On 7/14/19 1:46 PM, Moritz Fischer wrote:
Hi Thor,
On Thu, Jul 11, 2019 at 03:32:49PM -0500, thor.tha...@linux.intel.com wrote:
From: Thor Thayer <thor.tha...@linux.intel.com>
In preparation for adding newer V2 parts that use a FIFO,
reorganize altera_cvp_chk_error() and change the write
function to block based.
V2 parts have a block size matching the FIFO while older
V1 parts write a 32 bit word at a time.
Signed-off-by: Thor Thayer <thor.tha...@linux.intel.com>
---
drivers/fpga/altera-cvp.c | 72 ++++++++++++++++++++++++++++++-----------------
1 file changed, 46 insertions(+), 26 deletions(-)
diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
index 04f2b2a072a7..59835f6f9b2d 100644
--- a/drivers/fpga/altera-cvp.c
+++ b/drivers/fpga/altera-cvp.c
@@ -140,6 +140,41 @@ static int altera_cvp_wait_status(struct altera_cvp_conf
*conf, u32 status_mask,
return -ETIMEDOUT;
}
+static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
Please drop the inline here.
OK. Thanks.
+{
+ struct altera_cvp_conf *conf = mgr->priv;
+ u32 val;
+
+ /* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
+ altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
+ if (val & VSE_CVP_STATUS_CFG_ERR) {
+ dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
+ bytes);
+ return -EPROTO;
+ }
+ return 0;
+}
+
+static int altera_cvp_send_block(struct altera_cvp_conf *conf,
+ const u32 *data, size_t len)
+{
+ int i, remainder;
+ u32 mask, words = len / sizeof(u32);
Reverse xmas-tree, please.
OK. I'm new to the reverse xmas-tree but if I read [0] correctly, it
isn't the size of the variable that is important but the length of the
declaration.
+
+ for (i = 0; i < words; i++)
+ conf->write_data(conf, *data++);
+
+ /* write up to 3 trailing bytes, if any */
+ remainder = len % sizeof(u32);
+ if (remainder) {
+ mask = BIT(remainder * 8) - 1;
+ if (mask)
+ conf->write_data(conf, *data & mask);
+ }
+
+ return 0;
+}
+
static int altera_cvp_teardown(struct fpga_manager *mgr,
struct fpga_image_info *info)
{
@@ -262,39 +297,29 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
return 0;
}
-static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
-{
- struct altera_cvp_conf *conf = mgr->priv;
- u32 val;
-
- /* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
- altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
- if (val & VSE_CVP_STATUS_CFG_ERR) {
- dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
- bytes);
- return -EPROTO;
- }
- return 0;
-}
-
static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
size_t count)
{
struct altera_cvp_conf *conf = mgr->priv;
const u32 *data;
- size_t done, remaining;
+ size_t done, remaining, len;
Reverse xmas-tree please.
OK.
int status = 0;
- u32 mask;
/* STEP 9 - write 32-bit data from RBF file to CVP data register */
data = (u32 *)buf;
Are there endianness concerns with this?
No, this maintains the previous big endian byte handling for
Cyclone5/Arria10. The Stratix10 bitstream is generated in 4KB chunks.
remaining = count;
done = 0;
- while (remaining >= 4) {
- conf->write_data(conf, *data++);
- done += 4;
- remaining -= 4;
+ while (remaining) {
+ if (remaining >= sizeof(u32))
+ len = sizeof(u32);
+ else
+ len = remaining;
+
+ altera_cvp_send_block(conf, data, len);
+ data++;
+ done += len;
+ remaining -= len;
/*
* STEP 10 (optional) and STEP 11
@@ -312,11 +337,6 @@ static int altera_cvp_write(struct fpga_manager *mgr,
const char *buf,
}
}
- /* write up to 3 trailing bytes, if any */
- mask = BIT(remaining * 8) - 1;
- if (mask)
- conf->write_data(conf, *data & mask);
-
if (altera_cvp_chkcfg)
status = altera_cvp_chk_error(mgr, count);
--
2.7.4
Thanks,
Moritz
I wasn't sure if you preferred this as a separate patch or squashed into
patch #3. Having a separate patch makes the migration a little clearer.
Thanks for reviewing!
[0] https://www.spinics.net/lists/netdev/msg402833.html
