From: Jeff Kletsky <git-comm...@allycomm.com>

The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices
and, while it has the same logical layout as the E-series devices,
it differs in the SPI interfacing in significant ways.

To accommodate these changes, this patch also:

  * Adds support for two-byte manufacturer IDs
  * Adds #define-s for three-byte addressing for read ops

http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/

Signed-off-by: Jeff Kletsky <git-comm...@allycomm.com>
---
 drivers/mtd/nand/spi/core.c       |  2 +-
 drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++++++++--------
 include/linux/mtd/spinand.h       | 34 ++++++++++++++++-
 3 files changed, 97 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index fa87ae28cdfe..a13154785dad 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -853,7 +853,7 @@ spinand_select_op_variant(struct spinand_device *spinand,
  */
 int spinand_match_and_init(struct spinand_device *spinand,
                           const struct spinand_info *table,
-                          unsigned int table_size, u8 devid)
+                          unsigned int table_size, u16 devid)
 {
        struct nand_device *nand = spinand_to_nand(spinand);
        unsigned int i;
diff --git a/drivers/mtd/nand/spi/gigadevice.c 
b/drivers/mtd/nand/spi/gigadevice.c
index 0b49d8264bef..d6497ac4c5d8 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -9,11 +9,17 @@
 #include <linux/mtd/spinand.h>
 
 #define SPINAND_MFR_GIGADEVICE                 0xC8
+
 #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS     (1 << 4)
 #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS       (3 << 4)
 
 #define GD5FXGQ4UEXXG_REG_STATUS2              0xf0
 
+#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK         (7 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS  (0 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS (1 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR  (7 << 4)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
                SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
                SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
                SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
                SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
 
+static SPINAND_OP_VARIANTS(read_cache_variants_f,
+               SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+               SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
+               SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+               SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
+               SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
+               SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
+
 static SPINAND_OP_VARIANTS(write_cache_variants,
                SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
                SPINAND_PROG_LOAD(true, 0, NULL, 0));
@@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, 
int section,
        return 0;
 }
 
+static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
+       .ecc = gd5fxgq4xa_ooblayout_ecc,
+       .free = gd5fxgq4xa_ooblayout_free,
+};
+
 static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
                                         u8 status)
 {
@@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device 
*spinand,
        return -EINVAL;
 }
 
-static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
                                       struct mtd_oob_region *region)
 {
        if (section)
@@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, 
int section,
        return 0;
 }
 
-static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
                                        struct mtd_oob_region *region)
 {
        if (section)
@@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info 
*mtd, int section,
        return 0;
 }
 
+static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
+       .ecc = gd5fxgq4_variant2_ooblayout_ecc,
+       .free = gd5fxgq4_variant2_ooblayout_free,
+};
+
 static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
                                        u8 status)
 {
@@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(struct 
spinand_device *spinand,
        return -EINVAL;
 }
 
-static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
-       .ecc = gd5fxgq4xa_ooblayout_ecc,
-       .free = gd5fxgq4xa_ooblayout_free,
-};
+static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
+                                       u8 status)
+{
+       switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
+       case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
+               return 0;
 
-static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
-       .ecc = gd5fxgq4uexxg_ooblayout_ecc,
-       .free = gd5fxgq4uexxg_ooblayout_free,
-};
+       case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
+               return 3;
+
+       case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
+               return -EBADMSG;
+
+       default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
+               return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
+       }
+
+       return -EINVAL;
+}
 
 static const struct spinand_info gigadevice_spinand_table[] = {
        SPINAND_INFO("GD5F1GQ4xA", 0xF1,
@@ -195,25 +229,40 @@ static const struct spinand_info 
gigadevice_spinand_table[] = {
                                              &write_cache_variants,
                                              &update_cache_variants),
                     0,
-                    SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
+                    SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
                                     gd5fxgq4uexxg_ecc_get_status)),
+       SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
+                    NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+                    NAND_ECCREQ(8, 512),
+                    SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
+                                             &write_cache_variants,
+                                             &update_cache_variants),
+                    0,
+                    SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+                                    gd5fxgq4ufxxg_ecc_get_status)),
 };
 
 static int gigadevice_spinand_detect(struct spinand_device *spinand)
 {
        u8 *id = spinand->id.data;
+       u16 did;
        int ret;
 
