Added device tree binding documentation for
Nuvoton NPCM7xx Ethernet MAC Controller (EMC) 10/100 RMII
Signed-off-by: Avi Fishman <avifishma...@gmail.com>
---
.../bindings/net/nuvoton,npcm7xx-emc.txt | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644
Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
diff --git a/Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
b/Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
new file mode 100644
index 000000000000..a7ac3ca66de9
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
@@ -0,0 +1,38 @@
+Nuvoton NPCM7XX 10/100 Ethernet MAC Controller (EMC)
+
+The NPCM7XX provides one or two Ethernet MAC RMII Controllers
+for WAN/LAN applications
+
+Required properties:
+- device_type : Should be "network"
+- compatible : "nuvoton,npcm750-emc" for Poleg NPCM7XX.
+- reg : Offset and length of the register set for the device.
+- interrupts : Contain the emc interrupts with flags for falling edge.
+ first interrupt dedicated to Txirq
+ second interrupt dedicated to Rxirq
+- phy-mode : Should be "rmii" (see ethernet.txt in the same directory)
+- clocks : phandle of emc reference clock.
+- resets : phandle to the reset control for this device.
+- use-ncsi : Use the NC-SI stack instead of an MDIO PHY
+
+Example:
+
+emc0: eth@f0825000 {
+ device_type = "network";
+ compatible = "nuvoton,npcm750-emc";
+ reg = <0xf0825000 0x1000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ phy-mode = "rmii";
+ clocks = <&clk NPCM7XX_CLK_AHB>;
+
+ #use-ncsi; /* add this to support ncsi */
+
+ clock-names = "clk_emc";
+ resets = <&rstc 6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r1_pins
+ &r1err_pins
+ &r1md_pins>;
+ status = "okay";
+};
--
2.18.0
