On Tue, 7 May 2019 16:36:15 +0200
Philippe Schenker <d...@pschenker.ch> wrote:
> From: Philippe Schenker <philippe.schen...@toradex.com>
>
> Clear any interrupt that still is on the device on every channel
> this driver is activated for in probe and specific channels in
> the timeout handler.
>
> Signed-off-by: Philippe Schenker <philippe.schen...@toradex.com>
I'm never particularly clean on blanket resets as they do tend to
hide bugs. However, the probe one is something that would happen anyway
if there was a 'reset' function.
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
>
> ---
>
> drivers/iio/adc/stmpe-adc.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
> index cc752a47444c..a5990e9f2c80 100644
> --- a/drivers/iio/adc/stmpe-adc.c
> +++ b/drivers/iio/adc/stmpe-adc.c
> @@ -80,6 +80,8 @@ static int stmpe_read_voltage(struct stmpe_adc *info,
> ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT);
>
> if (ret <= 0) {
> + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA,
> + STMPE_ADC_CH(info->channel));
> mutex_unlock(&info->lock);
> return -ETIMEDOUT;
> }
> @@ -326,6 +328,9 @@ static int stmpe_adc_probe(struct platform_device *pdev)
> stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN,
> ~(norequest_mask & 0xFF));
>
> + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA,
> + ~(norequest_mask & 0xFF));
> +
> return devm_iio_device_register(&pdev->dev, indio_dev);
> }
>
