Michael Kelley <mikel...@microsoft.com> writes:
> Break out parts of mshyperv.h that are ISA independent into a
> separate file in include/asm-generic. This move facilitates
> ARM64 code reusing these definitions and avoids code
> duplication. No functionality or behavior is changed.
>
> Signed-off-by: Michael Kelley <mikel...@microsoft.com>
> ---
> MAINTAINERS | 1 +
> arch/x86/include/asm/mshyperv.h | 147 +-------------------------------
> include/asm-generic/mshyperv.h | 182
> ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 187 insertions(+), 143 deletions(-)
> create mode 100644 include/asm-generic/mshyperv.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index cf2a5b7..521192d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7308,6 +7308,7 @@ F: net/vmw_vsock/hyperv_transport.c
> F: include/clocksource/hyperv_timer.h
> F: include/linux/hyperv.h
> F: include/uapi/linux/hyperv.h
> +F: include/asm-generic/mshyperv.h
> F: tools/hv/
> F: Documentation/ABI/stable/sysfs-bus-vmbus
>
> diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
> index f4fa8a9..2a793bf 100644
> --- a/arch/x86/include/asm/mshyperv.h
> +++ b/arch/x86/include/asm/mshyperv.h
> @@ -3,84 +3,15 @@
> #define _ASM_X86_MSHYPER_H
>
> #include <linux/types.h>
> -#include <linux/atomic.h>
> #include <linux/nmi.h>
> #include <asm/io.h>
> #include <asm/hyperv-tlfs.h>
> #include <asm/nospec-branch.h>
>
> -#define VP_INVAL U32_MAX
> -
> -struct ms_hyperv_info {
> - u32 features;
> - u32 misc_features;
> - u32 hints;
> - u32 nested_features;
> - u32 max_vp_index;
> - u32 max_lp_index;
> -};
> -
> -extern struct ms_hyperv_info ms_hyperv;
> -
> -
> typedef int (*hyperv_fill_flush_list_func)(
> struct hv_guest_mapping_flush_list *flush,
> void *data);
>
> -/*
> - * Generate the guest ID.
> - */
> -
> -static inline __u64 generate_guest_id(__u64 d_info1, __u64 kernel_version,
> - __u64 d_info2)
> -{
> - __u64 guest_id = 0;
> -
> - guest_id = (((__u64)HV_LINUX_VENDOR_ID) << 48);
> - guest_id |= (d_info1 << 48);
> - guest_id |= (kernel_version << 16);
> - guest_id |= d_info2;
> -
> - return guest_id;
> -}
> -
> -
> -/* Free the message slot and signal end-of-message if required */
> -static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
> -{
> - /*
> - * On crash we're reading some other CPU's message page and we need
> - * to be careful: this other CPU may already had cleared the header
> - * and the host may already had delivered some other message there.
> - * In case we blindly write msg->header.message_type we're going
> - * to lose it. We can still lose a message of the same type but
> - * we count on the fact that there can only be one
> - * CHANNELMSG_UNLOAD_RESPONSE and we don't care about other messages
> - * on crash.
> - */
> - if (cmpxchg(&msg->header.message_type, old_msg_type,
> - HVMSG_NONE) != old_msg_type)
> - return;
> -
> - /*
> - * Make sure the write to MessageType (ie set to
> - * HVMSG_NONE) happens before we read the
> - * MessagePending and EOMing. Otherwise, the EOMing
> - * will not deliver any more messages since there is
> - * no empty slot
> - */
> - mb();
> -
> - if (msg->header.message_flags.msg_pending) {
> - /*
> - * This will cause message queue rescan to
> - * possibly deliver another msg from the
> - * hypervisor
> - */
> - wrmsrl(HV_X64_MSR_EOM, 0);
> - }
> -}
> -
> #define hv_init_timer(timer, tick) \
> wrmsrl(HV_X64_MSR_STIMER0_COUNT + (2*timer), tick)
> #define hv_init_timer_config(timer, val) \
> @@ -97,6 +28,8 @@ static inline void vmbus_signal_eom(struct hv_message *msg,
> u32 old_msg_type)
>
> #define hv_get_vp_index(index) rdmsrl(HV_X64_MSR_VP_INDEX, index)
>
> +#define hv_signal_eom() wrmsrl(HV_X64_MSR_EOM, 0)
> +
> #define hv_get_synint_state(int_num, val) \
> rdmsrl(HV_X64_MSR_SINT0 + int_num, val)
> #define hv_set_synint_state(int_num, val) \
> @@ -122,13 +55,6 @@ static inline void vmbus_signal_eom(struct hv_message
> *msg, u32 old_msg_type)
> #define trace_hyperv_callback_vector hyperv_callback_vector
> #endif
> void hyperv_vector_handler(struct pt_regs *regs);
> -void hv_setup_vmbus_irq(void (*handler)(void));
> -void hv_remove_vmbus_irq(void);
> -
> -void hv_setup_kexec_handler(void (*handler)(void));
> -void hv_remove_kexec_handler(void);
> -void hv_setup_crash_handler(void (*handler)(struct pt_regs *regs));
> -void hv_remove_crash_handler(void);
>
> /*
> * Routines for stimer0 Direct Mode handling.
