_event_percpu+0x154/0x168
[ 4.896339] 000: sp : ffff000010003cc0
[ 4.896346] 000: x29: ffff000010003cc0 x28: 0000000000000060
[ 4.896355] 000: x27: ffff000011021980 x26: ffff00001189c72b
[ 4.896364] 000: x25: ffff000011702bc0 x24: ffff800036d6e400
[ 4.896373] 000: x23: 000000000000004f x22: ffff000010003d64
[ 4.896381] 000: x21: 0000000000000000 x20: 0000000000000002
[ 4.896390] 000: x19: ffff8000371c8480 x18: 0000000000000060
[ 4.896398] 000: x17: 0000000000000000 x16: 00000000000000eb
[ 4.896406] 000: x15: ffff000011712d18 x14: 7265746e69206465
[ 4.896414] 000: x13: ffff000010003ba0 x12: ffff000011712df0
[ 4.896422] 000: x11: 0000000000000001 x10: ffff000011712e08
[ 4.896430] 000: x9 : 0000000000000001 x8 : 000000000003c920
[ 4.896437] 000: x7 : ffff0000118cc410 x6 : ffff0000118c7f00
[ 4.896445] 000: x5 : 000000000003c920 x4 : 0000000000004510
[ 4.896453] 000: x3 : ffff000011712dc8 x2 : 0000000000000000
[ 4.896461] 000: x1 : 73a3f67df94c1500 x0 : 0000000000000000
[ 4.896466] 000: Call trace:
[ 4.896471] 000: __handle_irq_event_percpu+0x154/0x168
[ 4.896481] 000: handle_irq_event_percpu+0x50/0xb0
[ 4.896489] 000: handle_irq_event+0x40/0x98
[ 4.896497] 000: handle_simple_irq+0xa4/0xf0
[ 4.896505] 000: generic_handle_irq+0x24/0x38
[ 4.896513] 000: intr_complete+0xb0/0xe0
[ 4.896525] 000: __usb_hcd_giveback_urb+0x58/0xd8
[ 4.896533] 000: usb_giveback_urb_bh+0xd0/0x170
[ 4.896539] 000: tasklet_action_common.isra.0+0x9c/0x128
[ 4.896549] 000: tasklet_hi_action+0x24/0x30
[ 4.896556] 000: __do_softirq+0x120/0x23c
[ 4.896564] 000: irq_exit+0xb8/0xd8
[ 4.896571] 000: __handle_domain_irq+0x64/0xb8
[ 4.896579] 000: bcm2836_arm_irqchip_handle_irq+0x60/0xc0
[ 4.896586] 000: el1_irq+0xb8/0x140
[ 4.896592] 000: arch_cpu_idle+0x10/0x18
[ 4.896601] 000: do_idle+0x200/0x280
[ 4.896608] 000: cpu_startup_entry+0x20/0x28
[ 4.896615] 000: rest_init+0xb4/0xc0
[ 4.896623] 000: arch_call_rest_init+0xc/0x14
[ 4.896632] 000: start_kernel+0x454/0x480
[dwagner: Updated Jisheng's initial patch]
Fixes: cc89c323a30e ("lan78xx: Use irq_domain for phy interrupt from USB Int.
EP")
Cc: Woojung Huh <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Stefan Wahren <[email protected]>
Cc: Jisheng Zhang <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Daniel Wagner <[email protected]>
---
Hi,
With Andrew's "net: usb: lan78xx: Connect PHY before registering MAC"
and this patch I am able to boot and use the RPi3 with -rt.
There was already a lot of dicussion on this topic but no fixes so
far. So I just suggest to revert the original commit since it is not
clear to me what it fixes:
https://www.spinics.net/lists/netdev/msg542290.html
https://marc.info/?l=linux-netdev&m=154604180927252&w=2
https://patchwork.kernel.org/patch/10888797/
Without this revert RPi3 is not usable for -rt at this point.
