Hello

On 3/13/19 7:32 AM, Dan Murphy wrote:
> Introduce the Texas Instruments LM3532 White LED driver.
> The driver supports ALS configurability or manual brightness
> control.
> 
> The driver also supports associating LED strings with specific
> control banks in a group or as individually controlled strings.
> 

I have a v5 series ready for posting and only the DT was reviewed.

Do we have any comments on the code?

Dan

> Signed-off-by: Dan Murphy <dmur...@ti.com>
> ---
> 
> v4 - Updated code to DT doc changes appending "ti," to TI specific properties 
> -
> https://lore.kernel.org/patchwork/patch/1050124/
> 
> v3 - Removed switch case for register setting in favor of an algorithim (v1 
> comment),
> https://lore.kernel.org/patchwork/patch/1049024/
> v2 - Added look up tables for als_avg, als_imp and ramp times, fixed 
> brightness
> control when ALS is in control, added property value checks to ensure the 
> values
> are not out of bounds - https://lore.kernel.org/patchwork/patch/1048807/
> 
>  drivers/leds/Kconfig       |  10 +
>  drivers/leds/Makefile      |   1 +
>  drivers/leds/leds-lm3532.c | 681 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 692 insertions(+)
>  create mode 100644 drivers/leds/leds-lm3532.c
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index a72f97fca57b..da00b9ed5a5c 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -138,6 +138,16 @@ config LEDS_LM3530
>         controlled manually or using PWM input or using ambient
>         light automatically.
>  
> +config LEDS_LM3532
> +     tristate "LCD Backlight driver for LM3532"
> +     depends on LEDS_CLASS
> +     depends on I2C
> +     help
> +       This option enables support for the LCD backlight using
> +       LM3532 ambient light sensor chip. This ALS chip can be
> +       controlled manually or using PWM input or using ambient
> +       light automatically.
> +
>  config LEDS_LM3533
>       tristate "LED support for LM3533"
>       depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 4c1b0054f379..7a8b1f55d459 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_BD2802)           += leds-bd2802.o
>  obj-$(CONFIG_LEDS_CPCAP)             += leds-cpcap.o
>  obj-$(CONFIG_LEDS_LOCOMO)            += leds-locomo.o
>  obj-$(CONFIG_LEDS_LM3530)            += leds-lm3530.o
> +obj-$(CONFIG_LEDS_LM3532)            += leds-lm3532.o
>  obj-$(CONFIG_LEDS_LM3533)            += leds-lm3533.o
>  obj-$(CONFIG_LEDS_LM3642)            += leds-lm3642.o
>  obj-$(CONFIG_LEDS_MIKROTIK_RB532)    += leds-rb532.o
> diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
> new file mode 100644
> index 000000000000..e8a614d71469
> --- /dev/null
> +++ b/drivers/leds/leds-lm3532.c
> @@ -0,0 +1,681 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// TI LM3532 LED driver
> +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> +
> +#include <linux/i2c.h>
> +#include <linux/leds.h>
> +#include <linux/slab.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/module.h>
> +#include <uapi/linux/uleds.h>
> +#include <linux/gpio/consumer.h>
> +
> +#define LM3532_NAME "lm3532-led"
> +#define LM3532_BL_MODE_MANUAL        0x00
> +#define LM3532_BL_MODE_ALS   0x01
> +
> +#define LM3532_REG_OUTPUT_CFG        0x10
> +#define LM3532_REG_STARTSHUT_RAMP    0x11
> +#define LM3532_REG_RT_RAMP   0x12
> +#define LM3532_REG_PWM_A_CFG 0x13
> +#define LM3532_REG_PWM_B_CFG 0x14
> +#define LM3532_REG_PWM_C_CFG 0x15
> +#define LM3532_REG_ZONE_CFG_A        0x16
> +#define LM3532_REG_CTRL_A_BRT        0x17
> +#define LM3532_REG_ZONE_CFG_B        0x18
> +#define LM3532_REG_CTRL_B_BRT        0x19
> +#define LM3532_REG_ZONE_CFG_C        0x1a
> +#define LM3532_REG_CTRL_C_BRT        0x1b
> +#define LM3532_REG_ENABLE    0x1d
> +#define LM3532_ALS_CONFIG    0x23
