The DPS310 supports measurement of pressure, so support that in the
driver. Use background measurement like the temperature sensing and
default to lowest precision and lowest measurement rate.
Signed-off-by: Eddie James <eaja...@linux.ibm.com>
---
drivers/iio/pressure/dps310.c | 327 ++++++++++++++++++++++++++++++++++++++----
1 file changed, 301 insertions(+), 26 deletions(-)
diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c
index 3e03685..fe88480 100644
--- a/drivers/iio/pressure/dps310.c
+++ b/drivers/iio/pressure/dps310.c
@@ -16,6 +16,7 @@
*/
#include <linux/i2c.h>
+#include <linux/math64.h>
#include <linux/module.h>
#include <linux/regmap.h>
@@ -29,6 +30,8 @@
#define DPS310_TMP_B1 0x04
#define DPS310_TMP_B2 0x05
#define DPS310_PRS_CFG 0x06
+#define DPS310_PRS_RATE_BITS GENMASK(6, 4)
+#define DPS310_PRS_PRC_BITS GENMASK(3, 0)
#define DPS310_TMP_CFG 0x07
#define DPS310_TMP_RATE_BITS GENMASK(6, 4)
#define DPS310_TMP_PRC_BITS GENMASK(3, 0)
@@ -51,6 +54,7 @@
#define DPS310_RESET 0x0c
#define DPS310_RESET_MAGIC (BIT(0) | BIT(3))
#define DPS310_COEF_BASE 0x10
+#define DPS310_NUM_COEF_REGS 0x12
#define DPS310_PRS_BASE DPS310_PRS_B0
#define DPS310_TMP_BASE DPS310_TMP_B0
@@ -58,7 +62,7 @@
#define DPS310_CALC_RATE(_n) ilog2(_n)
#define DPS310_CALC_PRC(_n) ilog2(_n)
-const int scale_factor[] = {
+static const int scale_factor[] = {
524288,
1572864,
3670016,
@@ -74,6 +78,8 @@ struct dps310_data {
struct regmap *regmap;
s32 c0, c1;
+ s32 c00, c10, c20, c30, c01, c11, c21;
+ s32 pressure_raw;
s32 temp_raw;
};
@@ -86,33 +92,81 @@ static const struct iio_chan_spec dps310_channels[] = {
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_RAW),
},
+ {
+ .type = IIO_PRESSURE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_RAW),
+ },
};
-/* To be called after checking the TMP_RDY bit in MEAS_CFG */
-static int dps310_get_temp_coef(struct dps310_data *data)
+/* To be called after checking the COEF_RDY bit in MEAS_CFG */
+static int dps310_get_coefs(struct dps310_data *data)
{
struct regmap *regmap = data->regmap;
- u8 coef[3] = {0};
+
int r;
+ u8 coef[DPS310_NUM_COEF_REGS] = {0};
u32 c0, c1;
+ u32 c00, c10, c20, c30, c01, c11, c21;
- /*
- * Read temperature calibration coefficients c0 and c1 from the
- * COEF register. The numbers are 12-bit 2's compliment numbers
- */
- r = regmap_bulk_read(regmap, DPS310_COEF_BASE, coef, 3);
+ /* Read all sensor calibration coefficients from the COEF registers. */
+ r = regmap_bulk_read(regmap, DPS310_COEF_BASE, coef,
+ DPS310_NUM_COEF_REGS);
if (r < 0)
return r;
+ /*
+ * Calculate temperature calibration coefficients c0 and c1. The numbers
+ * are 12-bit 2's complement numbers.
+ */
c0 = (coef[0] << 4) | (coef[1] >> 4);
data->c0 = sign_extend32(c0, 11);
c1 = ((coef[1] & GENMASK(3, 0)) << 8) | coef[2];
data->c1 = sign_extend32(c1, 11);
+ /*
+ * Calculate pressure calibration coefficients. c00 and c10 are 20 bit
+ * 2's complement numbers, while the rest are 16 bit 2's complement
+ * numbers.
