On Thu, Aug 30, 2007 at 04:11:03AM -0700, n wrote:
> hello, with kernel 2.6.22.5 using the new pata_pdc202xx_old driver it
> doesn detect the cable right on this seagate drive (i tried switching ports
> / cables ...etc)
.....
> XFS mounting filesystem sdc3
> Ending clean XFS mount for filesystem: sdc3
> XFS mounting filesystem sdc4
> Ending clean XFS mount for filesystem: sdc4
> XFS mounting filesystem sdd1
> Ending clean XFS mount for filesystem: sdd1
> XFS mounting filesystem sde1
> Ending clean XFS mount for filesystem: sde1
> XFS mounting filesystem sdf1
> Ending clean XFS mount for filesystem: sdf1
> XFS mounting filesystem sdb1
> Ending clean XFS mount for filesystem: sdb1
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
> ata1.00: (BMDMA stat 0x4)
> ata1.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out
> res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
> ata1: soft resetting port
> ata1.00: configured for UDMA/33
> ata1: EH complete
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
> ata1.00: (BMDMA stat 0x4)
> ata1.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out
> res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
> ata1: soft resetting port
> ata1.00: configured for UDMA/33
.....
> ata1.00: limiting speed to PIO4
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
> ata1.00: (BMDMA stat 0x4)
> ata1.00: cmd ca/00:00:21:9d:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
> out
> res 51/84:00:21:9d:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
> ata1: soft resetting port
> ata1.00: configured for PIO4
> ata1: EH complete
> sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> xfs_force_shutdown(sda1,0x1) called from line 423 of file fs/xfs/xfs_rw.c.
> Return address = 0xc020cea8
> Filesystem "sda1": I/O Error Detected. Shutting down filesystem: sda1
> Please umount the filesystem, and rectify the problem(s)
> I/O error in filesystem ("sda1") meta-data dev sda1 block 0x6fc9be2
> ("xlog_bwrite") error 5 buf count 262144
> XFS: failed to locate log tail
> XFS: log mount/recovery failed: error 5
> XFS: log mount failed
EIO to a write to the log on recovery of the filesystem. Sounds like the
driver returned an error and XFS shut the filesysetm down to protect
it from damage.
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
>
> after the kernel finnishes booting i can mount that drive fine (also all
> the xfs_check xfs_repair ..etc say there is no errors)
So XFS is doing the right thing and when you get the driver errors
sorted out the filesystem shoul dbe fine....
Cheers,
Dave.
--
Dave Chinner
Principal Engineer
SGI Australian Software Group
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
