Hi Nícolas,
Thanks for you patch, just some small comments below.
On 10/6/19 4:14 PM, Nícolas F. R. A. Prado wrote:
> Instead of validating the links to capture devices and subdevices with
> the same function, use the default v4l function for links between
> subdevices and only use a different function for validating between
> capture device and subdevice.
> This change should also ease future work to associate multiple mbus
> codes for the same pixelformat in vimc_pix_map.
>
> These changes were tested with
> v4l2-compliance SHA: 3f806630e2ecbcebe31872b865c5c4b42f111a99, 64 bits
> and passed all tests:
> Grand Total for vimc device /dev/media0: 451, Succeeded: 451, Failed: 0,
> Warnings: 0
>
> Signed-off-by: Nícolas F. R. A. Prado <nfrapr...@protonmail.com>
> ---
> drivers/media/platform/vimc/vimc-capture.c | 78 +++++++++++++++-
> drivers/media/platform/vimc/vimc-common.c | 103 ++++-----------------
> drivers/media/platform/vimc/vimc-common.h | 3 +
> 3 files changed, 96 insertions(+), 88 deletions(-)
>
> diff --git a/drivers/media/platform/vimc/vimc-capture.c
> b/drivers/media/platform/vimc/vimc-capture.c
> index 602f80323031..924b99f82123 100644
> --- a/drivers/media/platform/vimc/vimc-capture.c
> +++ b/drivers/media/platform/vimc/vimc-capture.c
> @@ -321,8 +321,84 @@ static const struct vb2_ops vimc_cap_qops = {
> .wait_finish = vb2_ops_wait_finish,
> };
>
> +int vimc_cap_link_validate(struct media_link *link)
This function is only used inside the capture, it could be static.
Unless if you want to make it a generic function in vimc-common.h, so the future
output device could use it as well, but it can be done in the output patch.
> +{
> + struct v4l2_pix_format source_fmt, sink_fmt;
> + int ret;
> +
> + ret = vimc_get_pix_format(link->source, &source_fmt);
> + if (ret)
> + return ret;
> +
> + ret = vimc_get_pix_format(link->sink, &sink_fmt);
> + if (ret)
> + return ret;
> +
> + pr_info("vimc link validate: "
> + "%s:src:%dx%d (0x%x, %d, %d, %d, %d) "
> + "%s:snk:%dx%d (0x%x, %d, %d, %d, %d)\n",
> + /* src */
> + link->source->entity->name,
> + source_fmt.width, source_fmt.height,
> + source_fmt.pixelformat, source_fmt.colorspace,
> + source_fmt.quantization, source_fmt.xfer_func,
> + source_fmt.ycbcr_enc,
> + /* sink */
> + link->sink->entity->name,
> + sink_fmt.width, sink_fmt.height,
> + sink_fmt.pixelformat, sink_fmt.colorspace,
> + sink_fmt.quantization, sink_fmt.xfer_func,
> + sink_fmt.ycbcr_enc);
> +
> + /* The width, height and pixelformat must match. */
> + if (source_fmt.width != sink_fmt.width
> + || source_fmt.height != sink_fmt.height
> + || source_fmt.pixelformat != sink_fmt.pixelformat)
> + return -EPIPE;
> +
> + /*
> + * The field order must match, or the sink field order must be NONE
> + * to support interlaced hardware connected to bridges that support
> + * progressive formats only.
