On 11. 06. 19 12:07, Manish Narani wrote: > Add the new compatible string for ZynqMP SD Host Controller for its use > in the Arasan SDHCI driver for some of the ZynqMP specific operations. > Add required properties for the same. > > Signed-off-by: Manish Narani <manish.nar...@xilinx.com> > --- > This patch depends on the below series of patches: > https://lkml.org/lkml/2019/6/11/286 > --- > arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi > b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi > index 9aa6734..6da5b82 100644 > --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi > +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi > @@ -493,21 +493,25 @@ > }; > > sdhci0: mmc@ff160000 { > - compatible = "arasan,sdhci-8.9a"; > + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; > status = "disabled"; > interrupt-parent = <&gic>; > interrupts = <0 48 4>; > reg = <0x0 0xff160000 0x0 0x1000>; > clock-names = "clk_xin", "clk_ahb"; > + clock-output-names = "clk_sd0"; > + #clock-cells = <0>; > }; > > sdhci1: mmc@ff170000 { > - compatible = "arasan,sdhci-8.9a"; > + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; > status = "disabled"; > interrupt-parent = <&gic>; > interrupts = <0 49 4>; > reg = <0x0 0xff170000 0x0 0x1000>; > clock-names = "clk_xin", "clk_ahb"; > + clock-output-names = "clk_sd1"; > + #clock-cells = <0>; > }; > > smmu: smmu@fd800000 { >
note: I am waiting when binding is acked and then this can go to my tree. Thanks, Michal