> +#define LM3532_REG_ZN_0_HI   0x60
> +#define LM3532_REG_ZN_0_LO   0x61
> +#define LM3532_REG_ZN_1_HI   0x62
> +#define LM3532_REG_ZN_1_LO   0x63
> +#define LM3532_REG_ZN_2_HI   0x64
> +#define LM3532_REG_ZN_2_LO   0x65
> +#define LM3532_REG_ZN_3_HI   0x66
> +#define LM3532_REG_ZN_3_LO   0x67
> +#define LM3532_REG_MAX               0x7e
> +
> +/* Contorl Enable */
> +#define LM3532_CTRL_A_ENABLE BIT(0)
> +#define LM3532_CTRL_B_ENABLE BIT(1)
> +#define LM3532_CTRL_C_ENABLE BIT(2)
> +
> +/* PWM Zone Control */
> +#define LM3532_PWM_ZONE_MASK 0x7c
> +#define LM3532_PWM_ZONE_0_EN BIT(2)
> +#define LM3532_PWM_ZONE_1_EN BIT(3)
> +#define LM3532_PWM_ZONE_2_EN BIT(4)
> +#define LM3532_PWM_ZONE_3_EN BIT(5)
> +#define LM3532_PWM_ZONE_4_EN BIT(6)
> +
> +/* Brightness Configuration */
> +#define LM3532_I2C_CTRL              BIT(0)
> +#define LM3532_ALS_CTRL              0
> +#define LM3532_LINEAR_MAP    BIT(1)
> +#define LM3532_ZONE_MASK     (BIT(2) | BIT(3) | BIT(4))
> +#define LM3532_ZONE_0                0
> +#define LM3532_ZONE_1                BIT(2)
> +#define LM3532_ZONE_2                BIT(3)
> +#define LM3532_ZONE_3                (BIT(2) | BIT(3))
> +#define LM3532_ZONE_4                BIT(4)
> +
> +#define LM3532_ENABLE_ALS    BIT(3)
> +#define LM3532_ALS_SEL_SHIFT 6
> +
> +/* Zone Boundary Register */
> +#define LM3532_ALS_WINDOW_mV 2000
> +#define LM3532_ALS_ZB_MAX    4
> +#define LM3532_ALS_OFFSET_mV 2
> +
> +#define LM3532_CONTROL_A     0
> +#define LM3532_CONTROL_B     1
> +#define LM3532_CONTROL_C     2
> +#define LM3532_MAX_CONTROL_BANKS 3
> +#define LM3532_MAX_LED_STRINGS       3
> +
> +#define LM3532_OUTPUT_CFG_MASK       0x3
> +#define LM3532_BRT_VAL_ADJUST        8
> +#define LM3532_RAMP_DOWN_SHIFT       3
> +
> +#define LM3532_NUM_RAMP_VALS 8
> +#define LM3532_NUM_AVG_VALS  8
> +#define LM3532_NUM_IMP_VALS  32
> +
> +/*
> + * struct lm3532_als_data
> + * @config - value of ALS configuration register
> + * @als1_imp_sel - value of ALS1 resistor select register
> + * @als2_imp_sel - value of ALS2 resistor select register
> + * @als_avrg_time - ALS averaging time
> + * @als_input_mode - ALS input mode for brightness control
> + * @als_vmin - Minimum ALS voltage
> + * @als_vmax - Maximum ALS voltage
> + * @zone_lo - values of ALS lo ZB(Zone Boundary) registers
> + * @zone_hi - values of ALS hi ZB(Zone Boundary) registers
> + */
> +struct lm3532_als_data {
> +     u8 config;
> +     u8 als1_imp_sel;
> +     u8 als2_imp_sel;
> +     u8 als_avrg_time;
> +     u8 als_input_mode;
> +     u32 als_vmin;
> +     u32 als_vmax;
> +     u8 zones_lo[LM3532_ALS_ZB_MAX];
> +     u8 zones_hi[LM3532_ALS_ZB_MAX];
> +};
> +
> +/**
> + * struct lm3532_led
> + * @led_dev: led class device
> + * @priv - Pointer the device data structure
> + * @control_bank - Control bank the LED is associated to
> + * @mode - Mode of the LED string
> + * @num_leds - Number of LED strings are supported in this array
> + * @led_strings - The LED strings supported in this array
> + * @label - LED label
> + */
> +struct lm3532_led {
> +     struct led_classdev led_dev;
> +     struct lm3532_data *priv;
> +
> +     int control_bank;
> +     int mode;
> +     int num_leds;
> +     u32 led_strings[LM3532_MAX_CONTROL_BANKS];
> +     char label[LED_MAX_NAME_SIZE];
> +};
> +
> +/**
> + * struct lm3532_data
> + * @enable_gpio - Hardware enable gpio
> + * @regulator: regulator
> + * @client: i2c client
> + * @regmap - Devices register map
> + * @dev - Pointer to the devices device struct
> + * @lock - Lock for reading/writing the device
> + * @als_data - Pointer to the als data struct
> + * @runtime_ramp_up - Runtime ramp up setting
> + * @runtime_ramp_down - Runtime ramp down setting
> + * @leds - Array of LED strings
