On Tue, 24 Sep 2019 07:46:21 +0000
<tudor.amba...@microchip.com> wrote:
> From: Tudor Ambarus <tudor.amba...@microchip.com>
>
> In case the write of the first byte failed, retlen was incorrectly
> incremented to *retlen += actual; on the exit path. retlen should be
> incremented when actual data was written to the flash.
>
> Rename 'sst_write_err' label to 'out' as it is no longer generic for
> all the write errors in the sst_write() method, and may introduce
> confusion.
Renaming the label is indeed a good thing, but should be done in a
separate patch.
>
> Signed-off-by: Tudor Ambarus <tudor.amba...@microchip.com>
> ---
> drivers/mtd/spi-nor/spi-nor.c | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 0aee068a5835..be5dee622d51 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -2665,12 +2665,12 @@ static int sst_write(struct mtd_info *mtd, loff_t to,
> size_t len,
> /* write one byte. */
> ret = spi_nor_write_data(nor, to, 1, buf);
> if (ret < 0)
> - goto sst_write_err;
> + goto unlock_and_unprep;
> WARN(ret != 1, "While writing 1 byte written %i bytes\n",
> (int)ret);
> ret = spi_nor_wait_till_ready(nor);
> if (ret)
> - goto sst_write_err;
> + goto unlock_and_unprep;
> }
> to += actual;
Not sure we need this new label, we can just have:
actual = 0;
/* Start write from odd address. */
if (to % 2) {
nor->program_opcode = SPINOR_OP_BP;
/* write one byte. */
ret = spi_nor_write_data(nor, to, 1, buf);
if (ret < 0)
goto out;
WARN(ret != 1, "While writing 1 byte written %i
bytes\n", (int)ret);
ret = spi_nor_wait_till_ready(nor);
if (ret)
goto out;
to++;
actual++;
}
>
> @@ -2681,12 +2681,12 @@ static int sst_write(struct mtd_info *mtd, loff_t to,
> size_t len,
> /* write two bytes. */
> ret = spi_nor_write_data(nor, to, 2, buf + actual);
> if (ret < 0)
> - goto sst_write_err;
> + goto out;
> WARN(ret != 2, "While writing 2 bytes written %i bytes\n",
> (int)ret);
> ret = spi_nor_wait_till_ready(nor);
> if (ret)
> - goto sst_write_err;
> + goto out;
> to += 2;
> nor->sst_write_second = true;
> }
> @@ -2694,35 +2694,35 @@ static int sst_write(struct mtd_info *mtd, loff_t to,
> size_t len,
>
> ret = spi_nor_write_disable(nor);
> if (ret)
> - goto sst_write_err;
> + goto out;
>
> ret = spi_nor_wait_till_ready(nor);
> if (ret)
> - goto sst_write_err;
> + goto out;
>
> /* Write out trailing byte if it exists. */
> if (actual != len) {
> ret = spi_nor_write_enable(nor);
> if (ret)
> - goto sst_write_err;
> + goto out;
>
> nor->program_opcode = SPINOR_OP_BP;
> ret = spi_nor_write_data(nor, to, 1, buf + actual);
> if (ret < 0)
> - goto sst_write_err;
> + goto out;
> WARN(ret != 1, "While writing 1 byte written %i bytes\n",
> (int)ret);
> ret = spi_nor_wait_till_ready(nor);
> if (ret)
> - goto sst_write_err;
> + goto out;
>
> ret = spi_nor_write_disable(nor);
> if (ret)
> - goto sst_write_err;
> + goto out;
>
> actual += 1;
> }
> -sst_write_err:
> +out:
> *retlen += actual;
> unlock_and_unprep:
> spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