Thanks,
Daniel
drivers/net/usb/lan78xx.c | 208 +++-----------------------------------
1 file changed, 16 insertions(+), 192 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 58f5a219fb65..f96c7ff3edd4 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -20,10 +20,6 @@
#include <linux/mdio.h>
#include <linux/phy.h>
#include <net/ip6_checksum.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/irq.h>
-#include <linux/irqchip/chained_irq.h>
#include <linux/microchipphy.h>
#include <linux/phy_fixed.h>
#include <linux/of_mdio.h>
@@ -87,38 +83,6 @@
/* statistic update interval (mSec) */
#define STAT_UPDATE_TIMER (1 * 1000)
-/* defines interrupts from interrupt EP */
-#define MAX_INT_EP (32)
-#define INT_EP_INTEP (31)
-#define INT_EP_OTP_WR_DONE (28)
-#define INT_EP_EEE_TX_LPI_START (26)
-#define INT_EP_EEE_TX_LPI_STOP (25)
-#define INT_EP_EEE_RX_LPI (24)
-#define INT_EP_MAC_RESET_TIMEOUT (23)
-#define INT_EP_RDFO (22)
-#define INT_EP_TXE (21)
-#define INT_EP_USB_STATUS (20)
-#define INT_EP_TX_DIS (19)
-#define INT_EP_RX_DIS (18)
-#define INT_EP_PHY (17)
-#define INT_EP_DP (16)
-#define INT_EP_MAC_ERR (15)
-#define INT_EP_TDFU (14)
-#define INT_EP_TDFO (13)
-#define INT_EP_UTX (12)
-#define INT_EP_GPIO_11 (11)
-#define INT_EP_GPIO_10 (10)
-#define INT_EP_GPIO_9 (9)
-#define INT_EP_GPIO_8 (8)
-#define INT_EP_GPIO_7 (7)
-#define INT_EP_GPIO_6 (6)
-#define INT_EP_GPIO_5 (5)
-#define INT_EP_GPIO_4 (4)
-#define INT_EP_GPIO_3 (3)
-#define INT_EP_GPIO_2 (2)
-#define INT_EP_GPIO_1 (1)
-#define INT_EP_GPIO_0 (0)
-
static const char lan78xx_gstrings[][ETH_GSTRING_LEN] = {
"RX FCS Errors",
"RX Alignment Errors",
@@ -350,15 +314,6 @@ struct statstage {
struct lan78xx_statstage64 curr_stat;
};
-struct irq_domain_data {
- struct irq_domain *irqdomain;
- unsigned int phyirq;
- struct irq_chip *irqchip;
- irq_flow_handler_t irq_handler;
- u32 irqenable;
- struct mutex irq_lock; /* for irq bus access */
-};
-
struct lan78xx_net {
struct net_device *net;
struct usb_device *udev;
@@ -415,8 +370,6 @@ struct lan78xx_net {
int delta;
struct statstage stats;
-
- struct irq_domain_data domain_data;
};
/* define external phy id */
@@ -1251,6 +1204,7 @@ static void lan78xx_defer_kevent(struct lan78xx_net *dev,
int work)
static void lan78xx_status(struct lan78xx_net *dev, struct urb *urb)
{
u32 intdata;
+ struct phy_device *phydev = dev->net->phydev;
if (urb->actual_length != 4) {
netdev_warn(dev->net,
@@ -1264,8 +1218,7 @@ static void lan78xx_status(struct lan78xx_net *dev,
struct urb *urb)
netif_dbg(dev, link, dev->net, "PHY INTR: 0x%08x\n", intdata);
lan78xx_defer_kevent(dev, EVENT_LINK_RESET);
- if (dev->domain_data.phyirq > 0)
- generic_handle_irq(dev->domain_data.phyirq);
+ phy_mac_interrupt(phydev);
} else
netdev_warn(dev->net,
"unexpected interrupt: 0x%08x\n", intdata);
@@ -1874,127 +1827,6 @@ static void lan78xx_link_status_change(struct
net_device *net)
}
}
-static int irq_map(struct irq_domain *d, unsigned int irq,
- irq_hw_number_t hwirq)
-{
- struct irq_domain_data *data = d->host_data;
-
- irq_set_chip_data(irq, data);
- irq_set_chip_and_handler(irq, data->irqchip, data->irq_handler);
- irq_set_noprobe(irq);
-
- return 0;
-}
-
-static void irq_unmap(struct irq_domain *d, unsigned int irq)
-{
- irq_set_chip_and_handler(irq, NULL, NULL);
- irq_set_chip_data(irq, NULL);
-}
-
-static const struct irq_domain_ops chip_domain_ops = {
- .map = irq_map,
- .unmap = irq_unmap,
-};
-
-static void lan78xx_irq_mask(struct irq_data *irqd)
-{
- struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
-
- data->irqenable &= ~BIT(irqd_to_hwirq(irqd));
-}
-
-static void lan78xx_irq_unmask(struct irq_data *irqd)
-{
- struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
-
- data->irqenable |= BIT(irqd_to_hwirq(irqd));
-}
-
-static void lan78xx_irq_bus_lock(struct irq_data *irqd)
-{
- struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
-
- mutex_lock(&data->irq_lock);
-}
-
-static void lan78xx_irq_bus_sync_unlock(struct irq_data *irqd)
-{
- struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
- struct lan78xx_net *dev =
- container_of(data, struct lan78xx_net, domain_data);
- u32 buf;
- int ret;
-
- /* call register access here because irq_bus_lock & irq_bus_sync_unlock
- * are only two callbacks executed in non-atomic contex.
