The GPIO Input Buffer Enable register is used to control the input
enable of each individual GPIO port. When an individual GPIO port's
direction is set to input (GPIO_GPDIR[DRn=0]), the associated
input enable must be set (GPIOxGPIE[IEn]=1) to propagate the port
value to the GPIO Data Register.
This patch enable port input and interrupt.
Signed-off-by: Zhang Ying-22455 <ying.zhang22...@nxp.com>
Signed-off-by: Chuanhua Han <chuanhua....@nxp.com>
---
drivers/gpio/gpio-mpc8xxx.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index c8673a5d9412..555e0e7957d9 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -373,9 +373,10 @@ static int mpc8xxx_probe(struct platform_device *pdev)
if (!mpc8xxx_gc->irq)
return 0;
- /* ack and mask all irqs */
+ /* ack and enable irqs */
gc->write_reg(mpc8xxx_gc->regs + GPIO_IER, 0xffffffff);
- gc->write_reg(mpc8xxx_gc->regs + GPIO_IMR, 0);
+ gc->write_reg(mpc8xxx_gc->regs + GPIO_IMR, 0xffffffff);
+ gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR2, 0xffffffff);
irq_set_chained_handler_and_data(mpc8xxx_gc->irqn,
mpc8xxx_gpio_irq_cascade, mpc8xxx_gc);
--
2.17.1
