On 18-08-19, 00:17, jassisinghb...@gmail.com wrote:
> From: Jassi Brar <jaswinder.si...@linaro.org>
>
> Document the devicetree bindings for Socionext Milbeaut HDMAC
> controller. Controller has upto 8 floating channels, that need
> a predefined slave-id to work from a set of slaves.
>
> Signed-off-by: Jassi Brar <jaswinder.si...@linaro.org>
> ---
> .../bindings/dma/milbeaut-m10v-hdmac.txt | 32 +++++++++++++++++++
> 1 file changed, 32 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
>
> diff --git a/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
> b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
> new file mode 100644
> index 000000000000..f0960724f1c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
> @@ -0,0 +1,32 @@
> +* Milbeaut AHB DMA Controller
> +
> +Milbeaut AHB DMA controller has transfer capability bellow.
s/bellow/below:
> + - device to memory transfer
> + - memory to device transfer
> +
> +Required property:
> +- compatible: Should be "socionext,milbeaut-m10v-hdmac"
> +- reg: Should contain DMA registers location and length.
> +- interrupts: Should contain all of the per-channel DMA interrupts.
> + Number of channels is configurable - 2, 4 or 8, so
> + the number of interrupts specfied should be {2,4,8}.
s/specfied/specified
--
~Vinod
