While switching over to the main mesa git repository I was testing kmscube again. On my Meson8m2 board I noticed that two interrupts were correctly set up. This didn't cause any errors so far because on my setup the lima driver is using the "pp_bcast" interrupt instead of ppX and ppmmuX.
While fixing the interrupt lines I also noticed that I accidentally left the switch-delay property in there. That was needed at some point to run the out-of-tree lima kernel driver. It's not required anymore and it's not documented so drop it. Target release: v5.2 (if possible because this is where the lima kernel driver will land). No need to send it for v5.1-rcX because there lima driver won't be part of v5.1. Martin Blumenstingl (2): ARM: dts: meson8: fix GPU interrupts and drop an undocumented property ARM: dts: meson8b: drop undocumented property from the Mali GPU node arch/arm/boot/dts/meson8.dtsi | 5 ++--- arch/arm/boot/dts/meson8b.dtsi | 1 - 2 files changed, 2 insertions(+), 4 deletions(-) -- 2.21.0
