On Mon, Aug 12, 2019 at 02:23:40PM +0300, Alexandru Ardelean wrote:
> Both ADIN1200 & ADIN1300 support Clause 45 access for some registers.
> The Extended Management Interface (EMI) registers are accessible via both
> Clause 45 (at register MDIO_MMD_VEND1) and using Clause 22.
>
> The Clause 22 access for MMD regs differs from the standard one defined by
> 802.3. The ADIN PHYs use registers ExtRegPtr (0x0010) and ExtRegData
> (0x0011) to access Clause 45 & EMI registers.
>
> The indirect access is done via the following mechanism (for both R/W):
> 1. Write the address of the register in the ExtRegPtr
> 2. Read/write the value of the register via reg ExtRegData
>
> This mechanism is needed to manage configuration of chip settings and to
> access EEE registers via Clause 22.
>
> Since Clause 45 access will likely never be used, it is not implemented via
> this hook.
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardel...@analog.com>
Reviewed-by: Andrew Lunn <and...@lunn.ch>
Andrew
