Hi Dmitry,

Thanks,

On 18 March 2019 16:03, Dmitry Osipenko wrote:

> Subject: Re: [PATCH] regulator: core: fix error path for
> regulator_set_voltage_unlocked
> 
> 18.03.2019 18:32, Steve Twiss пишет:
> > During several error paths in the function
> > regulator_set_voltage_unlocked() the value of 'ret' can take on negative
> > error values. However, in calls that go through the 'goto out' statement,
> > this return value is lost and return 0 is used instead, indicating a
> > 'pass'.
> >
> > There are several cases where this function should legitimately return a
> > fail instead of a pass: one such case includes constraints check during
> > voltage selection in the call to regulator_check_voltage(), which can
> > have -EINVAL for the case when an unsupported voltage is incorrectly
> > requested. In that case, -22 is expected as the return value, not 0.
> >
> > Fixes: 9243a195be7a ("regulator: core: Change voltage setting path")
> > Signed-off-by: Steve Twiss <[email protected]>
> > ---
> >  drivers/regulator/core.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> > index 68473d0..caf8743 100644
> > --- a/drivers/regulator/core.c
> > +++ b/drivers/regulator/core.c
> > @@ -3326,7 +3326,7 @@ static int regulator_set_voltage_unlocked(struct
> regulator *regulator,
> >             goto out2;
> >
> >  out:
> > -   return 0;
> > +   return ret;
> >  out2:
> >     voltage->min_uV = old_min_uV;
> >     voltage->max_uV = old_max_uV;
> >
> 
> Looks like a good catch.
> 
> Probably will be a bit better to write this as:
> 
>         /* for not coupled regulators this will just set the voltage */
>         ret = regulator_balance_voltage(rdev, state);
> -       if (ret < 0)
> -               goto out2;
> -
> +       if (ret < 0) {
> +               voltage->min_uV = old_min_uV;
> +               voltage->max_uV = old_max_uV;
> +       }
>  out:
> -       return 0;
> -out2:
> -       voltage->min_uV = old_min_uV;
> -       voltage->max_uV = old_max_uV;
> -
>         return ret;
>  }

I've just had a very similar conversation with Adam Thomson who sits near me 
and also 
said the two gotos make it look confusing.

Honestly -- I wasn't convinced because it looked obvious to me, but you are the 
second
person to say it .. 
CC: Adam Thomson

So, ok. Agreed. :)
I'll make the change and resend.

Regards,
Steve

Reply via email to