> + */
> + if (source_fmt.field != sink_fmt.field &&
> + sink_fmt.field != V4L2_FIELD_NONE)
> + return -EPIPE;
> +
> + /*
> + * If colorspace is DEFAULT, then assume all the colorimetry is also
> + * DEFAULT, return 0 to skip comparing the other colorimetry parameters
> + */
> + if (source_fmt.colorspace == V4L2_COLORSPACE_DEFAULT
> + || sink_fmt.colorspace == V4L2_COLORSPACE_DEFAULT)
> + return 0;
> +
> + /* Colorspace must match. */
> + if (source_fmt.colorspace != sink_fmt.colorspace)
> + return -EPIPE;
> +
> + /* Colorimetry must match if they are not set to DEFAULT */
> + if (source_fmt.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT
> + && sink_fmt.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT
> + && source_fmt.ycbcr_enc != sink_fmt.ycbcr_enc)
> + return -EPIPE;
> +
> + if (source_fmt.quantization != V4L2_QUANTIZATION_DEFAULT
> + && sink_fmt.quantization != V4L2_QUANTIZATION_DEFAULT
> + && source_fmt.quantization != sink_fmt.quantization)
> + return -EPIPE;
> +
> + if (source_fmt.xfer_func != V4L2_XFER_FUNC_DEFAULT
> + && sink_fmt.xfer_func != V4L2_XFER_FUNC_DEFAULT
> + && source_fmt.xfer_func != sink_fmt.xfer_func)
> + return -EPIPE;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(vimc_cap_link_validate);
No need to export it here.
> +
> static const struct media_entity_operations vimc_cap_mops = {
> - .link_validate = vimc_link_validate,
> + .link_validate = vimc_cap_link_validate,
> };
>
> static void vimc_cap_release(struct video_device *vdev)
> diff --git a/drivers/media/platform/vimc/vimc-common.c
> b/drivers/media/platform/vimc/vimc-common.c
> index a3120f4f7a90..fe91d67811e5 100644
> --- a/drivers/media/platform/vimc/vimc-common.c
> +++ b/drivers/media/platform/vimc/vimc-common.c
> @@ -247,35 +247,40 @@ int vimc_pipeline_s_stream(struct media_entity *ent,
> int enable)
> }
> EXPORT_SYMBOL_GPL(vimc_pipeline_s_stream);
>
> -static int vimc_get_mbus_format(struct media_pad *pad,
> - struct v4l2_subdev_format *fmt)
> +int vimc_get_pix_format(struct media_pad *pad,
> + struct v4l2_pix_format *fmt)
Could you align the arguments please?
> {
> if (is_media_entity_v4l2_subdev(pad->entity)) {
> struct v4l2_subdev *sd =
> media_entity_to_v4l2_subdev(pad->entity);
> + struct v4l2_subdev_format sd_fmt;
> + const struct vimc_pix_map *pix_map;
> int ret;
>
> - fmt->which = V4L2_SUBDEV_FORMAT_ACTIVE;
> - fmt->pad = pad->index;
> + sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> + sd_fmt.pad = pad->index;
> +
> + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &sd_fmt);
>
Please remove this blank line, so that the error check follows the function.
> - ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, fmt);
> if (ret)
> return ret;
>
> + v4l2_fill_pix_format(fmt, &sd_fmt.format);
> +
No need for this blank line.
> + pix_map = vimc_pix_map_by_code(sd_fmt.format.code);
> + fmt->pixelformat = pix_map->pixelformat;
> +
Could you also remove this blank like?
> } else if (is_media_entity_v4l2_video_device(pad->entity)) {
> struct video_device *vdev = container_of(pad->entity,
> struct video_device,
> entity);
> struct vimc_ent_device *ved = video_get_drvdata(vdev);
> - const struct vimc_pix_map *vpix;
> - struct v4l2_pix_format vdev_fmt;
>
> if (!ved->vdev_get_format)
> return -ENOIOCTLCMD;
>
> - ved->vdev_get_format(ved, &vdev_fmt);
> - vpix = vimc_pix_map_by_pixelformat(vdev_fmt.pixelformat);
> - v4l2_fill_mbus_format(&fmt->format, &vdev_fmt, vpix->code);
> + ved->vdev_get_format(ved, fmt);
> +
And this one too.
