Hi,
Am Freitag, 21. Juni 2019, 20:00:17 CEST schrieb Katsuhiro Suzuki:
> This patch adds missing mdio and ethernet PHY nodes for rk3328 ASUS
> tinker board.
>
> Signed-off-by: Katsuhiro Suzuki <katsuh...@katsuster.net>
just for my understanding, which problem does this solve?
Normally the gmac can establish connections just fine on
the rk3288 by probing the phy in the automatic way.
And I also don't see any additional properties like phy
interrupt line below.
Thanks
Heiko
> ---
> arch/arm/boot/dts/rk3288-tinker.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi
> b/arch/arm/boot/dts/rk3288-tinker.dtsi
> index 293576869546..3190817e8d5d 100644
> --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
> +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
> @@ -117,6 +117,7 @@
> assigned-clocks = <&cru SCLK_MAC>;
> assigned-clock-parents = <&ext_gmac>;
> clock_in_out = "input";
> + phy-handle = <&phy0>;
> phy-mode = "rgmii";
> phy-supply = <&vcc33_lan>;
> pinctrl-names = "default";
> @@ -127,6 +128,17 @@
> tx_delay = <0x30>;
> rx_delay = <0x10>;
> status = "ok";
> +
> + mdio0 {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + phy0: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + };
> + };
> };
>
> &gpu {
>
