On 10/4/19 6:29 PM, Benoit Parrot wrote:
> For each queue we need to maintain resolutions, pixel format,
> bytesperline, sizeimage, colorspace, etc.
>
> Instead of manually adding more entries in the vpe_q_data struct, it is
> better to just add a "struct v4l2_format" member and use that to store
> all needed information.
>
> Signed-off-by: Benoit Parrot <bpar...@ti.com>
> ---
> drivers/media/platform/ti-vpe/vpe.c | 185 ++++++++++++++--------------
> 1 file changed, 91 insertions(+), 94 deletions(-)
>
> diff --git a/drivers/media/platform/ti-vpe/vpe.c
> b/drivers/media/platform/ti-vpe/vpe.c
> index d7f8eb901475..5b1e9908fff2 100644
> --- a/drivers/media/platform/ti-vpe/vpe.c
> +++ b/drivers/media/platform/ti-vpe/vpe.c
> @@ -319,14 +319,9 @@ static struct vpe_fmt vpe_formats[] = {
> * there is one source queue and one destination queue for each m2m context.
> */
> struct vpe_q_data {
> - unsigned int width; /* frame width
> */
> - unsigned int height; /* frame height
> */
> - unsigned int nplanes; /* Current
> number of planes */
> - unsigned int bytesperline[VPE_MAX_PLANES]; /* bytes per
> line in memory */
> - enum v4l2_colorspace colorspace;
> - enum v4l2_field field; /* supported
> field value */
> + /* current v4l2 format info */
> + struct v4l2_format format;
Wouldn't it make more sense to use struct v4l2_pix_format_mplane? That avoid
having to
use the '.fmt.pix_mp' sequence every time you need to access it.
Regards,
Hans
> unsigned int flags;
> - unsigned int sizeimage[VPE_MAX_PLANES]; /* image size
> in memory */
> struct v4l2_rect c_rect; /* crop/compose
> rectangle */
> struct vpe_fmt *fmt; /* format info
> */
> };
> @@ -761,7 +756,8 @@ static void set_src_registers(struct vpe_ctx *ctx)
> static void set_dst_registers(struct vpe_ctx *ctx)
> {
> struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
> - enum v4l2_colorspace clrspc = ctx->q_data[Q_DATA_DST].colorspace;
> + enum v4l2_colorspace clrspc =
> + ctx->q_data[Q_DATA_DST].format.fmt.pix_mp.colorspace;
> struct vpe_fmt *fmt = ctx->q_data[Q_DATA_DST].fmt;
> u32 val = 0;
>
> @@ -868,11 +864,15 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
> unsigned int src_h = s_q_data->c_rect.height;
> unsigned int dst_w = d_q_data->c_rect.width;
> unsigned int dst_h = d_q_data->c_rect.height;
> + struct v4l2_pix_format_mplane *spix;
> + struct v4l2_pix_format_mplane *dpix;
> size_t mv_buf_size;
> int ret;
>
> ctx->sequence = 0;
> ctx->field = V4L2_FIELD_TOP;
> + spix = &s_q_data->format.fmt.pix_mp;
> + dpix = &d_q_data->format.fmt.pix_mp;
>
> if ((s_q_data->flags & Q_IS_INTERLACED) &&
> !(d_q_data->flags & Q_IS_INTERLACED)) {
> @@ -887,9 +887,9 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
> * extra space will not be used by the de-interlacer, but will
> * ensure that vpdma operates correctly
> */
> - bytes_per_line = ALIGN((s_q_data->width * mv->depth) >> 3,
> - VPDMA_STRIDE_ALIGN);
> - mv_buf_size = bytes_per_line * s_q_data->height;
> + bytes_per_line = ALIGN((spix->width * mv->depth) >> 3,
> + VPDMA_STRIDE_ALIGN);
> + mv_buf_size = bytes_per_line * spix->height;
>
> ctx->deinterlacing = true;
> src_h <<= 1;
> @@ -909,7 +909,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
> set_dei_regs(ctx);
>
> csc_set_coeff(ctx->dev->csc, &mmr_adb->csc_regs[0],
