Hello: Currently running 2.2.18 with a Celeron 333 MHz and 1 256MB SDRAM PC100 chip on the motherboard. The MB will support up to a P-III 600 and 1GB of RAM using 256MB Chips....I'm looking at going to the following in addition to the existing RAM: TWO - **256MB 32x64 PC100 Non-Parity Unbuf DIMM 3.3V SDRAM Standard Simm/Flash Memory Card 168 Pin PC100 Unbuf 3.3V SDRAM And a new CPU Intel Pentium III 600EB SECC2 rather than the Celeron. Any problems with doing this or changes I need to make to the kernal/system to optimize it?? George ===[George R. Kasica]=== +1 262 513 8503 President +1 206 374 6482 FAX Netwrx Consulting Inc. Waukesha, WI USA http://www.netwrx1.com [EMAIL PROTECTED] ICQ #12862186 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