> } else {
> return -EINVAL;
> }
> @@ -283,84 +288,8 @@ static int vimc_get_mbus_format(struct media_pad *pad,
> return 0;
> }
>
> -int vimc_link_validate(struct media_link *link)
> -{
> - struct v4l2_subdev_format source_fmt, sink_fmt;
> - int ret;
> -
> - ret = vimc_get_mbus_format(link->source, &source_fmt);
> - if (ret)
> - return ret;
> -
> - ret = vimc_get_mbus_format(link->sink, &sink_fmt);
> - if (ret)
> - return ret;
> -
> - pr_info("vimc link validate: "
> - "%s:src:%dx%d (0x%x, %d, %d, %d, %d) "
> - "%s:snk:%dx%d (0x%x, %d, %d, %d, %d)\n",
> - /* src */
> - link->source->entity->name,
> - source_fmt.format.width, source_fmt.format.height,
> - source_fmt.format.code, source_fmt.format.colorspace,
> - source_fmt.format.quantization, source_fmt.format.xfer_func,
> - source_fmt.format.ycbcr_enc,
> - /* sink */
> - link->sink->entity->name,
> - sink_fmt.format.width, sink_fmt.format.height,
> - sink_fmt.format.code, sink_fmt.format.colorspace,
> - sink_fmt.format.quantization, sink_fmt.format.xfer_func,
> - sink_fmt.format.ycbcr_enc);
> -
> - /* The width, height and code must match. */
> - if (source_fmt.format.width != sink_fmt.format.width
> - || source_fmt.format.height != sink_fmt.format.height
> - || source_fmt.format.code != sink_fmt.format.code)
> - return -EPIPE;
> -
> - /*
> - * The field order must match, or the sink field order must be NONE
> - * to support interlaced hardware connected to bridges that support
> - * progressive formats only.
> - */
> - if (source_fmt.format.field != sink_fmt.format.field &&
> - sink_fmt.format.field != V4L2_FIELD_NONE)
> - return -EPIPE;
> -
> - /*
> - * If colorspace is DEFAULT, then assume all the colorimetry is also
> - * DEFAULT, return 0 to skip comparing the other colorimetry parameters
> - */
> - if (source_fmt.format.colorspace == V4L2_COLORSPACE_DEFAULT
> - || sink_fmt.format.colorspace == V4L2_COLORSPACE_DEFAULT)
> - return 0;
> -
> - /* Colorspace must match. */
> - if (source_fmt.format.colorspace != sink_fmt.format.colorspace)
> - return -EPIPE;
> -
> - /* Colorimetry must match if they are not set to DEFAULT */
> - if (source_fmt.format.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT
> - && sink_fmt.format.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT
> - && source_fmt.format.ycbcr_enc != sink_fmt.format.ycbcr_enc)
> - return -EPIPE;
> -
> - if (source_fmt.format.quantization != V4L2_QUANTIZATION_DEFAULT
> - && sink_fmt.format.quantization != V4L2_QUANTIZATION_DEFAULT
> - && source_fmt.format.quantization != sink_fmt.format.quantization)
> - return -EPIPE;
> -
> - if (source_fmt.format.xfer_func != V4L2_XFER_FUNC_DEFAULT
> - && sink_fmt.format.xfer_func != V4L2_XFER_FUNC_DEFAULT
> - && source_fmt.format.xfer_func != sink_fmt.format.xfer_func)
> - return -EPIPE;
> -
> - return 0;
> -}
> -EXPORT_SYMBOL_GPL(vimc_link_validate);
> -
> static const struct media_entity_operations vimc_ent_sd_mops = {
> - .link_validate = vimc_link_validate,
> + .link_validate = v4l2_subdev_link_validate,
> };
>
> int vimc_ent_sd_register(struct vimc_ent_device *ved,
> diff --git a/drivers/media/platform/vimc/vimc-common.h
> b/drivers/media/platform/vimc/vimc-common.h
> index 698db7c07645..8a4310430292 100644
> --- a/drivers/media/platform/vimc/vimc-common.h
> +++ b/drivers/media/platform/vimc/vimc-common.h
> @@ -263,6 +263,9 @@ int vimc_ent_sd_register(struct vimc_ent_device *ved,
> void vimc_ent_sd_unregister(struct vimc_ent_device *ved,
> struct v4l2_subdev *sd);
>
> +
> +int vimc_get_pix_format(struct media_pad *pad, struct v4l2_pix_format *fmt);
> +
You don't need this if you make the function static.
> /**
> * vimc_link_validate - validates a media link
> *
>
Thanks!
Helen