> @@ -136,8 +62,6 @@ static inline void vmbus_signal_eom(struct hv_message
> *msg, u32 old_msg_type)
> */
> void hv_stimer0_vector_handler(struct pt_regs *regs);
> void hv_stimer0_callback_vector(void);
> -int hv_setup_stimer0_irq(int *irq, int *vector, void (*handler)(void));
> -void hv_remove_stimer0_irq(int irq);
>
> static inline void hv_enable_stimer0_percpu_irq(int irq) {}
> static inline void hv_disable_stimer0_percpu_irq(int irq) {}
> @@ -282,14 +206,6 @@ static inline u64 hv_do_rep_hypercall(u16 code, u16
> rep_count, u16 varhead_size,
> return status;
> }
>
> -/*
> - * Hypervisor's notion of virtual processor ID is different from
> - * Linux' notion of CPU ID. This information can only be retrieved
> - * in the context of the calling CPU. Setup a map for easy access
> - * to this information.
> - */
> -extern u32 *hv_vp_index;
> -extern u32 hv_max_vp_index;
> extern struct hv_vp_assist_page **hv_vp_assist_page;
>
> static inline struct hv_vp_assist_page *hv_get_vp_assist_page(unsigned int
> cpu)
> @@ -300,63 +216,8 @@ static inline struct hv_vp_assist_page
> *hv_get_vp_assist_page(unsigned int cpu)
> return hv_vp_assist_page[cpu];
> }
>
> -/**
> - * hv_cpu_number_to_vp_number() - Map CPU to VP.
> - * @cpu_number: CPU number in Linux terms
> - *
> - * This function returns the mapping between the Linux processor
> - * number and the hypervisor's virtual processor number, useful
> - * in making hypercalls and such that talk about specific
> - * processors.
> - *
> - * Return: Virtual processor number in Hyper-V terms
> - */
> -static inline int hv_cpu_number_to_vp_number(int cpu_number)
> -{
> - return hv_vp_index[cpu_number];
> -}
> -
> -static inline int cpumask_to_vpset(struct hv_vpset *vpset,
> - const struct cpumask *cpus)
> -{
> - int cpu, vcpu, vcpu_bank, vcpu_offset, nr_bank = 1;
> -
> - /* valid_bank_mask can represent up to 64 banks */
> - if (hv_max_vp_index / 64 >= 64)
> - return 0;
> -
> - /*
> - * Clear all banks up to the maximum possible bank as hv_tlb_flush_ex
> - * structs are not cleared between calls, we risk flushing unneeded
> - * vCPUs otherwise.
> - */
> - for (vcpu_bank = 0; vcpu_bank <= hv_max_vp_index / 64; vcpu_bank++)
> - vpset->bank_contents[vcpu_bank] = 0;
> -
> - /*
> - * Some banks may end up being empty but this is acceptable.
> - */
> - for_each_cpu(cpu, cpus) {
> - vcpu = hv_cpu_number_to_vp_number(cpu);
> - if (vcpu == VP_INVAL)
> - return -1;
> - vcpu_bank = vcpu / 64;
> - vcpu_offset = vcpu % 64;
> - __set_bit(vcpu_offset, (unsigned long *)
> - &vpset->bank_contents[vcpu_bank]);
> - if (vcpu_bank >= nr_bank)
> - nr_bank = vcpu_bank + 1;
> - }
> - vpset->valid_bank_mask = GENMASK_ULL(nr_bank - 1, 0);
> - return nr_bank;
> -}
> -
> void __init hyperv_init(void);
I would actually expect to see hyperv_init() on all architectures so it
can probably go to 'generic' too.
