On Wed, Oct 09, 2019 at 05:40:23PM -0700, Jakub Kicinski wrote:
> On Tue, 8 Oct 2019 16:05:41 +0200, Lars Poeschel wrote:
> > There is a problem in the initialisation and setup of the pn533: It
> > registers with nfc too early. It could happen, that it finished
> > registering with nfc and someone starts using it. But setup of the pn533
> > is not yet finished. Bad or at least unintended things could happen.
> > So I split out nfc registering (and unregistering) to seperate functions
> > that have to be called late in probe then.
> >
> > Cc: Johan Hovold <jo...@kernel.org>
> > Cc: Claudiu Beznea <claudiu.bez...@microchip.com>
> > Signed-off-by: Lars Poeschel <poesc...@lemonage.de>
>
> > diff --git a/drivers/nfc/pn533/i2c.c b/drivers/nfc/pn533/i2c.c
> > index 1abd40398a5a..e9e5a1ec8857 100644
> > --- a/drivers/nfc/pn533/i2c.c
> > +++ b/drivers/nfc/pn533/i2c.c
> > @@ -193,12 +193,10 @@ static int pn533_i2c_probe(struct i2c_client *client,
> > phy->i2c_dev = client;
> > i2c_set_clientdata(client, phy);
> >
> > - priv = pn533_register_device(PN533_DEVICE_PN532,
> > - PN533_NO_TYPE_B_PROTOCOLS,
> > + priv = pn53x_common_init(PN533_DEVICE_PN532,
> > PN533_PROTO_REQ_ACK_RESP,
> > phy, &i2c_phy_ops, NULL,
> > - &phy->i2c_dev->dev,
> > - &client->dev);
> > + &phy->i2c_dev->dev);
>
> nit: start of continuation lines should match the opening parenthesis,
> please run checkpatch and fix the style issue
Ok, I will change that.
> > if (IS_ERR(priv)) {
> > r = PTR_ERR(priv);
> > @@ -220,13 +218,17 @@ static int pn533_i2c_probe(struct i2c_client *client,
> > if (r)
> > goto fn_setup_err;
> >
> > - return 0;
> > + r = pn53x_register_nfc(priv, PN533_NO_TYPE_B_PROTOCOLS, &client->dev);
> > + if (r)
> > + goto fn_setup_err;
> > +
> > + return r;
> >
> > fn_setup_err:
> > free_irq(client->irq, phy);
> >
> > irq_rqst_err:
> > - pn533_unregister_device(phy->priv);
> > + pn53x_common_clean(phy->priv);
> >
> > return r;
> > }
> > @@ -239,7 +241,8 @@ static int pn533_i2c_remove(struct i2c_client *client)
> >
> > free_irq(client->irq, phy);
> >
> > - pn533_unregister_device(phy->priv);
> > + pn53x_unregister_nfc(phy->priv);
> > + pn53x_common_clean(phy->priv);
> >
> > return 0;
> > }
> > diff --git a/drivers/nfc/pn533/pn533.c b/drivers/nfc/pn533/pn533.c
> > index 64836c727aee..e5d5e4c83a04 100644
> > --- a/drivers/nfc/pn533/pn533.c
> > +++ b/drivers/nfc/pn533/pn533.c
> > @@ -2590,14 +2590,12 @@ int pn533_finalize_setup(struct pn533 *dev)
> > }
> > EXPORT_SYMBOL_GPL(pn533_finalize_setup);
> >
> > -struct pn533 *pn533_register_device(u32 device_type,
> > - u32 protocols,
> > +struct pn533 *pn53x_common_init(u32 device_type,
> > enum pn533_protocol_type protocol_type,
> > void *phy,
> > struct pn533_phy_ops *phy_ops,
> > struct pn533_frame_ops *fops,
> > - struct device *dev,
> > - struct device *parent)
> > + struct device *dev)
> > {
> > struct pn533 *priv;
> > int rc = -ENOMEM;
> > @@ -2638,43 +2636,18 @@ struct pn533 *pn533_register_device(u32 device_type,
> > skb_queue_head_init(&priv->fragment_skb);
> >
> > INIT_LIST_HEAD(&priv->cmd_queue);
> > -
> > - priv->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols,
> > - priv->ops->tx_header_len +
> > - PN533_CMD_DATAEXCH_HEAD_LEN,
> > - priv->ops->tx_tail_len);
> > - if (!priv->nfc_dev) {
> > - rc = -ENOMEM;
> > - goto destroy_wq;
> > - }
> > -
> > - nfc_set_parent_dev(priv->nfc_dev, parent);
> > - nfc_set_drvdata(priv->nfc_dev, priv);
> > -
> > - rc = nfc_register_device(priv->nfc_dev);
> > - if (rc)
> > - goto free_nfc_dev;
>
> Aren't you moving too much out of here? Looking at commit 32ecc75ded72
> ("NFC: pn533: change order operations in dev registation") it seems like
> IRQ handler may want to access the data structures, do this change not
> reintroduce the problem?
Yes, you are right, there could be a problem if an irq gets served
before the driver is registered to the nfc subsystem.
Well, but the purpose of this patch is exactly that: Prevent use of nfc
subsystem before the chip is fully initialized.
To address this, I would not change the part above, but move the
request_threaded_irq to the very bottom in pn533_i2c_probe, after the
call to pn53x_register_nfc. So it is not possible to use nfc before the
chip is initialized and irqs don't get served before the driver is
registered to nfc subsystem.
Thank you for this!
I will include this in v10 of the patchset.
> > return priv;
> >
> > -free_nfc_dev:
> > - nfc_free_device(priv->nfc_dev);
> > -
> > -destroy_wq:
> > - destroy_workqueue(priv->wq);
> > error:
> > kfree(priv);
> > return ERR_PTR(rc);
> > }
> > -EXPORT_SYMBOL_GPL(pn533_register_device);
> > +EXPORT_SYMBOL_GPL(pn53x_common_init);
> >
> > -void pn533_unregister_device(struct pn533 *priv)
> > +void pn53x_common_clean(struct pn533 *priv)
> > {
> > struct pn533_cmd *cmd, *n;
> >
> > - nfc_unregister_device(priv->nfc_dev);
> > - nfc_free_device(priv->nfc_dev);
> > -
> > flush_delayed_work(&priv->poll_work);
> > destroy_workqueue(priv->wq);
> >
>