> + */
> +struct lm3532_data {
> +     struct gpio_desc *enable_gpio;
> +     struct regulator *regulator;
> +     struct i2c_client *client;
> +     struct regmap *regmap;
> +     struct device *dev;
> +     struct mutex lock;
> +
> +     struct lm3532_als_data *als_data;
> +
> +     u32 runtime_ramp_up;
> +     u32 runtime_ramp_down;
> +
> +     struct lm3532_led leds[];
> +};
> +
> +static const struct reg_default lm3532_reg_defs[] = {
> +     {LM3532_REG_OUTPUT_CFG, 0xe4},
> +     {LM3532_REG_STARTSHUT_RAMP, 0xc0},
> +     {LM3532_REG_RT_RAMP, 0xc0},
> +     {LM3532_REG_PWM_A_CFG, 0x82},
> +     {LM3532_REG_PWM_B_CFG, 0x82},
> +     {LM3532_REG_PWM_C_CFG, 0x82},
> +     {LM3532_REG_ZONE_CFG_A, 0xf1},
> +     {LM3532_REG_CTRL_A_BRT, 0xf3},
> +     {LM3532_REG_ZONE_CFG_B, 0xf1},
> +     {LM3532_REG_CTRL_B_BRT, 0xf3},
> +     {LM3532_REG_ZONE_CFG_C, 0xf1},
> +     {LM3532_REG_CTRL_C_BRT, 0xf3},
> +     {LM3532_REG_ENABLE, 0xf8},
> +     {LM3532_ALS_CONFIG, 0x44},
> +     {LM3532_REG_ZN_0_HI, 0x35},
> +     {LM3532_REG_ZN_0_LO, 0x33},
> +     {LM3532_REG_ZN_1_HI, 0x6a},
> +     {LM3532_REG_ZN_1_LO, 0x66},
> +     {LM3532_REG_ZN_2_HI, 0xa1},
> +     {LM3532_REG_ZN_2_LO, 0x99},
> +     {LM3532_REG_ZN_3_HI, 0xdc},
> +     {LM3532_REG_ZN_3_LO, 0xcc},
> +};
> +
> +static const struct regmap_config lm3532_regmap_config = {
> +     .reg_bits = 8,
> +     .val_bits = 8,
> +
> +     .max_register = LM3532_REG_MAX,
> +     .reg_defaults = lm3532_reg_defs,
> +     .num_reg_defaults = ARRAY_SIZE(lm3532_reg_defs),
> +     .cache_type = REGCACHE_FLAT,
> +};
> +
> +const static int als_imp_table[LM3532_NUM_IMP_VALS] = {37000, 18500, 12330,
> +                                                    92500, 7400, 6170, 5290,
> +                                                    4630, 4110, 3700, 3360,
> +                                                    3080, 2850, 2640, 2440,
> +                                                    2310, 2180, 2060, 1950,
> +                                                    1850, 1760, 1680, 1610,
> +                                                    1540, 1480, 1420, 1370,
> +                                                    1320, 1280, 1230, 1190};
> +static int lm3532_get_als_imp_index(int als_imped)
> +{
> +     int i;
> +
> +     if (als_imped > als_imp_table[1])
> +             return 0;
> +
> +     if (als_imped < als_imp_table[LM3532_NUM_IMP_VALS - 1])
> +             return LM3532_NUM_IMP_VALS - 1;
> +
> +     for (i = 1; i < LM3532_NUM_IMP_VALS; i++) {
> +             if (als_imped == als_imp_table[i])
> +                     return i;
> +
> +             /* Find an approximate index by looking up the table */
> +             if (als_imped < als_imp_table[i - 1] &&
> +                 als_imped > als_imp_table[i]) {
> +                     if (als_imped - als_imp_table[i - 1] <
> +                         als_imp_table[i] - als_imped)
> +                             return i + 1;
> +                     else
> +                             return i;
> +             }
> +     }
> +
> +     return -EINVAL;
> +}
> +
> +static int lm3532_get_index(const int table[], int size, int value)
> +{
> +     int i;
> +
> +     for (i = 1; i < size; i++) {
> +             if (value == table[i])
> +                     return i;
> +
> +             /* Find an approximate index by looking up the table */
> +             if (value > table[i - 1] &&
> +                 value < table[i]) {
> +                     if (value - table[i - 1] < table[i] - value)
> +                             return i - 1;
> +                     else
> +                             return i;
> +             }
> +     }
> +
> +     return -EINVAL;
> +}
> +