> - s_q_data->colorspace, d_q_data->colorspace);
> + spix->colorspace, dpix->colorspace);
>
> sc_set_hs_coeffs(ctx->dev->sc, ctx->sc_coeff_h.addr, src_w, dst_w);
> sc_set_vs_coeffs(ctx->dev->sc, ctx->sc_coeff_v.addr, src_h, dst_h);
> @@ -1023,6 +1023,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
> struct vpe_fmt *fmt = q_data->fmt;
> const struct vpdma_data_format *vpdma_fmt;
> int mv_buf_selector = !ctx->src_mv_buf_selector;
> + struct v4l2_pix_format_mplane *pix;
> dma_addr_t dma_addr;
> u32 flags = 0;
> u32 offset = 0;
> @@ -1032,21 +1033,23 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
> vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
> dma_addr = ctx->mv_buf_dma[mv_buf_selector];
> q_data = &ctx->q_data[Q_DATA_SRC];
> - stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
> + pix = &q_data->format.fmt.pix_mp;
> + stride = ALIGN((pix->width * vpdma_fmt->depth) >> 3,
> VPDMA_STRIDE_ALIGN);
> } else {
> /* to incorporate interleaved formats */
> int plane = fmt->coplanar ? p_data->vb_part : 0;
>
> + pix = &q_data->format.fmt.pix_mp;
> vpdma_fmt = fmt->vpdma_fmt[plane];
> /*
> * If we are using a single plane buffer and
> * we need to set a separate vpdma chroma channel.
> */
> - if (q_data->nplanes == 1 && plane) {
> + if (pix->num_planes == 1 && plane) {
> dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
> /* Compute required offset */
> - offset = q_data->bytesperline[0] * q_data->height;
> + offset = pix->plane_fmt[0].bytesperline * pix->height;
> } else {
> dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane);
> /* Use address as is, no offset */
> @@ -1060,7 +1063,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
> }
> /* Apply the offset */
> dma_addr += offset;
> - stride = q_data->bytesperline[VPE_LUMA];
> + stride = pix->plane_fmt[VPE_LUMA].bytesperline;
> }
>
> if (q_data->flags & Q_DATA_FRAME_1D)
> @@ -1071,7 +1074,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
> vpdma_set_max_size(ctx->dev->vpdma, VPDMA_MAX_SIZE1,
> MAX_W, MAX_H);
>
> - vpdma_add_out_dtd(&ctx->desc_list, q_data->width,
> + vpdma_add_out_dtd(&ctx->desc_list, pix->width,
> stride, &q_data->c_rect,
> vpdma_fmt, dma_addr, MAX_OUT_WIDTH_REG1,
> MAX_OUT_HEIGHT_REG1, p_data->channel, flags);
> @@ -1084,6 +1087,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
> struct vb2_buffer *vb = &ctx->src_vbs[p_data->vb_index]->vb2_buf;
> struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> struct vpe_fmt *fmt = q_data->fmt;
> + struct v4l2_pix_format_mplane *pix;
> const struct vpdma_data_format *vpdma_fmt;
> int mv_buf_selector = ctx->src_mv_buf_selector;
> int field = vbuf->field == V4L2_FIELD_BOTTOM;
> @@ -1093,10 +1097,11 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
> u32 offset = 0;
> u32 stride;
>
> + pix = &q_data->format.fmt.pix_mp;
> if (port == VPE_PORT_MV_IN) {
> vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
> dma_addr = ctx->mv_buf_dma[mv_buf_selector];
> - stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
> + stride = ALIGN((pix->width * vpdma_fmt->depth) >> 3,
> VPDMA_STRIDE_ALIGN);
> } else {
> /* to incorporate interleaved formats */
> @@ -1107,10 +1112,10 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
> * If we are using a single plane buffer and
> * we need to set a separate vpdma chroma channel.
