On Thu 16 May 02:14 PDT 2019, Stanimir Varbanov wrote:
> Hi Bjorn,
>
> On 5/2/19 3:19 AM, Bjorn Andersson wrote:
> > Before introducing the QCS404 platform, which uses the same PCIe
> > controller as IPQ4019, migrate this to use the bulk clock API, in order
> > to make the error paths slighly cleaner.
> >
> > Acked-by: Stanimir Varbanov <svarba...@mm-sol.com>
> > Reviewed-by: Niklas Cassel <niklas.cas...@linaro.org>
> > Signed-off-by: Bjorn Andersson <bjorn.anders...@linaro.org>
> > ---
> >
> > Changes since v2:
> > - Defined QCOM_PCIE_2_4_0_MAX_CLOCKS
> >
> > drivers/pci/controller/dwc/pcie-qcom.c | 49 ++++++++------------------
> > 1 file changed, 14 insertions(+), 35 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c
> > b/drivers/pci/controller/dwc/pcie-qcom.c
> > index 0ed235d560e3..d740cbe0e56d 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > @@ -112,10 +112,10 @@ struct qcom_pcie_resources_2_3_2 {
> > struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
> > };
> >
> > +#define QCOM_PCIE_2_4_0_MAX_CLOCKS 3
> > struct qcom_pcie_resources_2_4_0 {
> > - struct clk *aux_clk;
> > - struct clk *master_clk;
> > - struct clk *slave_clk;
> > + struct clk_bulk_data clks[QCOM_PCIE_2_4_0_MAX_CLOCKS];
> > + int num_clks;
> > struct reset_control *axi_m_reset;
> > struct reset_control *axi_s_reset;
> > struct reset_control *pipe_reset;
> > @@ -638,18 +638,17 @@ static int qcom_pcie_get_resources_2_4_0(struct
> > qcom_pcie *pcie)
> > struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
> > struct dw_pcie *pci = pcie->pci;
> > struct device *dev = pci->dev;
> > + int ret;
> >
> > - res->aux_clk = devm_clk_get(dev, "aux");
> > - if (IS_ERR(res->aux_clk))
> > - return PTR_ERR(res->aux_clk);
> > + res->clks[0].id = "aux";
> > + res->clks[1].id = "master_bus";
> > + res->clks[2].id = "slave_bus";
> >
> > - res->master_clk = devm_clk_get(dev, "master_bus");
> > - if (IS_ERR(res->master_clk))
> > - return PTR_ERR(res->master_clk);
> > + res->num_clks = 3;
>
> Use the new fresh define QCOM_PCIE_2_4_0_MAX_CLOCKS?
>
As I replace it in patch 3/3 with a value different from "max clocks", I
don't think it makes sense to use the define here. So I'm leaving this
as is.
> >
> > - res->slave_clk = devm_clk_get(dev, "slave_bus");
> > - if (IS_ERR(res->slave_clk))
> > - return PTR_ERR(res->slave_clk);
> > + ret = devm_clk_bulk_get(dev, res->num_clks, res->clks);
> > + if (ret < 0)
> > + return ret;
> >
> > res->axi_m_reset = devm_reset_control_get_exclusive(dev, "axi_m");
> > if (IS_ERR(res->axi_m_reset))
> > @@ -719,9 +718,7 @@ static void qcom_pcie_deinit_2_4_0(struct qcom_pcie
> > *pcie)
> > reset_control_assert(res->axi_m_sticky_reset);
> > reset_control_assert(res->pwr_reset);
> > reset_control_assert(res->ahb_reset);
> > - clk_disable_unprepare(res->aux_clk);
> > - clk_disable_unprepare(res->master_clk);
> > - clk_disable_unprepare(res->slave_clk);
> > + clk_bulk_disable_unprepare(res->num_clks, res->clks);
> > }
> >
> > static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
> > @@ -850,23 +847,9 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
> >
> > usleep_range(10000, 12000);
> >
> > - ret = clk_prepare_enable(res->aux_clk);
> > - if (ret) {
> > - dev_err(dev, "cannot prepare/enable iface clock\n");
> > + ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
> > + if (ret)
> > goto err_clk_aux;
>
> Maybe you have to change the name of the label too?
>
Updated this and posted v5. Should be good to be merged now.
Thanks for your reviews!
Regards,
Bjorn
