From: Tudor Ambarus <tudor.amba...@microchip.com>
Parsing of flash parameters were interleaved with setting of the
nor addr width. Dedicate a function for setting nor addr width.
Signed-off-by: Tudor Ambarus <tudor.amba...@microchip.com>
Reviewed-by: Boris Brezillon <boris.brezil...@collabora.com>
---
v3: no changes
drivers/mtd/spi-nor/spi-nor.c | 50 ++++++++++++++++++++++++++-----------------
1 file changed, 30 insertions(+), 20 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index dcda96a20f6c..d13317d1f372 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -4739,6 +4739,33 @@ static const struct flash_info *spi_nor_match_id(const
char *name)
return NULL;
}
+static int spi_nor_set_addr_width(struct spi_nor *nor)
+{
+ if (nor->addr_width) {
+ /* already configured from SFDP */
+ } else if (nor->info->addr_width) {
+ nor->addr_width = nor->info->addr_width;
+ } else if (nor->mtd.size > 0x1000000) {
+ /* enable 4-byte addressing if the device exceeds 16MiB */
+ nor->addr_width = 4;
+ } else {
+ nor->addr_width = 3;
+ }
+
+ if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
+ dev_err(nor->dev, "address width is too large: %u\n",
+ nor->addr_width);
+ return -EINVAL;
+ }
+
+ /* Set 4byte opcodes when possible. */
+ if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
+ !(nor->flags & SNOR_F_HAS_4BAIT))
+ spi_nor_set_4byte_opcodes(nor);
+
+ return 0;
+}
+
int spi_nor_scan(struct spi_nor *nor, const char *name,
const struct spi_nor_hwcaps *hwcaps)
{
@@ -4885,29 +4912,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (ret)
return ret;
- if (nor->addr_width) {
- /* already configured from SFDP */
- } else if (info->addr_width) {
- nor->addr_width = info->addr_width;
- } else if (mtd->size > 0x1000000) {
- /* enable 4-byte addressing if the device exceeds 16MiB */
- nor->addr_width = 4;
- } else {
- nor->addr_width = 3;
- }
-
if (info->flags & SPI_NOR_4B_OPCODES)
nor->flags |= SNOR_F_4B_OPCODES;
- if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
- !(nor->flags & SNOR_F_HAS_4BAIT))
- spi_nor_set_4byte_opcodes(nor);
-
- if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
- dev_err(dev, "address width is too large: %u\n",
- nor->addr_width);
- return -EINVAL;
- }
+ ret = spi_nor_set_addr_width(nor);
+ if (ret)
+ return ret;
/* Send all the required SPI flash commands to initialize device */
ret = spi_nor_init(nor);
--
2.9.5