> */
> - if (q_data->nplanes == 1 && plane) {
> + if (pix->num_planes == 1 && plane) {
> dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
> /* Compute required offset */
> - offset = q_data->bytesperline[0] * q_data->height;
> + offset = pix->plane_fmt[0].bytesperline * pix->height;
> } else {
> dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane);
> /* Use address as is, no offset */
> @@ -1124,7 +1129,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
> }
> /* Apply the offset */
> dma_addr += offset;
> - stride = q_data->bytesperline[VPE_LUMA];
> + stride = pix->plane_fmt[VPE_LUMA].bytesperline;
>
> /*
> * field used in VPDMA desc = 0 (top) / 1 (bottom)
> @@ -1144,7 +1149,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
> field = (field + p_data->vb_index + ctx->sequence) % 2;
>
> if (field) {
> - int height = q_data->height / 2;
> + int height = pix->height / 2;
> int bpp;
>
> if (fmt->fourcc == V4L2_PIX_FMT_NV12 ||
> @@ -1156,7 +1161,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
> if (plane)
> height /= 2;
>
> - dma_addr += q_data->width * height * bpp;
> + dma_addr += pix->width * height * bpp;
> }
> }
> }
> @@ -1173,7 +1178,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
> fmt->fourcc == V4L2_PIX_FMT_NV21))
> frame_height /= 2;
>
> - vpdma_add_in_dtd(&ctx->desc_list, q_data->width, stride,
> + vpdma_add_in_dtd(&ctx->desc_list, pix->width, stride,
> &q_data->c_rect, vpdma_fmt, dma_addr,
> p_data->channel, field, flags, frame_width,
> frame_height, 0, 0);
> @@ -1282,7 +1287,7 @@ static void device_run(void *priv)
> if (ctx->deinterlacing)
> add_out_dtd(ctx, VPE_PORT_MV_OUT);
>
> - if (d_q_data->colorspace == V4L2_COLORSPACE_SRGB) {
> + if (d_q_data->format.fmt.pix_mp.colorspace == V4L2_COLORSPACE_SRGB) {
> add_out_dtd(ctx, VPE_PORT_RGB_OUT);
> } else {
> add_out_dtd(ctx, VPE_PORT_LUMA_OUT);
> @@ -1324,7 +1329,7 @@ static void device_run(void *priv)
> }
>
> /* sync on channel control descriptors for output ports */
> - if (d_q_data->colorspace == V4L2_COLORSPACE_SRGB) {
> + if (d_q_data->format.fmt.pix_mp.colorspace == V4L2_COLORSPACE_SRGB) {
> vpdma_add_sync_on_channel_ctd(&ctx->desc_list,
> VPE_CHAN_RGB_OUT);
> } else {
> @@ -1559,7 +1564,6 @@ static int vpe_g_fmt(struct file *file, void *priv,
> struct v4l2_format *f)
> struct vpe_ctx *ctx = file->private_data;
> struct vb2_queue *vq;
> struct vpe_q_data *q_data;
> - int i;
>
> vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> if (!vq)
> @@ -1569,27 +1573,15 @@ static int vpe_g_fmt(struct file *file, void *priv,
> struct v4l2_format *f)
> if (!q_data)
> return -EINVAL;
>
> - pix->width = q_data->width;
> - pix->height = q_data->height;
> - pix->pixelformat = q_data->fmt->fourcc;
> - pix->field = q_data->field;
> + *f = q_data->format;
>
> - if (V4L2_TYPE_IS_OUTPUT(f->type)) {
> - pix->colorspace = q_data->colorspace;
> - } else {
> + if (!V4L2_TYPE_IS_OUTPUT(f->type)) {
> struct vpe_q_data *s_q_data;
>
> /* get colorspace from the source queue */
