Hi All,
I think this may have got lost in the change of maintainer for mtd.
On 22/05/19 12:06 PM, Chris Packham wrote:
> Because PPB unlocking unlocks the whole chip cfi_ppb_unlock() needs to
> remember the locked status for each sector so it can re-lock the
> unaddressed sectors. Dynamically calculate the maximum number of sectors
> rather than using a hardcoded value that is too small for larger chips.
>
> Tested with Spansion S29GL01GS11TFI flash device.
>
> Signed-off-by: Chris Packham <chris.pack...@alliedtelesis.co.nz>
> ---
> drivers/mtd/chips/cfi_cmdset_0002.c | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c
> b/drivers/mtd/chips/cfi_cmdset_0002.c
> index c8fa5906bdf9..a1a7d334aa82 100644
> --- a/drivers/mtd/chips/cfi_cmdset_0002.c
> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
> @@ -2533,8 +2533,6 @@ struct ppb_lock {
> int locked;
> };
>
> -#define MAX_SECTORS 512
> -
> #define DO_XXLOCK_ONEBLOCK_LOCK ((void *)1)
> #define DO_XXLOCK_ONEBLOCK_UNLOCK ((void *)2)
> #define DO_XXLOCK_ONEBLOCK_GETLOCK ((void *)3)
> @@ -2633,6 +2631,7 @@ static int __maybe_unused cfi_ppb_unlock(struct
> mtd_info *mtd, loff_t ofs,
> int i;
> int sectors;
> int ret;
> + int max_sectors;
>
> /*
> * PPB unlocking always unlocks all sectors of the flash chip.
> @@ -2640,7 +2639,11 @@ static int __maybe_unused cfi_ppb_unlock(struct
> mtd_info *mtd, loff_t ofs,
> * first check the locking status of all sectors and save
> * it for future use.
> */
> - sect = kcalloc(MAX_SECTORS, sizeof(struct ppb_lock), GFP_KERNEL);
> + max_sectors = 0;
> + for (i = 0; i < mtd->numeraseregions; i++)
> + max_sectors += regions[i].numblocks;
> +
> + sect = kcalloc(max_sectors, sizeof(struct ppb_lock), GFP_KERNEL);
> if (!sect)
> return -ENOMEM;
>
> @@ -2689,9 +2692,9 @@ static int __maybe_unused cfi_ppb_unlock(struct
> mtd_info *mtd, loff_t ofs,
> }
>
> sectors++;
> - if (sectors >= MAX_SECTORS) {
> + if (sectors >= max_sectors) {
> printk(KERN_ERR "Only %d sectors for PPB locking
> supported!\n",
> - MAX_SECTORS);
> + max_sectors);
> kfree(sect);
> return -EINVAL;
> }
>