+ */
+ c00 = (coef[3] << 12) | (coef[4] << 4) | (coef[5] >> 4);
+ data->c00 = sign_extend32(c00, 19);
+
+ c10 = ((coef[5] & GENMASK(3, 0)) << 16) | (coef[6] << 8) | coef[7];
+ data->c10 = sign_extend32(c10, 19);
+
+ c01 = (coef[8] << 8) | coef[9];
+ data->c01 = sign_extend32(c01, 15);
+
+ c11 = (coef[10] << 8) | coef[11];
+ data->c11 = sign_extend32(c11, 15);
+
+ c20 = (coef[12] << 8) | coef[13];
+ data->c20 = sign_extend32(c20, 15);
+
+ c21 = (coef[14] << 8) | coef[15];
+ data->c21 = sign_extend32(c21, 15);
+
+ c30 = (coef[16] << 8) | coef[17];
+ data->c30 = sign_extend32(c30, 15);
+
return 0;
}
+static int dps310_get_pres_precision(struct dps310_data *data)
+{
+ int val, r;
+
+ r = regmap_read(data->regmap, DPS310_PRS_CFG, &val);
+ if (r < 0)
+ return r;
+
+ return BIT(val & GENMASK(2, 0));
+}
+
static int dps310_get_temp_precision(struct dps310_data *data)
{
int val, r;
@@ -128,6 +182,24 @@ static int dps310_get_temp_precision(struct dps310_data
*data)
return BIT(val & GENMASK(2, 0));
}
+static int dps310_set_pres_precision(struct dps310_data *data, int val)
+{
+ int ret;
+ u8 shift_en;
+
+ if (val < 0 || val > 128)
+ return -EINVAL;
+
+ shift_en = val >= 16 ? DPS310_PRS_SHIFT_EN : 0;
+ ret = regmap_write_bits(data->regmap, DPS310_CFG_REG,
+ DPS310_PRS_SHIFT_EN, shift_en);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(data->regmap, DPS310_PRS_CFG,
+ DPS310_PRS_PRC_BITS, DPS310_CALC_PRC(val));
+}
+
static int dps310_set_temp_precision(struct dps310_data *data, int val)
{
int ret;
@@ -146,6 +218,19 @@ static int dps310_set_temp_precision(struct dps310_data
*data, int val)
DPS310_TMP_PRC_BITS, DPS310_CALC_PRC(val));
}
+static int dps310_set_pres_samp_freq(struct dps310_data *data, int freq)
+{
+ u8 val;
+
+ if (freq < 0 || freq > 128)
+ return -EINVAL;
+
+ val = DPS310_CALC_RATE(freq) << 4;
+
+ return regmap_update_bits(data->regmap, DPS310_PRS_CFG,
+ DPS310_PRS_RATE_BITS, val);
+}
+
static int dps310_set_temp_samp_freq(struct dps310_data *data, int freq)
{
u8 val;
@@ -159,6 +244,17 @@ static int dps310_set_temp_samp_freq(struct dps310_data
*data, int freq)
DPS310_TMP_RATE_BITS, val);
}
+static int dps310_get_pres_samp_freq(struct dps310_data *data)
+{
+ int val, r;
+
+ r = regmap_read(data->regmap, DPS310_PRS_CFG, &val);
+ if (r < 0)
+ return r;
+
+ return BIT((val & DPS310_PRS_RATE_BITS) >> 4);
+}
+
static int dps310_get_temp_samp_freq(struct dps310_data *data)
{
int val, r;
@@ -170,6 +266,16 @@ static int dps310_get_temp_samp_freq(struct dps310_data
*data)
return BIT((val & DPS310_TMP_RATE_BITS) >> 4);
}
+static int dps310_get_pres_k(struct dps310_data *data)
+{
+ int r = dps310_get_pres_precision(data);
+
+ if (r < 0)
+ return r;
+
+ return scale_factor[DPS310_CALC_PRC(r)];
+}
+
static int dps310_get_temp_k(struct dps310_data *data)
{
int r = dps310_get_temp_precision(data);
@@ -180,7 +286,33 @@ static int dps310_get_temp_k(struct dps310_data *data)
return scale_factor[DPS310_CALC_PRC(r)];
}
-static int dps310_read_temp(struct dps310_data *data)