- */
- ret = lan78xx_read_reg(dev, INT_EP_CTL, &buf);
- if (buf != data->irqenable)
- ret = lan78xx_write_reg(dev, INT_EP_CTL, data->irqenable);
-
- mutex_unlock(&data->irq_lock);
-}
-
-static struct irq_chip lan78xx_irqchip = {
- .name = "lan78xx-irqs",
- .irq_mask = lan78xx_irq_mask,
- .irq_unmask = lan78xx_irq_unmask,
- .irq_bus_lock = lan78xx_irq_bus_lock,
- .irq_bus_sync_unlock = lan78xx_irq_bus_sync_unlock,
-};
-
-static int lan78xx_setup_irq_domain(struct lan78xx_net *dev)
-{
- struct device_node *of_node;
- struct irq_domain *irqdomain;
- unsigned int irqmap = 0;
- u32 buf;
- int ret = 0;
-
- of_node = dev->udev->dev.parent->of_node;
-
- mutex_init(&dev->domain_data.irq_lock);
-
- lan78xx_read_reg(dev, INT_EP_CTL, &buf);
- dev->domain_data.irqenable = buf;
-
- dev->domain_data.irqchip = &lan78xx_irqchip;
- dev->domain_data.irq_handler = handle_simple_irq;
-
- irqdomain = irq_domain_add_simple(of_node, MAX_INT_EP, 0,
- &chip_domain_ops, &dev->domain_data);
- if (irqdomain) {
- /* create mapping for PHY interrupt */
- irqmap = irq_create_mapping(irqdomain, INT_EP_PHY);
- if (!irqmap) {
- irq_domain_remove(irqdomain);
-
- irqdomain = NULL;
- ret = -EINVAL;
- }
- } else {
- ret = -EINVAL;
- }
-
- dev->domain_data.irqdomain = irqdomain;
- dev->domain_data.phyirq = irqmap;
-
- return ret;
-}
-
-static void lan78xx_remove_irq_domain(struct lan78xx_net *dev)
-{
- if (dev->domain_data.phyirq > 0) {
- irq_dispose_mapping(dev->domain_data.phyirq);
-
- if (dev->domain_data.irqdomain)
- irq_domain_remove(dev->domain_data.irqdomain);
- }
- dev->domain_data.phyirq = 0;
- dev->domain_data.irqdomain = NULL;
-}
-
static int lan8835_fixup(struct phy_device *phydev)
{
int buf;
@@ -2123,16 +1955,15 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
return -EIO;
}
- /* if phyirq is not set, use polling mode in phylib */
- if (dev->domain_data.phyirq > 0)
- phydev->irq = dev->domain_data.phyirq;
- else
- phydev->irq = 0;
- netdev_dbg(dev->net, "phydev->irq = %d\n", phydev->irq);
-
/* set to AUTOMDIX */
phydev->mdix = ETH_TP_MDI_AUTO;
+ ret = phy_read(phydev, LAN88XX_INT_STS);
+ ret = phy_write(phydev, LAN88XX_INT_MASK,
+ LAN88XX_INT_MASK_MDINTPIN_EN_ |
+ LAN88XX_INT_MASK_LINK_CHANGE_);
+ phydev->irq = PHY_IGNORE_INTERRUPT;
+
ret = phy_connect_direct(dev->net, phydev,
lan78xx_link_status_change,
dev->interface);
@@ -2570,6 +2401,11 @@ static int lan78xx_reset(struct lan78xx_net *dev)
}
ret = lan78xx_write_reg(dev, MAC_CR, buf);
+ /* enable PHY interrupts */
+ ret = lan78xx_read_reg(dev, INT_EP_CTL, &buf);
+ buf |= INT_ENP_PHY_INT;
+ ret = lan78xx_write_reg(dev, INT_EP_CTL, buf);
+
ret = lan78xx_read_reg(dev, MAC_TX, &buf);
buf |= MAC_TX_TXEN_;
ret = lan78xx_write_reg(dev, MAC_TX, buf);
@@ -2977,13 +2813,6 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct
usb_interface *intf)
dev->net->hw_features = dev->net->features;
- ret = lan78xx_setup_irq_domain(dev);
- if (ret < 0) {
- netdev_warn(dev->net,
- "lan78xx_setup_irq_domain() failed : %d", ret);
- goto out1;
- }
-
dev->net->hard_header_len += TX_OVERHEAD;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
@@ -2991,13 +2820,13 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct
usb_interface *intf)
ret = lan78xx_reset(dev);
if (ret) {
netdev_warn(dev->net, "Registers INIT FAILED....");
- goto out2;
+ goto out;
}
ret = lan78xx_mdio_init(dev);
if (ret) {
netdev_warn(dev->net, "MDIO INIT FAILED.....");
- goto out2;
+ goto out;
}
dev->net->flags |= IFF_MULTICAST;
@@ -3006,10 +2835,7 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct
usb_interface *intf)
return ret;
-out2:
- lan78xx_remove_irq_domain(dev);
-
-out1:
+out:
netdev_warn(dev->net, "Bind routine FAILED");
cancel_work_sync(&pdata->set_multicast);
cancel_work_sync(&pdata->set_vlan);
@@ -3021,8 +2847,6 @@ static void lan78xx_unbind(struct lan78xx_net *dev,
struct usb_interface *intf)
{
struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
- lan78xx_remove_irq_domain(dev);
-
lan78xx_remove_mdio(dev);
if (pdata) {
--
2.21.0
