[PATCH] riscv: dts: Add DT node for SiFive FU540 Ethernet controller driver

[Yash Shah]

DT node for SiFive FU540-C000 GEMGXL Ethernet controller driver added

Signed-off-by: Yash Shah <yash.s...@sifive.com>
---
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi 
b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 4e8fbde..584e737 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -225,5 +225,25 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                };
+               eth0: ethernet@10090000 {
+                       compatible = "sifive,fu540-macb";
+                       interrupt-parent = <&plic0>;
+                       interrupts = <53>;
+                       reg = <0x0 0x10090000 0x0 0x2000
+                              0x0 0x100a0000 0x0 0x1000>;
+                       reg-names = "control";
+                       local-mac-address = [00 00 00 00 00 00];
+                       phy-mode = "gmii";
+                       phy-handle = <&phy1>;
+                       clock-names = "pclk", "hclk";
+                       clocks = <&prci PRCI_CLK_GEMGXLPLL>,
+                                <&prci PRCI_CLK_GEMGXLPLL>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       phy1: ethernet-phy@0 {
+                               reg = <0>;
+                       };
+               };
+
        };
 };
-- 
1.9.1