> void hyperv_setup_mmu_ops(void);
> -void hyperv_report_panic(struct pt_regs *regs, long err);
> -void hyperv_report_panic_msg(phys_addr_t pa, size_t size);
> -bool hv_is_hyperv_initialized(void);
> -void hyperv_cleanup(void);
>
> void hyperv_reenlightenment_intr(struct pt_regs *regs);
> void set_hv_tscchange_cb(void (*cb)(void));
> @@ -379,8 +240,6 @@ static inline void hv_apic_init(void) {}
>
> #else /* CONFIG_HYPERV */
> static inline void hyperv_init(void) {}
> -static inline bool hv_is_hyperv_initialized(void) { return false; }
> -static inline void hyperv_cleanup(void) {}
> static inline void hyperv_setup_mmu_ops(void) {}
> static inline void set_hv_tscchange_cb(void (*cb)(void)) {}
> static inline void clear_hv_tscchange_cb(void) {}
> @@ -397,4 +256,6 @@ static inline int hyperv_flush_guest_mapping_range(u64 as,
> }
> #endif /* CONFIG_HYPERV */
>
> +#include <asm-generic/mshyperv.h>
> +
> #endif
> diff --git a/include/asm-generic/mshyperv.h b/include/asm-generic/mshyperv.h
> new file mode 100644
> index 0000000..d4eaa07
> --- /dev/null
> +++ b/include/asm-generic/mshyperv.h
> @@ -0,0 +1,182 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +/*
> + * Linux-specific definitions for managing interactions with Microsoft's
> + * Hyper-V hypervisor. The definitions in this file are architecture
> + * independent. See arch/<arch>/include/asm/mshyperv.h for definitions
> + * that are specific to architecture <arch>.
> + *
> + * Definitions that are specified in the Hyper-V Top Level Functional
> + * Spec (TLFS) should not go in this file, but should instead go in
> + * hyperv-tlfs.h.
> + *
> + * Copyright (C) 2019, Microsoft, Inc.
> + *
> + * Author : Michael Kelley <mikel...@microsoft.com>
> + */
> +
> +#ifndef _ASM_GENERIC_MSHYPERV_H
> +#define _ASM_GENERIC_MSHYPERV_H
> +
> +#include <linux/types.h>
> +#include <linux/atomic.h>
> +#include <linux/bitops.h>
> +#include <linux/interrupt.h>
> +#include <linux/clocksource.h>
> +#include <linux/irq.h>
> +#include <linux/irqdesc.h>
> +#include <asm/hyperv-tlfs.h>
This seems a little bit too much, in particular, I think we don't need
#include <linux/interrupt.h>
#include <linux/clocksource.h>
#include <linux/irq.h>
#include <linux/irqdesc.h>
we'll need 'struct pt_regs' definition but I'd suggest we use
#include <linux/ptrace.h>
or even
#include <asm/ptrace.h>
> +
> +struct ms_hyperv_info {
> + u32 features;
> + u32 misc_features;
> + u32 hints;
> + u32 nested_features;
> + u32 max_vp_index;
> + u32 max_lp_index;
> +};
> +extern struct ms_hyperv_info ms_hyperv;
> +
> +extern u64 hv_do_hypercall(u64 control, void *inputaddr, void *outputaddr);
> +extern u64 hv_do_fast_hypercall8(u16 control, u64 input8);
> +
> +
> +/* Generate the guest OS identifier as described in the Hyper-V TLFS */
> +static inline __u64 generate_guest_id(__u64 d_info1, __u64 kernel_version,
> + __u64 d_info2)
> +{
> + __u64 guest_id = 0;
> +
> + guest_id = (((__u64)HV_LINUX_VENDOR_ID) << 48);
> + guest_id |= (d_info1 << 48);
> + guest_id |= (kernel_version << 16);
> + guest_id |= d_info2;
> +
> + return guest_id;
> +}
> +
> +
> +/* Free the message slot and signal end-of-message if required */
> +static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
> +{
> + /*
> + * On crash we're reading some other CPU's message page and we need
> + * to be careful: this other CPU may already had cleared the header
> + * and the host may already had delivered some other message there.
> + * In case we blindly write msg->header.message_type we're going
> + * to lose it. We can still lose a message of the same type but
> + * we count on the fact that there can only be one
> + * CHANNELMSG_UNLOAD_RESPONSE and we don't care about other messages
> + * on crash.