> s_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
>
> - pix->colorspace = s_q_data->colorspace;
> - }
> -
> - pix->num_planes = q_data->nplanes;
> -
> - for (i = 0; i < pix->num_planes; i++) {
> - pix->plane_fmt[i].bytesperline = q_data->bytesperline[i];
> - pix->plane_fmt[i].sizeimage = q_data->sizeimage[i];
> + pix->colorspace = s_q_data->format.fmt.pix_mp.colorspace;
> }
>
> return 0;
> @@ -1736,10 +1728,8 @@ static int vpe_try_fmt(struct file *file, void *priv,
> struct v4l2_format *f)
> static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f)
> {
> struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
> - struct v4l2_plane_pix_format *plane_fmt;
> struct vpe_q_data *q_data;
> struct vb2_queue *vq;
> - int i;
>
> vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> if (!vq)
> @@ -1755,29 +1745,18 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct
> v4l2_format *f)
> return -EINVAL;
>
> q_data->fmt = find_format(f);
> - q_data->width = pix->width;
> - q_data->height = pix->height;
> - q_data->colorspace = pix->colorspace;
> - q_data->field = pix->field;
> - q_data->nplanes = pix->num_planes;
> -
> - for (i = 0; i < pix->num_planes; i++) {
> - plane_fmt = &pix->plane_fmt[i];
> -
> - q_data->bytesperline[i] = plane_fmt->bytesperline;
> - q_data->sizeimage[i] = plane_fmt->sizeimage;
> - }
> + q_data->format = *f;
>
> q_data->c_rect.left = 0;
> q_data->c_rect.top = 0;
> - q_data->c_rect.width = q_data->width;
> - q_data->c_rect.height = q_data->height;
> + q_data->c_rect.width = pix->width;
> + q_data->c_rect.height = pix->height;
>
> - if (q_data->field == V4L2_FIELD_ALTERNATE)
> + if (q_data->format.fmt.pix_mp.field == V4L2_FIELD_ALTERNATE)
> q_data->flags |= Q_DATA_INTERLACED_ALTERNATE;
> - else if (q_data->field == V4L2_FIELD_SEQ_TB)
> + else if (q_data->format.fmt.pix_mp.field == V4L2_FIELD_SEQ_TB)
> q_data->flags |= Q_DATA_INTERLACED_SEQ_TB;
> - else if (q_data->field == V4L2_FIELD_SEQ_BT)
> + else if (q_data->format.fmt.pix_mp.field == V4L2_FIELD_SEQ_BT)
> q_data->flags |= Q_DATA_INTERLACED_SEQ_BT;
> else
> q_data->flags &= ~Q_IS_INTERLACED;
> @@ -1787,11 +1766,11 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct
> v4l2_format *f)
> q_data->c_rect.height /= 2;
>
> vpe_dbg(ctx->dev, "Setting format for type %d, wxh: %dx%d, fmt: %d
> bpl_y %d",
> - f->type, q_data->width, q_data->height, q_data->fmt->fourcc,
> - q_data->bytesperline[VPE_LUMA]);
> - if (q_data->nplanes == 2)
> + f->type, pix->width, pix->height, pix->pixelformat,
> + pix->plane_fmt[0].bytesperline);
> + if (pix->num_planes == 2)
> vpe_dbg(ctx->dev, " bpl_uv %d\n",
> - q_data->bytesperline[VPE_CHROMA]);
> + pix->plane_fmt[1].bytesperline);
>
> return 0;
> }
> @@ -1820,6 +1799,7 @@ static int vpe_s_fmt(struct file *file, void *priv,
> struct v4l2_format *f)
> static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
> {
> struct vpe_q_data *q_data;
> + struct v4l2_pix_format_mplane *pix;
> int height;
>
