EBU provides an interrupt line for the PCI_INTA interrupt. Route
easy50712's PCI interrupt to EBU so the interrupt line is configured
correctly (using IRQ_TYPE_LEVEL_LOW, this was previously hardcoded in
the PCI driver) and ACKed properly.
Signed-off-by: Martin Blumenstingl <martin.blumensti...@googlemail.com>
---
arch/mips/boot/dts/lantiq/easy50712.dts | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts
b/arch/mips/boot/dts/lantiq/easy50712.dts
index 1ce20b7d05cb..33c26b93cfc9 100644
--- a/arch/mips/boot/dts/lantiq/easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/easy50712.dts
@@ -1,6 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+
/include/ "danube.dtsi"
/ {
@@ -105,7 +107,7 @@
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
- 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+ 0x7000 0 0 1 &ebu0 0 IRQ_TYPE_LEVEL_LOW // slot
14
>;
gpios-reset = <&gpio 21 0>;
req-mask = <0x1>; /* GNT1 */
--
2.22.0
