Rather than call the internal s3c_gpio_cfgall_range() function
through a platform header, move the code into the set_power
callback that is already exported by the board, and add
a default implementation.
In DT mode, the code already does not set the pin config,
so nothing changes there.
Signed-off-by: Arnd Bergmann <a...@arndb.de>
---
arch/arm/mach-s3c24xx/include/mach/pm-core.h | 1 +
arch/arm/mach-s3c24xx/mach-amlm5900.c | 15 +++++
arch/arm/mach-s3c24xx/mach-at2440evb.c | 10 ++-
arch/arm/mach-s3c24xx/mach-gta02.c | 15 +++++
arch/arm/mach-s3c24xx/mach-h1940.c | 8 +++
arch/arm/mach-s3c24xx/mach-mini2440.c | 9 ++-
arch/arm/mach-s3c24xx/mach-n30.c | 9 +++
arch/arm/mach-s3c24xx/mach-qt2410.c | 15 +++++
arch/arm/mach-s3c24xx/mach-rx1950.c | 9 +++
arch/arm/mach-s3c24xx/mach-tct_hammer.c | 15 +++++
arch/arm/plat-samsung/devs.c | 29 ++++++++
drivers/mmc/host/s3cmci.c | 69 +++++---------------
include/linux/platform_data/mmc-s3cmci.h | 2 +
13 files changed, 152 insertions(+), 54 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/include/mach/pm-core.h
b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
index 8f87606c4cdc..a22b4a37ee57 100644
--- a/arch/arm/mach-s3c24xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
@@ -12,6 +12,7 @@
#include "regs-clock.h"
#include "regs-irq.h"
+#include <mach/irqs.h>
static inline void s3c_pm_debug_init_uart(void)
{
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c
b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 9a9daf526d0c..40ad23b52bc0 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -13,6 +13,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/platform_device.h>
@@ -124,6 +125,19 @@ static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
}
};
+static struct gpiod_lookup_table amlm5900_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
static struct platform_device *amlm5900_devices[] __initdata = {
#ifdef CONFIG_FB_S3C2410
@@ -219,6 +233,7 @@ static void __init amlm5900_init(void)
s3c24xx_fb_set_platdata(&amlm5900_fb_info);
#endif
s3c_i2c0_set_platdata(NULL);
+ gpiod_add_lookup_table(&amlm5900_mmc_gpio_table);
platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
}
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c
b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 58c5ef3cf1d7..3a793aaf2cba 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -136,7 +136,7 @@ static struct platform_device at2440evb_device_eth = {
};
static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
- /* Intentionally left blank */
+ .set_power = s3c24xx_mci_def_set_power,
};
static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
@@ -144,10 +144,18 @@ static struct gpiod_lookup_table at2440evb_mci_gpio_table
= {
.table = {
/* Card detect S3C2410_GPG(10) */
GPIO_LOOKUP("GPG", 10, "cd", GPIO_ACTIVE_LOW),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
+
/* 7" LCD panel */
static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c
b/arch/arm/mach-s3c24xx/mach-gta02.c
index 1ca0460d82f4..61b8c6badeb8 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -489,6 +489,20 @@ static struct platform_device gta02_audio = {
.id = -1,
};
+static struct gpiod_lookup_table gta02_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init gta02_map_io(void)
{
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
@@ -545,6 +559,7 @@ static void __init gta02_machine_init(void)
S3C_GPIO_PULL_NONE);
gpiod_add_lookup_table(>a02_audio_gpio_table);
+ gpiod_add_lookup_table(>a02_mmc_gpio_table);
platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
pm_power_off = gta02_poweroff;
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c
b/arch/arm/mach-s3c24xx/mach-h1940.c
index 11f705fb5e32..24f785da7659 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -462,6 +462,7 @@ static void h1940_set_mmc_power(unsigned char power_mode,
unsigned short vdd)
static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
.set_power = h1940_set_mmc_power,
.ocr_avail = MMC_VDD_32_33,
+ .set_power = s3c24xx_mci_def_set_power,
};
static struct gpiod_lookup_table h1940_mmc_gpio_table = {
@@ -471,6 +472,13 @@ static struct gpiod_lookup_table h1940_mmc_gpio_table = {
GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
/* Write protect S3C2410_GPH(8) */
GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c
b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 894d43ff94f1..5c000efdf0e8 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -236,7 +236,7 @@ static struct s3c2410fb_mach_info mini2440_fb_info
__initdata = {
static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
.wprotect_invert = 1,
- .set_power = NULL,
+ .set_power = s3c24xx_mci_def_set_power,
.ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
};
