On 23-04-19, 16:28, Georgi Djakov wrote:
> In addition to frequency and voltage, some devices may have bandwidth
> requirements for their interconnect throughput - for example a CPU
> or GPU may also need to increase or decrease their bandwidth to DDR
> memory based on the current operating performance point.
>
> Extend the OPP tables with additional property to describe the bandwidth
> needs of a device. The average and peak bandwidth values depend on the
> hardware and its properties.
>
> Signed-off-by: Georgi Djakov <georgi.dja...@linaro.org>
> ---
> Documentation/devicetree/bindings/opp/opp.txt | 38 +++++++++++++++++++
> .../devicetree/bindings/property-units.txt | 4 ++
> 2 files changed, 42 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/opp/opp.txt
> b/Documentation/devicetree/bindings/opp/opp.txt
> index 76b6c79604a5..830f0206aea7 100644
> --- a/Documentation/devicetree/bindings/opp/opp.txt
> +++ b/Documentation/devicetree/bindings/opp/opp.txt
> @@ -132,6 +132,9 @@ Optional properties:
> - opp-level: A value representing the performance level of the device,
> expressed as a 32-bit integer.
>
> +- bandwidth-MBps: The interconnect bandwidth is specified with an array
> containing
> + the two integer values for average and peak bandwidth in megabytes per
> second.
> +
> - clock-latency-ns: Specifies the maximum possible transition latency (in
> nanoseconds) for switching to this OPP from any other OPP.
>
> @@ -546,3 +549,38 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>:
> };
> };
> };
> +
> +Example 7: bandwidth-MBps:
> +Average and peak bandwidth values for the interconnects between CPU and DDR
> +memory and also between CPU and L3 are defined per each OPP. Bandwidth of
> both
> +interconnects is scaled together with CPU frequency.
> +
> +/ {
> + cpus {
> + CPU0: cpu@0 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + ...
> + operating-points-v2 = <&cpu_opp_table>;
> + /* path between CPU and DDR memory and CPU and L3 */
> + interconnects = <&noc MASTER_CPU &noc SLAVE_DDR>,
> + <&noc MASTER_CPU &noc SLAVE_L3>;
> + };
> + };
> +
> + cpu_opp_table: cpu_opp_table {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-200000000 {
> + opp-hz = /bits/ 64 <200000000>;
> + /* CPU<->DDR bandwidth: 457 MB/s average, 1525 MB/s
> peak */
> + * CPU<->L3 bandwidth: 914 MB/s average, 3050 MB/s peak
> */
> + bandwidth-MBps = <457 1525>, <914 3050>;
> + };
> + opp-400000000 {
> + opp-hz = /bits/ 64 <400000000>;
> + /* CPU<->DDR bandwidth: 915 MB/s average, 3051 MB/s
> peak */
> + * CPU<->L3 bandwidth: 1828 MB/s average, 6102 MB/s
> peak */
> + bandwidth-MBps = <915 3051>, <1828 6102>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/property-units.txt
> b/Documentation/devicetree/bindings/property-units.txt
> index bfd33734faca..9c3dbefcdae8 100644
> --- a/Documentation/devicetree/bindings/property-units.txt
> +++ b/Documentation/devicetree/bindings/property-units.txt
> @@ -41,3 +41,7 @@ Temperature
> Pressure
> ----------------------------------------
> -kpascal : kiloPascal
> +
> +Throughput
> +----------------------------------------
> +-MBps : megabytes per second
LGTM
--
viresh