+static int dps310_read_pres_raw(struct dps310_data *data)
+{
+ struct device *dev = &data->client->dev;
+ int r, ready;
+ u8 val[3];
+ s32 raw;
+
+ r = regmap_read(data->regmap, DPS310_MEAS_CFG, &ready);
+ if (r < 0)
+ return r;
+
+ if (!(ready & DPS310_PRS_RDY)) {
+ dev_dbg(dev, "pressure not ready\n");
+ return -EAGAIN;
+ }
+
+ r = regmap_bulk_read(data->regmap, DPS310_PRS_BASE, val, 3);
+ if (r < 0)
+ return r;
+
+ raw = (val[0] << 16) | (val[1] << 8) | val[2];
+ data->pressure_raw = sign_extend32(raw, 23);
+
+ return 0;
+}
+
+static int dps310_read_temp_raw(struct dps310_data *data)
{
struct device *dev = &data->client->dev;
struct regmap *regmap = data->regmap;
@@ -246,26 +378,139 @@ static int dps310_write_raw(struct iio_dev *iio,
{
struct dps310_data *data = iio_priv(iio);
- if (chan->type != IIO_TEMP)
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ return dps310_set_pres_samp_freq(data, val);
+
+ case IIO_TEMP:
+ return dps310_set_temp_samp_freq(data, val);
+
+ default:
+ return -EINVAL;
+ }
+
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ return dps310_set_pres_precision(data, val);
+
+ case IIO_TEMP:
+ return dps310_set_temp_precision(data, val);
+
+ default:
+ return -EINVAL;
+ }
+
+ default:
return -EINVAL;
+ }
+}
+
+static int dps310_calculate_pressure(struct dps310_data *data)
+{
+ int i;
+ int kpi = dps310_get_pres_k(data);
+ int kti = dps310_get_temp_k(data);
+ s64 rem = 0ULL;
+ s64 pressure = 0ULL;
+ s64 p;
+ s64 t;
+ s64 denoms[7];
+ s64 nums[7];
+ s64 rems[7];
+ s64 kp;
+ s64 kt;
+
+ if (kpi < 0)
+ return kpi;
+
+ if (kti < 0)
+ return kti;
+
+ kp = (s64)kpi;
+ kt = (s64)kti;
+
+ /* Ignore errors and use the latest temperature */
+ dps310_read_temp_raw(data);
+
+ p = (s64)data->pressure_raw;
+ t = (s64)data->temp_raw;
+
+ /* Section 4.9.1 of the DPS310 spec; algebra'd to avoid underflow */
+ nums[0] = (s64)data->c00;
+ denoms[0] = 1LL;
+ nums[1] = p * (s64)data->c10;
+ denoms[1] = kp;
+ nums[2] = p * p * (s64)data->c20;
+ denoms[2] = kp * kp;
+ nums[3] = p * p * p * (s64)data->c30;
+ denoms[3] = kp * kp * kp;
+ nums[4] = t * (s64)data->c01;
+ denoms[4] = kt;
+ nums[5] = t * p * (s64)data->c11;
+ denoms[5] = kp * kt;
+ nums[6] = t * p * p * (s64)data->c21;
+ denoms[6] = kp * kp * kt;
+
+ /* Kernel lacks a div64_s64_rem function; denoms are all positive */
+ for (i = 0; i < 7; ++i) {
+ u64 rem;
+
+ if (nums[i] < 0LL) {
+ pressure -= div64_u64_rem(-nums[i], denoms[i], &rem);
+ rems[i] = -rem;
+ } else {
+ pressure += div64_u64_rem(nums[i], denoms[i], &rem);
+ rems[i] = (s64)rem;
+ }
+ }
+
+ /* Increase precision and calculate the remainder sum */
+ for (i = 0; i < 7; ++i)
+ rem += div64_s64((s64)rems[i] * 1000000000LL, denoms[i]);
+
+ pressure += div_s64(rem, 1000000000LL);
+
+ return (int)pressure;
+}
+
+static int dps310_read_pressure(struct dps310_data *data, int *val, int *val2,
+ long mask)
+{
+ int ret;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
- return dps310_set_temp_samp_freq(data, val);