@@ -247,6 +247,13 @@ static struct gpiod_lookup_table mini2440_mmc_gpio_table =
{
GPIO_LOOKUP("GPG", 8, "cd", GPIO_ACTIVE_LOW),
/* Write protect S3C2410_GPH(8) */
GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_HIGH),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 5f5ca4b7015c..8d7ad61e9930 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -339,6 +339,8 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
{
+ s3c24xx_mci_def_set_power(power_mode, vdd);
+
switch (power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
@@ -364,6 +366,13 @@ static struct gpiod_lookup_table n30_mci_gpio_table = {
/* Write protect S3C2410_GPG(10) */
GPIO_LOOKUP("GPG", 10, "wp", GPIO_ACTIVE_LOW),
{ },
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
},
};
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c
b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 6686f02a3f4f..9b47b8434f10 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -219,6 +219,20 @@ static struct gpiod_lookup_table qt2410_spi_gpiod_table = {
},
};
+static struct gpiod_lookup_table qt2410_mmc_gpiod_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
/* Board devices */
static struct platform_device *qt2410_devices[] __initdata = {
@@ -342,6 +356,7 @@ static void __init qt2410_machine_init(void)
s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
S3C_GPIO_PULL_NONE);
gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
+ gpiod_add_lookup_table(&qt2410_mmc_gpiod_table);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
s3c_pm_init();
}
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c
b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 4eeede398775..820e626f5129 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -545,6 +545,8 @@ static struct platform_device rx1950_backlight = {
static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
{
+ s3c24xx_mci_def_set_power(power_mode, vdd);
+
switch (power_mode) {
case MMC_POWER_OFF:
gpio_direction_output(S3C2410_GPJ(1), 0);
@@ -570,6 +572,13 @@ static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
/* Write protect S3C2410_GPH(8) */
GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 8d8ddd6ea305..d6dbbe6759bc 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -7,6 +7,7 @@
// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
// Ben Dooks <b...@simtec.co.uk>
+#include <linux/gpio/machine.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -103,6 +104,19 @@ static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
}
};
+static struct gpiod_lookup_table tct_hammer_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
static struct platform_device *tct_hammer_devices[] __initdata = {
&s3c_device_adc,
@@ -131,6 +145,7 @@ static void __init tct_hammer_init_time(void)
static void __init tct_hammer_init(void)
{
s3c_i2c0_set_platdata(NULL);
+ gpiod_add_lookup_table(&tct_hammer_mmc_gpio_table);
platform_add_devices(tct_hammer_devices,
ARRAY_SIZE(tct_hammer_devices));
}
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index ddd90f0bb380..c0739bda060b 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -5,6 +5,7 @@
//
// Base SAMSUNG platform device definitions
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -40,6 +41,8 @@
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/map.h>
+#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/cpu.h>
@@ -833,16 +836,42 @@ struct platform_device s3c_device_rtc = {
/* SDI */
#ifdef CONFIG_PLAT_S3C24XX
+void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd)
+{
+ switch (power_mode) {
+ case MMC_POWER_ON:
+ case MMC_POWER_UP:
+ /* Configure GPE5...GPE10 pins in SD mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ break;
+
+ case MMC_POWER_OFF:
+ default:
+ gpio_direction_output(S3C2410_GPE(5), 0);
+ break;
+ }
+}
+
static struct resource s3c_sdi_resource[] = {
[0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
[1] = DEFINE_RES_IRQ(IRQ_SDI),
};
+static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
+ /* This is currently here to avoid a number of if (host->pdata)
+ * checks. Any zero fields to ensure reasonable defaults are picked. */
+ .no_wprotect = 1,
+ .no_detect = 1,
+ .set_power = s3c24xx_mci_def_set_power,
+};
+
struct platform_device s3c_device_sdi = {
.name = "s3c2410-sdi",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_sdi_resource),
.resource = s3c_sdi_resource,
+ .dev.platform_data = &s3cmci_def_pdata,
};
void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index bce9c33bc4b5..c2b46640a78b 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -25,9 +25,7 @@
#include <linux/of_device.h>
#include <linux/mmc/slot-gpio.h>
-#include <plat/gpio-cfg.h>
#include <mach/dma.h>
-#include <mach/gpio-samsung.h>
#include <linux/platform_data/mmc-s3cmci.h>