> if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
> @@ -1830,6 +1810,8 @@ static int __vpe_try_selection(struct vpe_ctx *ctx,
> struct v4l2_selection *s)
> if (!q_data)
> return -EINVAL;
>
> + pix = &q_data->format.fmt.pix_mp;
> +
> switch (s->target) {
> case V4L2_SEL_TGT_COMPOSE:
> /*
> @@ -1860,23 +1842,23 @@ static int __vpe_try_selection(struct vpe_ctx *ctx,
> struct v4l2_selection *s)
> * the field height, not the buffer height
> */
> if (q_data->flags & Q_IS_SEQ_XX)
> - height = q_data->height / 2;
> + height = pix->height / 2;
> else
> - height = q_data->height;
> + height = pix->height;
>
> if (s->r.top < 0 || s->r.left < 0) {
> vpe_err(ctx->dev, "negative values for top and left\n");
> s->r.top = s->r.left = 0;
> }
>
> - v4l_bound_align_image(&s->r.width, MIN_W, q_data->width, 1,
> + v4l_bound_align_image(&s->r.width, MIN_W, pix->width, 1,
> &s->r.height, MIN_H, height, H_ALIGN, S_ALIGN);
>
> /* adjust left/top if cropping rectangle is out of bounds */
> - if (s->r.left + s->r.width > q_data->width)
> - s->r.left = q_data->width - s->r.width;
> - if (s->r.top + s->r.height > q_data->height)
> - s->r.top = q_data->height - s->r.height;
> + if (s->r.left + s->r.width > pix->width)
> + s->r.left = pix->width - s->r.width;
> + if (s->r.top + s->r.height > pix->height)
> + s->r.top = pix->height - s->r.height;
>
> return 0;
> }
> @@ -1886,6 +1868,7 @@ static int vpe_g_selection(struct file *file, void *fh,
> {
> struct vpe_ctx *ctx = file->private_data;
> struct vpe_q_data *q_data;
> + struct v4l2_pix_format_mplane *pix;
> bool use_c_rect = false;
>
> if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
> @@ -1896,6 +1879,8 @@ static int vpe_g_selection(struct file *file, void *fh,
> if (!q_data)
> return -EINVAL;
>
> + pix = &q_data->format.fmt.pix_mp;
> +
> switch (s->target) {
> case V4L2_SEL_TGT_COMPOSE_DEFAULT:
> case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> @@ -1934,8 +1919,8 @@ static int vpe_g_selection(struct file *file, void *fh,
> */
> s->r.left = 0;
> s->r.top = 0;
> - s->r.width = q_data->width;
> - s->r.height = q_data->height;
> + s->r.width = pix->width;
> + s->r.height = pix->height;
> }
>
> return 0;
> @@ -2043,14 +2028,14 @@ static int vpe_queue_setup(struct vb2_queue *vq,
> if (!q_data)
> return -EINVAL;
>
> - *nplanes = q_data->nplanes;
> + *nplanes = q_data->format.fmt.pix_mp.num_planes;
>
> for (i = 0; i < *nplanes; i++)
> - sizes[i] = q_data->sizeimage[i];
> + sizes[i] = q_data->format.fmt.pix_mp.plane_fmt[i].sizeimage;
>
> vpe_dbg(ctx->dev, "get %d buffer(s) of size %d", *nbuffers,
> sizes[VPE_LUMA]);
> - if (q_data->nplanes == 2)
> + if (*nplanes == 2)
> vpe_dbg(ctx->dev, " and %d\n", sizes[VPE_CHROMA]);
>
> return 0;
> @@ -2061,14 +2046,16 @@ static int vpe_buf_prepare(struct vb2_buffer *vb)
> struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> struct vpe_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> struct vpe_q_data *q_data;
> - int i, num_planes;
