On 13/03/2019 13:04, Matthias Brugger wrote:
>
>
> On 13/03/2019 09:42, ryder....@kernel.org wrote:
>> From: Ryder Lee <ryder....@mediatek.com>
>>
>> This adds basic support for MT7629 reference board.
>>
>> Signed-off-by: Ryder Lee <ryder....@mediatek.com>
>> ---
>> Changes since v1:
>> -Fix unit-address warnings.
>> -Put all the mmio peripherals under a simple-bus node.
>> -Drop all the 'partitions' nodes in flash node.
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/mt7629-rfb.dts | 203 ++++++++++++++++
>> arch/arm/boot/dts/mt7629.dtsi | 370
>> ++++++++++++++++++++++++++++++
>> include/dt-bindings/reset/mt7629-resets.h | 71 ++++++
>> 4 files changed, 645 insertions(+)
>> create mode 100644 arch/arm/boot/dts/mt7629-rfb.dts
>> create mode 100644 arch/arm/boot/dts/mt7629.dtsi
>> create mode 100644 include/dt-bindings/reset/mt7629-resets.h
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index bd40148..a5a6d9f 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -1231,6 +1231,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
>> mt7623a-rfb-nand.dtb \
>> mt7623n-rfb-emmc.dtb \
>> mt7623n-bananapi-bpi-r2.dtb \
>> + mt7629-rfb.dtb \
>> mt8127-moose.dtb \
>> mt8135-evbp1.dtb
>> dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
>> diff --git a/arch/arm/boot/dts/mt7629-rfb.dts
>> b/arch/arm/boot/dts/mt7629-rfb.dts
>> new file mode 100644
>> index 0000000..a47dd7e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/mt7629-rfb.dts
>> @@ -0,0 +1,203 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2019 MediaTek Inc.
>> + * Author: Ryder Lee <ryder....@mediatek.com>
>> + */
>> +
>> +/dts-v1/;
>> +#include <dt-bindings/input/input.h>
>> +#include "mt7629.dtsi"
>> +
>> +/ {
>> + model = "MediaTek MT7629 reference board";
>> + compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + gpio-keys {
>> + compatible = "gpio-keys";
>> +
>> + reset {
>> + label = "factory";
>> + linux,code = <KEY_RESTART>;
>> + gpios = <&pio 60 GPIO_ACTIVE_LOW>;
>> + };
>> +
>> + wps {
>> + label = "wps";
>> + linux,code = <KEY_WPS_BUTTON>;
>> + gpios = <&pio 58 GPIO_ACTIVE_LOW>;
>> + };
>> + };
>> +
>> + memory@40000000 {
>> + device_type = "memory";
>> + reg = <0 0x40000000 0 0x10000000>;
>> + };
>> +
>> + reg_3p3v: regulator-3p3v {
>> + compatible = "regulator-fixed";
>> + regulator-name = "fixed-3.3V";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + reg_5v: regulator-5v {
>> + compatible = "regulator-fixed";
>> + regulator-name = "fixed-5V";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +};
>> +
>> +&i2c {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c_pins>;
>> + status = "okay";
>> +};
>> +
>> +&qspi {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qspi_pins>;
>> + status = "okay";
>> +
>> + flash@0 {
>> + compatible = "jedec,spi-nor";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + };
>> +};
>> +
>> +&pio {
>> + eth_pins: eth-pins {
>> + mux {
>> + function = "eth";
>> + groups = "mdc_mdio";
>> + };
>> + };
>> +
>> + ephy_leds_pins: ephy-leds-pins {
>> + mux {
>> + function = "led";
>> + groups = "gphy_leds_0", "ephy_leds";
>> + };
>> + };
>> +
>> + i2c_pins: i2c-pins {
>> + mux {
>> + function = "i2c";
>> + groups = "i2c_0";
>> + };
>> +
>> + conf {
>> + pins = "I2C_SDA", "I2C_SCL";
>> + drive-strength = <4>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + pcie_pins: pcie-pins {
>> + mux {
>> + function = "pcie";
>> + groups = "pcie_clkreq",
>> + "pcie_pereset",
>> + "pcie_wake";
>> + };
>> + };
>> +
>> + pwm_pins: pwm-pins {
>> + mux {
>> + function = "pwm";
>> + groups = "pwm_0";
>> + };
>> + };
>> +
>> + /* Serial NAND is shared pin with SPI-NOR */
>> + serial_nand_pins: serial-nand-pins {
>> + mux {
>> + function = "flash";
>> + groups = "snfi";
>> + };
>> + };
>> +
>> + spi_pins: spi-pins {