        /*
-        * For GD NANDs, There is an address byte needed to shift in before IDs
-        * are read out, so the first byte in raw_id is dummy.
+        * Earlier GDF5-series devices (A,E) return [0][MID][DID]
+        * Later (F) devices return [MID][DID1][DID2]
         */
-       if (id[1] != SPINAND_MFR_GIGADEVICE)
+
+       if (id[0] == SPINAND_MFR_GIGADEVICE)
+               did = (id[1] << 8) + id[2];
+       else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
+               did = id[2];
+       else
                return 0;
 
        ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
                                     ARRAY_SIZE(gigadevice_spinand_table),
-                                    id[2]);
+                                    did);
        if (ret)
                return ret;
 
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index b92e2aa955b6..8901ba272538 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -68,30 +68,60 @@
                   SPI_MEM_OP_DUMMY(ndummy, 1),                         \
                   SPI_MEM_OP_DATA_IN(len, buf, 1))
 
+#define SPINAND_PAGE_READ_FROM_CACHE_OP_3A(fast, addr, ndummy, buf, len) \
+       SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1),               \
+                  SPI_MEM_OP_ADDR(3, addr, 1),                         \
+                  SPI_MEM_OP_DUMMY(ndummy, 1),                         \
+                  SPI_MEM_OP_DATA_IN(len, buf, 1))
+
 #define SPINAND_PAGE_READ_FROM_CACHE_X2_OP(addr, ndummy, buf, len)     \
        SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),                             \
                   SPI_MEM_OP_ADDR(2, addr, 1),                         \
                   SPI_MEM_OP_DUMMY(ndummy, 1),                         \
                   SPI_MEM_OP_DATA_IN(len, buf, 2))
 
+#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(addr, ndummy, buf, len)  \
+       SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),                             \
+                  SPI_MEM_OP_ADDR(3, addr, 1),                         \
+                  SPI_MEM_OP_DUMMY(ndummy, 1),                         \
+                  SPI_MEM_OP_DATA_IN(len, buf, 2))
+
 #define SPINAND_PAGE_READ_FROM_CACHE_X4_OP(addr, ndummy, buf, len)     \
        SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),                             \
                   SPI_MEM_OP_ADDR(2, addr, 1),                         \
                   SPI_MEM_OP_DUMMY(ndummy, 1),                         \
                   SPI_MEM_OP_DATA_IN(len, buf, 4))
 
+#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(addr, ndummy, buf, len)  \
+       SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),                             \
+                  SPI_MEM_OP_ADDR(3, addr, 1),                         \
+                  SPI_MEM_OP_DUMMY(ndummy, 1),                         \
+                  SPI_MEM_OP_DATA_IN(len, buf, 4))
+
 #define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(addr, ndummy, buf, len) \
        SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),                             \
                   SPI_MEM_OP_ADDR(2, addr, 2),                         \
                   SPI_MEM_OP_DUMMY(ndummy, 2),                         \
                   SPI_MEM_OP_DATA_IN(len, buf, 2))
 
+#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP_3A(addr, ndummy, buf, len) \
+       SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),                             \
+                  SPI_MEM_OP_ADDR(3, addr, 2),                         \
+                  SPI_MEM_OP_DUMMY(ndummy, 2),                         \
+                  SPI_MEM_OP_DATA_IN(len, buf, 2))
+
 #define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(addr, ndummy, buf, len) \
        SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),                             \
                   SPI_MEM_OP_ADDR(2, addr, 4),                         \
                   SPI_MEM_OP_DUMMY(ndummy, 4),                         \
                   SPI_MEM_OP_DATA_IN(len, buf, 4))
 
+#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP_3A(addr, ndummy, buf, len) \
+       SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),                             \
+                  SPI_MEM_OP_ADDR(3, addr, 4),                         \
+                  SPI_MEM_OP_DUMMY(ndummy, 4),                         \
+                  SPI_MEM_OP_DATA_IN(len, buf, 4))
+
 #define SPINAND_PROG_EXEC_OP(addr)                                     \
        SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1),                             \
                   SPI_MEM_OP_ADDR(3, addr, 1),                         \
@@ -260,7 +290,7 @@ struct spinand_ecc_info {
  */
 struct spinand_info {
        const char *model;
-       u8 devid;
+       u16 devid;
        u32 flags;
        struct nand_memory_organization memorg;
        struct nand_ecc_req eccreq;
@@ -415,7 +445,7 @@ static inline void spinand_set_of_node(struct 
spinand_device *spinand,
 
 int spinand_match_and_init(struct spinand_device *dev,
                           const struct spinand_info *table,
-                          unsigned int table_size, u8 devid);
+                          unsigned int table_size, u16 devid);
 
 int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
 int spinand_select_target(struct spinand_device *spinand, unsigned int target);
-- 
2.11.0

Reply via email to