> + struct v4l2_pix_format_mplane *pix;
> + int i;
>
> vpe_dbg(ctx->dev, "type: %d\n", vb->vb2_queue->type);
>
> q_data = get_q_data(ctx, vb->vb2_queue->type);
> if (!q_data)
> return -EINVAL;
> - num_planes = q_data->nplanes;
> +
> + pix = &q_data->format.fmt.pix_mp;
>
> if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> if (!(q_data->flags & Q_IS_INTERLACED)) {
> @@ -2082,18 +2069,18 @@ static int vpe_buf_prepare(struct vb2_buffer *vb)
> }
> }
>
> - for (i = 0; i < num_planes; i++) {
> - if (vb2_plane_size(vb, i) < q_data->sizeimage[i]) {
> + for (i = 0; i < pix->num_planes; i++) {
> + if (vb2_plane_size(vb, i) < pix->plane_fmt[i].sizeimage) {
> vpe_err(ctx->dev,
> "data will not fit into plane (%lu < %lu)\n",
> vb2_plane_size(vb, i),
> - (long) q_data->sizeimage[i]);
> + (long) pix->plane_fmt[i].sizeimage);
> return -EINVAL;
> }
> }
>
> - for (i = 0; i < num_planes; i++)
> - vb2_set_plane_payload(vb, i, q_data->sizeimage[i]);
> + for (i = 0; i < pix->num_planes; i++)
> + vb2_set_plane_payload(vb, i, pix->plane_fmt[i].sizeimage);
>
> return 0;
> }
> @@ -2278,6 +2265,7 @@ static int vpe_open(struct file *file)
> struct vpe_q_data *s_q_data;
> struct v4l2_ctrl_handler *hdl;
> struct vpe_ctx *ctx;
> + struct v4l2_pix_format_mplane *pix;
> int ret;
>
> vpe_dbg(dev, "vpe_open\n");
> @@ -2326,23 +2314,32 @@ static int vpe_open(struct file *file)
> v4l2_ctrl_handler_setup(hdl);
>
> s_q_data = &ctx->q_data[Q_DATA_SRC];
> + pix = &s_q_data->format.fmt.pix_mp;
> s_q_data->fmt = __find_format(V4L2_PIX_FMT_YUYV);
> - s_q_data->width = 1920;
> - s_q_data->height = 1080;
> - s_q_data->nplanes = 1;
> - s_q_data->bytesperline[VPE_LUMA] = (s_q_data->width *
> + pix->pixelformat = s_q_data->fmt->fourcc;
> + s_q_data->format.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
> + pix->width = 1920;
> + pix->height = 1080;
> + pix->num_planes = 1;
> + pix->plane_fmt[VPE_LUMA].bytesperline = (pix->width *
> s_q_data->fmt->vpdma_fmt[VPE_LUMA]->depth) >> 3;
> - s_q_data->sizeimage[VPE_LUMA] = (s_q_data->bytesperline[VPE_LUMA] *
> - s_q_data->height);
> - s_q_data->colorspace = V4L2_COLORSPACE_REC709;
> - s_q_data->field = V4L2_FIELD_NONE;
> + pix->plane_fmt[VPE_LUMA].sizeimage =
> + pix->plane_fmt[VPE_LUMA].bytesperline *
> + pix->height;
> + pix->colorspace = V4L2_COLORSPACE_REC709;
> + pix->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> + pix->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> + pix->quantization = V4L2_QUANTIZATION_DEFAULT;
> + pix->field = V4L2_FIELD_NONE;
> s_q_data->c_rect.left = 0;
> s_q_data->c_rect.top = 0;
> - s_q_data->c_rect.width = s_q_data->width;
> - s_q_data->c_rect.height = s_q_data->height;
> + s_q_data->c_rect.width = pix->width;
> + s_q_data->c_rect.height = pix->height;
> s_q_data->flags = 0;
>
> ctx->q_data[Q_DATA_DST] = *s_q_data;
> + ctx->q_data[Q_DATA_DST].format.type =
> + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
>
> set_dei_shadow_registers(ctx);
> set_src_registers(ctx);
>
