Hi Jerome,
thank you for the patch. Just one nitpick and one real issue below:
On Tue, 2019-08-20 at 11:46 +0200, Jerome Brunet wrote:
> Add the new arb reset lines of the SM1 SoC family
>
> Signed-off-by: Jerome Brunet <jbru...@baylibre.com>
> ---
> drivers/reset/reset-meson-audio-arb.c | 28 ++++++++++++++++++++++++---
> 1 file changed, 25 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/reset/reset-meson-audio-arb.c
> b/drivers/reset/reset-meson-audio-arb.c
> index c53a2185a039..72d29dbca45a 100644
> --- a/drivers/reset/reset-meson-audio-arb.c
> +++ b/drivers/reset/reset-meson-audio-arb.c
> @@ -30,6 +30,17 @@ static const unsigned int axg_audio_arb_reset_bits[] = {
> [AXG_ARB_FRDDR_C] = 6,
> };
>
> +static const unsigned int sm1_audio_arb_reset_bits[] = {
> + [AXG_ARB_TODDR_A] = 0,
> + [AXG_ARB_TODDR_B] = 1,
> + [AXG_ARB_TODDR_C] = 2,
> + [AXG_ARB_FRDDR_A] = 4,
> + [AXG_ARB_FRDDR_B] = 5,
> + [AXG_ARB_FRDDR_C] = 6,
> + [AXG_ARB_TODDR_D] = 3,
> + [AXG_ARB_FRDDR_D] = 7,
> +};
> +
> static int meson_audio_arb_update(struct reset_controller_dev *rcdev,
> unsigned long id, bool assert)
> {
> @@ -82,8 +93,14 @@ static const struct reset_control_ops
> meson_audio_arb_rstc_ops = {
> };
>
> static const struct of_device_id meson_audio_arb_of_match[] = {
> - { .compatible = "amlogic,meson-axg-audio-arb", },
> - {}
> + {
> + .compatible = "amlogic,meson-axg-audio-arb",
> + .data = axg_audio_arb_reset_bits,
> + },
> + {
> + .compatible = "amlogic,meson-sm1-audio-arb",
> + .data = sm1_audio_arb_reset_bits
> + }, {}
Only slight preference, I would keep the sentinel on a separate line.
Your choice.
> };
> MODULE_DEVICE_TABLE(of, meson_audio_arb_of_match);
>
> @@ -104,10 +121,15 @@ static int meson_audio_arb_remove(struct
> platform_device *pdev)
> static int meson_audio_arb_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> + const unsigned int *data;
> struct meson_audio_arb_data *arb;
> struct resource *res;
> int ret;
>
> + data = of_device_get_match_data(dev);
> + if (!data)
> + return -EINVAL;
> +
> arb = devm_kzalloc(dev, sizeof(*arb), GFP_KERNEL);
> if (!arb)
> return -ENOMEM;
> @@ -126,7 +148,7 @@ static int meson_audio_arb_probe(struct platform_device
> *pdev)
> return PTR_ERR(arb->regs);
>
> spin_lock_init(&arb->lock);
> - arb->reset_bits = axg_audio_arb_reset_bits;
> + arb->reset_bits = data;
> arb->rstc.nr_resets = ARRAY_SIZE(axg_audio_arb_reset_bits);
Since SM1 has two more resets, this needs to come from device match data
as well, or the last two resets will be unusable.
> arb->rstc.ops = &meson_audio_arb_rstc_ops;
> arb->rstc.of_node = dev->of_node;
regards
Philipp
