From: Adam Ford <aford...@gmail.com>
commit f9f5518a38684e031d913f40482721ff553f5ba2 upstream.
A previous commit removed the panel-dpi driver, which made the
Torpedo video stop working because it relied on the dpi driver
for setting video timings. Now that the simple-panel driver is
available in omap2plus, this patch migrates the Torpedo dev kits
to use a similar panel and remove the manual timing requirements.
Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")
Signed-off-by: Adam Ford <aford...@gmail.com>
Signed-off-by: Tony Lindgren <t...@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 37 +++--------------------
1 file changed, 6 insertions(+), 31 deletions(-)
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -108,7 +108,6 @@
&dss {
status = "ok";
vdds_dsi-supply = <&vpll2>;
- vdda_video-supply = <&video_reg>;
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins1>;
port {
@@ -124,44 +123,20 @@
display0 = &lcd0;
};
- video_reg: video_reg {
- pinctrl-names = "default";
- pinctrl-0 = <&panel_pwr_pins>;
- compatible = "regulator-fixed";
- regulator-name = "fixed-supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
- };
-
lcd0: display {
- compatible = "panel-dpi";
+ /* This isn't the exact LCD, but the timings meet spec */
+ /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
+ compatible = "newhaven,nhd-4.3-480272ef-atxl";
label = "15";
- status = "okay";
- /* default-on; */
pinctrl-names = "default";
-
+ pinctrl-0 = <&panel_pwr_pins>;
+ backlight = <&bl>;
+ enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
-
- panel-timing {
- clock-frequency = <9000000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <3>;
- hback-porch = <2>;
- hsync-len = <42>;
- vback-porch = <3>;
- vfront-porch = <4>;
- vsync-len = <11>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
};
bl: backlight {
