We don't need to fudge the device class in qcom_pcie_rd_own_conf()
because dw_pcie_setup_rc() already does the right thing:
/* Program correct class for RC */
dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
However, the above has no effect on 8064, thus a fixup is required.
Signed-off-by: Marc Gonzalez <marc.w.gonza...@free.fr>
Tested-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
---
Changes from v3 to v4: Define and use DEV_ID_8064 (not in
include/linux/pci_ids.h because not shared)
---
drivers/pci/controller/dwc/pcie-qcom.c | 25 ++++++++-----------------
1 file changed, 8 insertions(+), 17 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c
b/drivers/pci/controller/dwc/pcie-qcom.c
index d185ea5fe996..712a83354f9d 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1129,25 +1129,8 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
return ret;
}
-static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
- u32 *val)
-{
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-
- /* the device class is not reported correctly from the register */
- if (where == PCI_CLASS_REVISION && size == 4) {
- *val = readl(pci->dbi_base + PCI_CLASS_REVISION);
- *val &= 0xff; /* keep revision id */
- *val |= PCI_CLASS_BRIDGE_PCI << 16;
- return PCIBIOS_SUCCESSFUL;
- }
-
- return dw_pcie_read(pci->dbi_base + where, size, val);
-}
-
static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
.host_init = qcom_pcie_host_init,
- .rd_own_conf = qcom_pcie_rd_own_conf,
};
/* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */
@@ -1309,6 +1292,14 @@ static const struct of_device_id qcom_pcie_match[] = {
{ }
};
+#define DEV_ID_8064 0x0101
+
+static void qcom_fixup_class(struct pci_dev *dev)
+{
+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, DEV_ID_8064, qcom_fixup_class);
+
static struct platform_driver qcom_pcie_driver = {
.probe = qcom_pcie_probe,
.driver = {
--
2.17.1
