Hi Philippe
On Wed, 2019-08-07 at 08:26 +0000, Philippe Schenker wrote:
> In order for the otg ports, that these modules support, it is needed
> that dr_mode is on otg. Switch to use that feature.
Isn't further extcon integration required for this to truly work?
> Signed-off-by: Philippe Schenker <philippe.schen...@toradex.com>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> arch/arm/boot/dts/imx6qdl-colibri.dtsi | 2 +-
> arch/arm/boot/dts/imx7-colibri.dtsi | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> index 9a63debab0b5..6674198346d2 100644
> --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> @@ -388,7 +388,7 @@
> &usbotg {
> pinctrl-names = "default";
> disable-over-current;
> - dr_mode = "peripheral";
> + dr_mode = "otg";
> status = "disabled";
> };
>
> diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi
> b/arch/arm/boot/dts/imx7-colibri.dtsi
> index 67f5e0c87fdc..42478f1aa146 100644
> --- a/arch/arm/boot/dts/imx7-colibri.dtsi
> +++ b/arch/arm/boot/dts/imx7-colibri.dtsi
> @@ -320,7 +320,7 @@
> };
>
> &usbotg1 {
> - dr_mode = "host";
> + dr_mode = "otg";
> };
>
> &usdhc1 {
Cheers
Marcel
