[ Upstream commit 8979117765c19edc3b01cc0ef853537bf93eea4b ] Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb" clock to determine if it needs to configure the IP block as operating at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both clocks as IMX6SX_CLK_SDMA results in driver incorrectly thinking that ratio is 1:1 which results in broken SDMA funtionality. Fix the code to specify IMX6SX_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect clock ratio.
Signed-off-by: Andrey Smirnov <[email protected]> Cc: Angus Ainslie (Purism) <[email protected]> Cc: Chris Healy <[email protected]> Cc: Lucas Stach <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Shawn Guo <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Shawn Guo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> --- arch/arm/boot/dts/imx6sx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index d64438bfa68b..61ad4e296257 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -766,7 +766,7 @@ compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_SDMA>, + clocks = <&clks IMX6SX_CLK_IPG>, <&clks IMX6SX_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; -- 2.20.1
