On Fri, 12 Jul 2019 13:53:30 +0200
Vitor Soares <vitor.soa...@synopsys.com> wrote:
> For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
> spi and i2c mode.
>
> The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to
> them.
>
> Signed-off-by: Vitor Soares <vitor.soa...@synopsys.com>
> Acked-by: Lorenzo Bianconi <lore...@kernel.org>
> ---
> Changes in v4:
> Remove hw_id variable
>
> Changes in v3:
> Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
> Use st_lsm6dsx_probe new form
>
> Changes in v2:
> Add support for LSM6DSR
> Set pm_ops to st_lsm6dsx_pm_ops
>
> drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++-
> drivers/iio/imu/st_lsm6dsx/Makefile | 1 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 58
> +++++++++++++++++++++++++++++
> 3 files changed, 66 insertions(+), 1 deletion(-)
> create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig
> b/drivers/iio/imu/st_lsm6dsx/Kconfig
> index 9e59297..6b5a73c 100644
> --- a/drivers/iio/imu/st_lsm6dsx/Kconfig
> +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
> @@ -1,11 +1,12 @@
>
> config IIO_ST_LSM6DSX
> tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
> - depends on (I2C || SPI)
> + depends on (I2C || SPI || I3C)
> select IIO_BUFFER
> select IIO_KFIFO_BUF
> select IIO_ST_LSM6DSX_I2C if (I2C)
> select IIO_ST_LSM6DSX_SPI if (SPI_MASTER)
> + select IIO_ST_LSM6DSX_I3C if (I3C)
> help
> Say yes here to build support for STMicroelectronics LSM6DSx imu
> sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
> @@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI
> tristate
> depends on IIO_ST_LSM6DSX
> select REGMAP_SPI
> +
> +config IIO_ST_LSM6DSX_I3C
> + tristate
> + depends on IIO_ST_LSM6DSX
> + select REGMAP_I3C
> diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile
> b/drivers/iio/imu/st_lsm6dsx/Makefile
> index e5f733c..c676965 100644
> --- a/drivers/iio/imu/st_lsm6dsx/Makefile
> +++ b/drivers/iio/imu/st_lsm6dsx/Makefile
> @@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
> obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
> obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
> obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o
> +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> new file mode 100644
> index 0000000..2e89524
> --- /dev/null
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> @@ -0,0 +1,58 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
> + *
> + * Author: Vitor Soares <vitor.soa...@synopsys.com>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i3c/device.h>
> +#include <linux/i3c/master.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +
> +#include "st_lsm6dsx.h"
> +
> +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
> + I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
> + I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
I think you need an uintptr_t cast here:
I3C_DEVICE(0x0104, 0x006C, (void *)(uintptr_t)ST_LSM6DSO_ID),
I3C_DEVICE(0x0104, 0x006B, (void *)(uintptr_t)ST_LSM6DSR_ID),
otherwise gcc might complain that the integer and pointer do not have
the same size (on 64-bit architectures).
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
> +
> +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
This can be moved ...
> +
> +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
> +{
... here without the static and const qualifiers:
struct regmap_config regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
> + const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
> + st_lsm6dsx_i3c_ids);
> + struct regmap *regmap;
> +
> + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
> + if (IS_ERR(regmap)) {
> + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
> + (int)PTR_ERR(regmap));
> + return PTR_ERR(regmap);
> + }
> +
> + return st_lsm6dsx_probe(&i3cdev->dev, 0, (int)id->data, regmap);
uintptr_t cast here.
> +}
> +
> +static struct i3c_driver st_lsm6dsx_driver = {
> + .driver = {
> + .name = "st_lsm6dsx_i3c",
> + .pm = &st_lsm6dsx_pm_ops,
> + },
> + .probe = st_lsm6dsx_i3c_probe,
> + .id_table = st_lsm6dsx_i3c_ids,
> +};
> +module_i3c_driver(st_lsm6dsx_driver);
> +
> +MODULE_AUTHOR("Vitor Soares <vitor.soa...@synopsys.com>");
> +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
> +MODULE_LICENSE("GPL v2");