> +const static int als_avrg_table[LM3532_NUM_AVG_VALS] = {17920, 35840, 71680,
> +                                                     1433360, 286720, 573440,
> +                                                     1146880, 2293760};
> +static int lm3532_get_als_avg_index(int avg_time)
> +{
> +     if (avg_time <= als_avrg_table[0])
> +             return 0;
> +
> +     if (avg_time > als_avrg_table[LM3532_NUM_AVG_VALS - 1])
> +             return LM3532_NUM_AVG_VALS - 1;
> +
> +     return lm3532_get_index(&als_avrg_table[0], LM3532_NUM_AVG_VALS,
> +                             avg_time);
> +}
> +
> +const static int ramp_table[LM3532_NUM_RAMP_VALS] = { 8, 1024, 2048, 4096, 
> 8192,
> +                                                  16384, 32768, 65536};
> +static int lm3532_get_ramp_index(int ramp_time)
> +{
> +     if (ramp_time <= ramp_table[0])
> +             return 0;
> +
> +     if (ramp_time > ramp_table[LM3532_NUM_RAMP_VALS - 1])
> +             return LM3532_NUM_RAMP_VALS - 1;
> +
> +     return lm3532_get_index(&ramp_table[0], LM3532_NUM_RAMP_VALS,
> +                             ramp_time);
> +}
> +
> +static int lm3532_led_enable(struct lm3532_led *led_data)
> +{
> +     int ctrl_en_val = BIT(led_data->control_bank);
> +     int ret;
> +
> +     ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
> +                                      ctrl_en_val, ctrl_en_val);
> +     if (ret) {
> +             dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
> +             return ret;
> +     }
> +
> +     return regulator_enable(led_data->priv->regulator);
> +}
> +
> +static int lm3532_led_disable(struct lm3532_led *led_data)
> +{
> +     int ctrl_en_val = BIT(led_data->control_bank);
> +     int ret;
> +
> +     ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
> +                                      ctrl_en_val, ~ctrl_en_val);
> +     if (ret) {
> +             dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
> +             return ret;
> +     }
> +
> +     return regulator_disable(led_data->priv->regulator);
> +}
> +
> +static int lm3532_brightness_set(struct led_classdev *led_cdev,
> +                              enum led_brightness brt_val)
> +{
> +     struct lm3532_led *led =
> +                     container_of(led_cdev, struct lm3532_led, led_dev);
> +     u8 brightness_reg;
> +     int ret;
> +
> +     mutex_lock(&led->priv->lock);
> +
> +     if (led->mode == LM3532_BL_MODE_ALS) {
> +             if (brt_val > LED_OFF)
> +                     ret = lm3532_led_enable(led);
> +             else
> +                     ret = lm3532_led_disable(led);
> +
> +             goto unlock;
> +     }
> +
> +     if (brt_val == LED_OFF) {
> +             ret = lm3532_led_disable(led);
> +             goto unlock;
> +     }
> +
> +     ret = lm3532_led_enable(led);
> +     if (ret)
> +             goto unlock;
> +
> +     brightness_reg = LM3532_REG_CTRL_A_BRT + led->control_bank * 2;
> +     brt_val = brt_val / LM3532_BRT_VAL_ADJUST;
> +
> +     ret = regmap_write(led->priv->regmap, brightness_reg, brt_val);
> +
> +unlock:
> +     mutex_unlock(&led->priv->lock);
> +     return ret;
> +}
> +
> +static int lm3532_init_registers(struct lm3532_led *led)
> +{
> +     struct lm3532_data *drvdata = led->priv;
> +     unsigned int runtime_ramp_val;
> +     unsigned int output_cfg_val = 0;
> +     unsigned int output_cfg_shift = 0;
> +     unsigned int output_cfg_mask = 0;
> +     int ret, i;
> +
> +     for (i = 0; i < led->num_leds; i++) {
> +             output_cfg_shift = led->led_strings[i] * 2;
> +             output_cfg_val |= (led->control_bank << output_cfg_shift);
> +             output_cfg_mask |= LM3532_OUTPUT_CFG_MASK << output_cfg_shift;
> +     }
> +
> +     ret = regmap_update_bits(drvdata->regmap, LM3532_REG_OUTPUT_CFG,
