Both rev C and rev B of the board come with two QSPI-NOR chips
attached to the SoC. Add DT code describing all of this.
Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
Cc: Shawn Guo <shawn...@kernel.org>
Cc: Chris Healy <cphe...@gmail.com>
Cc: Andrew Lunn <and...@lunn.ch>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
Changes since [v1]:
- Small spelling fixes in comment block
[v1] lore.kernel.org/r/20190513035909.30460-2-andrew.smir...@gmail.com
arch/arm/boot/dts/vf610-zii-dev.dtsi | 48 ++++++++++++++++++++++++----
1 file changed, 42 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi
b/arch/arm/boot/dts/vf610-zii-dev.dtsi
index 1f2e65ae2bd6..a1b4ccee2a10 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -177,6 +177,36 @@
status = "okay";
};
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+ status = "okay";
+
+ /*
+ * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR
+ * modes, so, spi-max-frequency is limited to 90MHz
+ */
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <90000000>;
+ spi-rx-bus-width = <4>;
+ reg = <0>;
+ m25p,fast-read;
+ };
+
+ flash@2 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <90000000>;
+ spi-rx-bus-width = <4>;
+ reg = <2>;
+ m25p,fast-read;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
@@ -360,12 +390,18 @@
pinctrl_qspi0: qspi0grp {
fsl,pins = <
- VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
- VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
- VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
- VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
- VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
- VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
+ VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2
+ VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2
+ VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3
+ VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3
+ VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3
+ VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2
+ VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3
+ VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3
>;
};
--
2.21.0