+ *val = dps310_get_pres_samp_freq(data);
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_RAW:
+ ret = dps310_read_pres_raw(data);
+ if (ret)
+ return ret;
+
+ *val = dps310_calculate_pressure(data);
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ *val = 1;
+ *val2 = 1000; /* Convert Pa to KPa per IIO ABI */
+ return IIO_VAL_FRACTIONAL;
+
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
- return dps310_set_temp_precision(data, val);
+ *val = dps310_get_pres_precision(data);
+ return IIO_VAL_INT;
+
default:
return -EINVAL;
}
-
- return -EINVAL;
}
-static int dps310_read_raw(struct iio_dev *iio,
- struct iio_chan_spec const *chan,
- int *val, int *val2, long mask)
+static int dps310_read_temp(struct dps310_data *data, int *val, int *val2,
+ long mask)
{
- struct dps310_data *data = iio_priv(iio);
int ret;
switch (mask) {
@@ -274,7 +519,7 @@ static int dps310_read_raw(struct iio_dev *iio,
return IIO_VAL_INT;
case IIO_CHAN_INFO_RAW:
- ret = dps310_read_temp(data);
+ ret = dps310_read_temp_raw(data);
if (ret)
return ret;
@@ -305,8 +550,24 @@ static int dps310_read_raw(struct iio_dev *iio,
default:
return -EINVAL;
}
+}
- return -EINVAL;
+static int dps310_read_raw(struct iio_dev *iio,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct dps310_data *data = iio_priv(iio);
+
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ return dps310_read_pressure(data, val, val2, mask);
+
+ case IIO_TEMP:
+ return dps310_read_temp(data, val, val2, mask);
+
+ default:
+ return -EINVAL;
+ }
}
static const struct regmap_config dps310_regmap_config = {
@@ -390,6 +651,13 @@ static int dps310_probe(struct i2c_client *client,
return PTR_ERR(data->regmap);
/*
+ * Set up pressure sensor in single sample, one measurement per second
+ * mode
+ */
+ r = regmap_write(data->regmap, DPS310_PRS_CFG,
+ DPS310_CALC_RATE(1) | DPS310_CALC_PRC(1));
+
+ /*
* Set up external (MEMS) temperature sensor in single sample, one
* measurement per second mode
*/
@@ -399,16 +667,23 @@ static int dps310_probe(struct i2c_client *client,
if (r < 0)
goto err;
- /* Temp shift is disabled when PRC <= 8 */
+ /* Temp and pressure shifts are disabled when PRC <= 8 */
r = regmap_write_bits(data->regmap, DPS310_CFG_REG,
- DPS310_TMP_SHIFT_EN, 0);
+ DPS310_TMP_SHIFT_EN | DPS310_PRS_SHIFT_EN, 0);
+ if (r < 0)
+ goto err;
+
+ /* MEAS_CFG doesn't seem to update unless first written with 0 */
+ r = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
+ DPS310_MEAS_CTRL_BITS, 0);
if (r < 0)
goto err;
- /* Turn on temperature measurement in the background */
+ /* Turn on temperature and pressure measurement in the background */
r = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
DPS310_MEAS_CTRL_BITS,
- DPS310_TEMP_EN | DPS310_BACKGROUND);
+ DPS310_PRS_EN | DPS310_TEMP_EN |
+ DPS310_BACKGROUND);
if (r < 0)
goto err;
@@ -421,7 +696,7 @@ static int dps310_probe(struct i2c_client *client,
if (r < 0)
goto err;
- r = dps310_get_temp_coef(data);
+ r = dps310_get_coefs(data);
if (r < 0)
goto err;
--
2.7.4