> + */
> + if (cmpxchg(&msg->header.message_type, old_msg_type,
> + HVMSG_NONE) != old_msg_type)
> + return;
> +
> + /*
> + * The cmxchg() above does an implicit memory barrier to
> + * ensure the write to MessageType (ie set to
> + * HVMSG_NONE) happens before we read the
> + * MessagePending and EOMing. Otherwise, the EOMing
> + * will not deliver any more messages since there is
> + * no empty slot
> + */
> + if (msg->header.message_flags.msg_pending) {
> + /*
> + * This will cause message queue rescan to
> + * possibly deliver another msg from the
> + * hypervisor
> + */
> + hv_signal_eom();
> + }
> +}
> +
> +void hv_setup_vmbus_irq(void (*handler)(void));
> +void hv_remove_vmbus_irq(void);
> +void hv_enable_vmbus_irq(void);
> +void hv_disable_vmbus_irq(void);
> +
> +void hv_setup_kexec_handler(void (*handler)(void));
> +void hv_remove_kexec_handler(void);
> +void hv_setup_crash_handler(void (*handler)(struct pt_regs *regs));
> +void hv_remove_crash_handler(void);
> +
> +#if IS_ENABLED(CONFIG_HYPERV)
> +/*
> + * Hypervisor's notion of virtual processor ID is different from
> + * Linux' notion of CPU ID. This information can only be retrieved
> + * in the context of the calling CPU. Setup a map for easy access
> + * to this information.
> + */
> +extern u32 *hv_vp_index;
> +extern u32 hv_max_vp_index;
> +
> +/* Sentinel value for an uninitialized entry in hv_vp_index array */
> +#define VP_INVAL U32_MAX
> +
> +/**
> + * hv_cpu_number_to_vp_number() - Map CPU to VP.
> + * @cpu_number: CPU number in Linux terms
> + *
> + * This function returns the mapping between the Linux processor
> + * number and the hypervisor's virtual processor number, useful
> + * in making hypercalls and such that talk about specific
> + * processors.
> + *
> + * Return: Virtual processor number in Hyper-V terms
> + */
> +static inline int hv_cpu_number_to_vp_number(int cpu_number)
> +{
> + return hv_vp_index[cpu_number];
> +}
> +
> +static inline int cpumask_to_vpset(struct hv_vpset *vpset,
> + const struct cpumask *cpus)
> +{
> + int cpu, vcpu, vcpu_bank, vcpu_offset, nr_bank = 1;
> +
> + /* valid_bank_mask can represent up to 64 banks */
> + if (hv_max_vp_index / 64 >= 64)
> + return 0;
> +
> + /*
> + * Clear all banks up to the maximum possible bank as hv_tlb_flush_ex
> + * structs are not cleared between calls, we risk flushing unneeded
> + * vCPUs otherwise.
> + */
> + for (vcpu_bank = 0; vcpu_bank <= hv_max_vp_index / 64; vcpu_bank++)
> + vpset->bank_contents[vcpu_bank] = 0;
> +
> + /*
> + * Some banks may end up being empty but this is acceptable.
> + */
> + for_each_cpu(cpu, cpus) {
> + vcpu = hv_cpu_number_to_vp_number(cpu);
> + if (vcpu == VP_INVAL)
> + return -1;
> + vcpu_bank = vcpu / 64;
> + vcpu_offset = vcpu % 64;
> + __set_bit(vcpu_offset, (unsigned long *)
> + &vpset->bank_contents[vcpu_bank]);
> + if (vcpu_bank >= nr_bank)
> + nr_bank = vcpu_bank + 1;
> + }
> + vpset->valid_bank_mask = GENMASK_ULL(nr_bank - 1, 0);
> + return nr_bank;
> +}
> +
> +void hyperv_report_panic(struct pt_regs *regs, long err);
> +void hyperv_report_panic_msg(phys_addr_t pa, size_t size);
> +bool hv_is_hyperv_initialized(void);
> +void hyperv_cleanup(void);
> +#else /* CONFIG_HYPERV */
> +static inline bool hv_is_hyperv_initialized(void) { return false; }
> +static inline void hyperv_cleanup(void) {}
> +#endif /* CONFIG_HYPERV */
> +
> +#if IS_ENABLED(CONFIG_HYPERV)
> +extern int hv_setup_stimer0_irq(int *irq, int *vector, void
> (*handler)(void));
> +extern void hv_remove_stimer0_irq(int irq);
> +#endif
> +
> +#endif
With the nitpicks above,
Reviewed-by: Vitaly Kuznetsov <vkuzn...@redhat.com>
--
Vitaly