> +                              output_cfg_mask, output_cfg_val);
> +     if (ret)
> +             return ret;
> +
> +     runtime_ramp_val = drvdata->runtime_ramp_up |
> +                      (drvdata->runtime_ramp_down << LM3532_RAMP_DOWN_SHIFT);
> +
> +     return regmap_write(drvdata->regmap, LM3532_REG_RT_RAMP,
> +                         runtime_ramp_val);
> +}
> +
> +static int lm3532_als_configure(struct lm3532_data *priv,
> +                             struct lm3532_led *led)
> +{
> +     struct lm3532_als_data *als = priv->als_data;
> +     u32 als_vmin, als_vmax, als_vstep;
> +     int zone_reg = LM3532_REG_ZN_0_HI;
> +     int brightnes_config_reg;
> +     int ret;
> +     int i;
> +
> +     als_vmin = als->als_vmin;
> +     als_vmax = als->als_vmax;
> +
> +     als_vstep = (als_vmax - als_vmin) / ((LM3532_ALS_ZB_MAX + 1) * 2);
> +
> +     for (i = 0; i < LM3532_ALS_ZB_MAX; i++) {
> +             als->zones_lo[i] = ((als_vmin + als_vstep + (i * als_vstep)) *
> +                             LED_FULL) / 1000;
> +             als->zones_hi[i] = ((als_vmin + LM3532_ALS_OFFSET_mV +
> +                             als_vstep + (i * als_vstep)) * LED_FULL) / 1000;
> +
> +             zone_reg = LM3532_REG_ZN_0_HI + i * 2;
> +             ret = regmap_write(priv->regmap, zone_reg, als->zones_lo[i]);
> +             if (ret)
> +                     return ret;
> +
> +             zone_reg += 1;
> +             ret = regmap_write(priv->regmap, zone_reg, als->zones_hi[i]);
> +             if (ret)
> +                     return ret;
> +     }
> +
> +     als->config = (als->als_avrg_time | (LM3532_ENABLE_ALS) |
> +             (als->als_input_mode << LM3532_ALS_SEL_SHIFT));
> +
> +     ret = regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config);
> +     if (ret)
> +             return ret;
> +
> +     brightnes_config_reg = LM3532_REG_ZONE_CFG_A + led->control_bank * 2;
> +
> +     return regmap_update_bits(priv->regmap, brightnes_config_reg,
> +                               LM3532_I2C_CTRL, LM3532_ALS_CTRL);
> +}
> +
> +static int lm3532_parse_als(struct lm3532_data *priv)
> +{
> +     struct lm3532_als_data *als;
> +     int als_avg_time;
> +     int als_impedance;
> +     int ret;
> +
> +     als = devm_kzalloc(priv->dev, sizeof(*als), GFP_KERNEL);
> +     if (als == NULL)
> +             return -ENOMEM;
> +
> +     ret = device_property_read_u32(&priv->client->dev, "ti,als-vmin",
> +                                    &als->als_vmin);
> +     if (ret)
> +             als->als_vmin = 0;
> +
> +     ret = device_property_read_u32(&priv->client->dev, "ti,als-vmax",
> +                                    &als->als_vmax);
> +     if (ret)
> +             als->als_vmax = LM3532_ALS_WINDOW_mV;
> +
> +     if (als->als_vmax > LM3532_ALS_WINDOW_mV) {
> +             ret = -EINVAL;
> +             return ret;
> +     }
> +
> +     ret = device_property_read_u32(&priv->client->dev, "ti,als1-imp-sel",
> +                                   &als_impedance);
> +     if (ret)
> +             als->als1_imp_sel = 0;
> +     else
> +             als->als1_imp_sel = lm3532_get_als_imp_index(als_impedance);
> +
> +     ret = device_property_read_u32(&priv->client->dev, "ti,als2-imp-sel",
> +                                   &als_impedance);
> +     if (ret)
> +             als->als2_imp_sel = 0;
> +     else
> +             als->als2_imp_sel = lm3532_get_als_imp_index(als_impedance);
> +
> +     ret = device_property_read_u32(&priv->client->dev, 
> "ti,als-avrg-time-us",
> +                                   &als_avg_time);
> +     if (ret)
> +             als->als_avrg_time = 0;
> +     else
> +             als->als_avrg_time = lm3532_get_als_avg_index(als_avg_time);
