The mv88e6250 has port_base_addr 0x8 or 0x18 (depending on
configuration pins), so it constitutes a new family and hence needs
its own compatible string.
Reviewed-by: Andrew Lunn <and...@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villem...@prevas.dk>
---
Documentation/devicetree/bindings/net/dsa/marvell.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt
b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index feb007af13cb..6f9538974bb9 100644
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -21,10 +21,13 @@ which is at a different MDIO base address in different
switch families.
6341, 6350, 6351, 6352
- "marvell,mv88e6190" : Switch has base address 0x00. Use with models:
6190, 6190X, 6191, 6290, 6390, 6390X
+- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model:
+ 6250
Required properties:
-- compatible : Should be one of "marvell,mv88e6085" or
- "marvell,mv88e6190" as indicated above
+- compatible : Should be one of "marvell,mv88e6085",
+ "marvell,mv88e6190" or "marvell,mv88e6250" as
+ indicated above
- reg : Address on the MII bus for the switch.
Optional properties:
--
2.20.1