@@ -307,7 +305,8 @@ static inline void clear_imask(struct s3cmci_host *host)
static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
{
if (host->sdio_irqen) {
- if (gpio_get_value(S3C2410_GPE(8)) == 0) {
+ if (host->pdata->bus[3] &&
+ gpiod_get_value(host->pdata->bus[3]) == 0) {
pr_debug("%s: signalling irq\n", __func__);
mmc_signal_sdio_irq(host->mmc);
}
@@ -1213,33 +1212,20 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct
mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
- /* Configure GPE5...GPE10 pins in SD mode */
- if (!host->pdev->dev.of_node)
- s3c_gpio_cfgall_range(S3C2410_GPE(5), 6,
S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
- if (host->pdata->set_power)
- host->pdata->set_power(ios->power_mode, ios->vdd);
-
if (!host->is2440)
mci_con |= S3C2410_SDICON_FIFORESET;
-
break;
case MMC_POWER_OFF:
default:
- if (!host->pdev->dev.of_node)
- gpio_direction_output(S3C2410_GPE(5), 0);
-
if (host->is2440)
mci_con |= S3C2440_SDICON_SDRESET;
-
- if (host->pdata->set_power)
- host->pdata->set_power(ios->power_mode, ios->vdd);
-
break;
}
+ if (host->pdata->set_power)
+ host->pdata->set_power(ios->power_mode, ios->vdd);
+
s3cmci_set_clk(host, ios);
/* Set CLOCK_ENABLE */
@@ -1317,13 +1303,6 @@ static const struct mmc_host_ops s3cmci_ops = {
.enable_sdio_irq = s3cmci_enable_sdio_irq,
};
-static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
- /* This is currently here to avoid a number of if (host->pdata)
- * checks. Any zero fields to ensure reasonable defaults are picked. */
- .no_wprotect = 1,
- .no_detect = 1,
-};
-
#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
static int s3cmci_cpufreq_transition(struct notifier_block *nb,
@@ -1477,24 +1456,21 @@ static int s3cmci_probe_pdata(struct s3cmci_host *host)
int i, ret;
host->is2440 = platform_get_device_id(pdev)->driver_data;
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "need platform data");
+ return -ENXIO;
+ }
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
- ret = gpio_request(i, dev_name(&pdev->dev));
- if (ret) {
+ for (i = 0; i < 6; i++) {
+ pdata->bus[i] = devm_gpiod_get_index(&pdev->dev, "bus", i,
+ GPIOD_OUT_LOW);
+ if (IS_ERR(pdata->bus[i])) {
dev_err(&pdev->dev, "failed to get gpio %d\n", i);
-
- for (i--; i >= S3C2410_GPE(5); i--)
- gpio_free(i);
-
- return ret;
+ return PTR_ERR(pdata->bus[i]);
}
}
- if (!pdev->dev.platform_data)
- pdev->dev.platform_data = &s3cmci_def_pdata;
-
- pdata = pdev->dev.platform_data;
-
if (pdata->no_wprotect)
mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
@@ -1549,7 +1525,6 @@ static int s3cmci_probe(struct platform_device *pdev)
struct s3cmci_host *host;
struct mmc_host *mmc;
int ret;
- int i;
mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
if (!mmc) {
@@ -1593,7 +1568,7 @@ static int s3cmci_probe(struct platform_device *pdev)
"failed to get io memory region resource.\n");
ret = -ENOENT;
- goto probe_free_gpio;
+ goto probe_free_host;
}
host->mem = request_mem_region(host->mem->start,
@@ -1602,7 +1577,7 @@ static int s3cmci_probe(struct platform_device *pdev)
if (!host->mem) {
dev_err(&pdev->dev, "failed to request io memory region.\n");
ret = -ENOENT;
- goto probe_free_gpio;
+ goto probe_free_host;
}
host->base = ioremap(host->mem->start, resource_size(host->mem));
@@ -1726,11 +1701,6 @@ static int s3cmci_probe(struct platform_device *pdev)
probe_free_mem_region:
release_mem_region(host->mem->start, resource_size(host->mem));
- probe_free_gpio:
- if (!pdev->dev.of_node)
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
- gpio_free(i);
-
probe_free_host:
mmc_free_host(mmc);
@@ -1756,7 +1726,6 @@ static int s3cmci_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct s3cmci_host *host = mmc_priv(mmc);
- int i;
s3cmci_shutdown(pdev);
@@ -1769,10 +1738,6 @@ static int s3cmci_remove(struct platform_device *pdev)
free_irq(host->irq, host);
- if (!pdev->dev.of_node)
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
- gpio_free(i);
-
iounmap(host->base);
release_mem_region(host->mem->start, resource_size(host->mem));
diff --git a/include/linux/platform_data/mmc-s3cmci.h
b/include/linux/platform_data/mmc-s3cmci.h
index 33310b11cbdd..bacb86db3112 100644
--- a/include/linux/platform_data/mmc-s3cmci.h
+++ b/include/linux/platform_data/mmc-s3cmci.h
@@ -35,6 +35,7 @@ struct s3c24xx_mci_pdata {
unsigned long ocr_avail;
void (*set_power)(unsigned char power_mode,
unsigned short vdd);
+ struct gpio_desc *bus[6];
};
/**
@@ -44,6 +45,7 @@ struct s3c24xx_mci_pdata {
* Copy the platform data supplied by @pdata so that this can be marked
* __initdata.
*/
+extern void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short
vdd);
extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
#endif /* _ARCH_NCI_H */
--
2.20.0