> +
> +     ret = device_property_read_u8(&priv->client->dev, "ti,als-input-mode",
> +                                   &als->als_input_mode);
> +     if (ret)
> +             als->als_input_mode = 0;
> +
> +     if (als->als_input_mode > LM3532_BL_MODE_ALS) {
> +             ret = -EINVAL;
> +             return ret;
> +     }
> +
> +     priv->als_data = als;
> +
> +     return ret;
> +}
> +
> +static int lm3532_parse_node(struct lm3532_data *priv)
> +{
> +     struct fwnode_handle *child = NULL;
> +     struct lm3532_led *led;
> +     const char *name;
> +     int control_bank;
> +     u32 ramp_time;
> +     size_t i = 0;
> +     int ret;
> +
> +     priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
> +                                                "enable", GPIOD_OUT_LOW);
> +     if (IS_ERR(priv->enable_gpio))
> +             priv->enable_gpio = NULL;
> +
> +     priv->regulator = devm_regulator_get(&priv->client->dev, "vin");
> +     if (IS_ERR(priv->regulator))
> +             priv->regulator = NULL;
> +
> +     ret = device_property_read_u32(&priv->client->dev, "ramp-up-us",
> +                                    &ramp_time);
> +     if (ret)
> +             dev_info(&priv->client->dev, "ramp-up-ms property missing\n");
> +     else
> +             priv->runtime_ramp_up = lm3532_get_ramp_index(ramp_time);
> +
> +     ret = device_property_read_u32(&priv->client->dev, "ramp-down-us",
> +                                    &ramp_time);
> +     if (ret)
> +             dev_info(&priv->client->dev, "ramp-down-ms property missing\n");
> +     else
> +             priv->runtime_ramp_down = lm3532_get_ramp_index(ramp_time);
> +
> +     device_for_each_child_node(priv->dev, child) {
> +             led = &priv->leds[i];
> +
> +             ret = fwnode_property_read_u32(child, "reg", &control_bank);
> +             if (ret) {
> +                     dev_err(&priv->client->dev, "reg property missing\n");
> +                     fwnode_handle_put(child);
> +                     goto child_out;
> +             }
> +
> +             if (control_bank > LM3532_CONTROL_C) {
> +                     dev_err(&priv->client->dev, "Control bank invalid\n");
> +                     continue;
> +             }
> +
> +             led->control_bank = control_bank;
> +
> +             ret = fwnode_property_read_u32(child, "ti,led-mode",
> +                                            &led->mode);
> +             if (ret) {
> +                     dev_err(&priv->client->dev, "ti,led-mode property 
> missing\n");
> +                     fwnode_handle_put(child);
> +                     goto child_out;
> +             }
> +
> +             if (led->mode == LM3532_BL_MODE_ALS) {
> +                     ret = lm3532_parse_als(priv);
> +                     if (ret)
> +                             dev_err(&priv->client->dev, "Failed to parse 
> als\n");
> +                     else
> +                             lm3532_als_configure(priv, led);
> +             }
> +
> +             led->num_leds = fwnode_property_read_u32_array(child,
> +                                                            "led-sources",
> +                                                            NULL, 0);
> +
> +             if (led->num_leds > LM3532_MAX_LED_STRINGS) {
> +                     dev_err(&priv->client->dev, "To many LED string 
> defined\n");
> +                     continue;
> +             }
> +
> +             ret = fwnode_property_read_u32_array(child, "led-sources",
> +                                                 led->led_strings,
> +                                                 led->num_leds);
> +             if (ret) {
> +                     dev_err(&priv->client->dev, "led-sources property 
> missing\n");
> +                     fwnode_handle_put(child);
> +                     goto child_out;
> +             }
> +
> +             fwnode_property_read_string(child, "linux,default-trigger",
> +                                         &led->led_dev.default_trigger);
> +
> +             ret = fwnode_property_read_string(child, "label", &name);
> +             if (ret)
> +                     snprintf(led->label, sizeof(led->label),
> +                             "%s::", priv->client->name);
> +             else
> +                     snprintf(led->label, sizeof(led->label),
> +                              "%s:%s", priv->client->name, name);
> +
> +             led->priv = priv;
> +             led->led_dev.name = led->label;
> +             led->led_dev.brightness_set_blocking = lm3532_brightness_set;
> +
> +             ret = devm_led_classdev_register(priv->dev, &led->led_dev);
> +             if (ret) {
> +                     dev_err(&priv->client->dev, "led register err: %d\n",
> +                             ret);
> +                     fwnode_handle_put(child);
> +                     goto child_out;
> +             }
> +
> +             lm3532_init_registers(led);
> +
> +             i++;
> +     }
> +
> +child_out:
> +     return ret;
> +}
> +
> +static int lm3532_probe(struct i2c_client *client,
> +                        const struct i2c_device_id *id)
> +{
> +     struct lm3532_data *drvdata;
> +     int ret = 0;
> +     int count;
> +
> +     count = device_get_child_node_count(&client->dev);
> +     if (!count) {
> +             dev_err(&client->dev, "LEDs are not defined in device tree!");
> +             return -ENODEV;
> +     }
> +
> +     drvdata = devm_kzalloc(&client->dev, struct_size(drvdata, leds, count),
> +                        GFP_KERNEL);
> +     if (drvdata == NULL)
> +             return -ENOMEM;
> +
> +     drvdata->client = client;
> +     drvdata->dev = &client->dev;
> +
> +     drvdata->regmap = devm_regmap_init_i2c(client, &lm3532_regmap_config);
> +     if (IS_ERR(drvdata->regmap)) {
> +             ret = PTR_ERR(drvdata->regmap);
> +             dev_err(&client->dev, "Failed to allocate register map: %d\n",
> +                     ret);
> +             return ret;
> +     }
> +
> +     mutex_init(&drvdata->lock);
> +     i2c_set_clientdata(client, drvdata);
> +
> +     ret = lm3532_parse_node(drvdata);
> +     if (ret) {
> +             dev_err(&client->dev, "Failed to parse node\n");
> +             return ret;
> +     }
> +
> +     if (drvdata->enable_gpio)
> +             gpiod_direction_output(drvdata->enable_gpio, 1);
> +
> +     return ret;
> +}
> +
> +static int lm3532_remove(struct i2c_client *client)
> +{
> +     struct lm3532_data *drvdata = i2c_get_clientdata(client);
> +
> +     if (drvdata->enable_gpio)
> +             gpiod_direction_output(drvdata->enable_gpio, 0);
> +
> +     return 0;
> +}
> +
> +static const struct of_device_id of_lm3532_leds_match[] = {
> +     { .compatible = "ti,lm3532", },
> +     {},
> +};
> +MODULE_DEVICE_TABLE(of, of_lm3532_leds_match);
> +
> +static const struct i2c_device_id lm3532_id[] = {
> +     {LM3532_NAME, 0},
> +     {}
> +};
> +MODULE_DEVICE_TABLE(i2c, lm3532_id);
> +
> +static struct i2c_driver lm3532_i2c_driver = {
> +     .probe = lm3532_probe,
> +     .remove = lm3532_remove,
> +     .id_table = lm3532_id,
> +     .driver = {
> +             .name = LM3532_NAME,
> +             .of_match_table = of_lm3532_leds_match,
> +     },
> +};
> +module_i2c_driver(lm3532_i2c_driver);
> +
> +MODULE_DESCRIPTION("Back Light driver for LM3532");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Dan Murphy <dmur...@ti.com>");
> 


-- 
------------------
Dan Murphy

Reply via email to