>> + mux {
>> + function = "spi";
>> + groups = "spi_0";
>> + };
>> + };
>> +
>> + /* SPI-NOR is shared pin with serial NAND */
>> + qspi_pins: qspi-pins {
>> + mux {
>> + function = "flash";
>> + groups = "spi_nor";
>> + };
>> + };
>> +
>> + uart0_pins: uart0-pins {
>> + mux {
>> + function = "uart";
>> + groups = "uart0_txd_rxd" ;
>> + };
>> + };
>> +
>> + uart1_pins: uart1-pins {
>> + mux {
>> + function = "uart";
>> + groups = "uart1_0_tx_rx" ;
>> + };
>> + };
>> +
>> + uart2_pins: uart2-pins {
>> + mux {
>> + function = "uart";
>> + groups = "uart2_0_txd_rxd" ;
>> + };
>> + };
>> +
>> + watchdog_pins: watchdog-pins {
>> + mux {
>> + function = "watchdog";
>> + groups = "watchdog";
>> + };
>> + };
>> +};
>> +
>> +&spi {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&spi_pins>;
>> + status = "okay";
>> +};
>> +
>> +&uart0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart0_pins>;
>> + status = "okay";
>> +};
>> +
>> +&ssusb {
>> + vusb33-supply = <®_3p3v>;
>> + vbus-supply = <®_5v>;
>> + status = "okay";
>> +};
>> +
>> +&u3phy1 {
>> + status = "okay";
>> +};
>> +
>> +&watchdog {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&watchdog_pins>;
>> + status = "okay";
>> +};
>> \ No newline at end of file
>> diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
>> new file mode 100644
>> index 0000000..0197660
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/mt7629.dtsi
>> @@ -0,0 +1,370 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2019 MediaTek Inc.
>> + *
>> + * Author: Ryder Lee <ryder....@mediatek.com>
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/mt7629-clk.h>
>> +#include <dt-bindings/power/mt7622-power.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/phy/phy.h>
>> +#include <dt-bindings/reset/mt7629-resets.h>
>> +
>> +/ {
>> + compatible = "mediatek,mt7629";
>> + interrupt-parent = <&sysirq>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + enable-method = "mediatek,mt6589-smp";
>> +
>> + cpu0: cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0x0>;
>> + clock-frequency = <1250000000>;
>> + cci-control-port = <&cci_control2>;
>> + };
>> +
>> + cpu1: cpu@1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0x1>;
>> + clock-frequency = <1250000000>;
>> + cci-control-port = <&cci_control2>;
>> + };
>> + };
>> +
>> + pmu {
>> + compatible = "arm,cortex-a7-pmu";
>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
>> + interrupt-affinity = <&cpu0>, <&cpu1>;
>> + };
>> +
>> + clk20m: oscillator-0 {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <20000000>;
>> + clock-output-names = "clk20m";
>> + };
>> +
>> + clk40m: oscillator-1 {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <40000000>;
>> + clock-output-names = "clkxtal";
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv7-timer";
>> + interrupt-parent = <&gic>;
>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
>> IRQ_TYPE_LEVEL_HIGH)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
>> IRQ_TYPE_LEVEL_HIGH)>,
>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
>> IRQ_TYPE_LEVEL_HIGH)>,
>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
>> IRQ_TYPE_LEVEL_HIGH)>;
>> + clock-frequency = <20000000>;
>> + arm,cpu-registers-not-fw-configured;
>> + };
>> +
>> + soc {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + compatible = "simple-bus";
>> + ranges;
>> +
>> + infracfg: syscon@10000000 {
>> + compatible = "mediatek,mt7629-infracfg", "syscon";
>> + reg = <0 0x10000000 0 0x1000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + pericfg: syscon@10002000 {
>> + compatible = "mediatek,mt7629-pericfg", "syscon";
>> + reg = <0 0x10002000 0 0x1000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + scpsys: scpsys@10006000 {
>> + compatible = "mediatek,mt7629-scpsys",
>> + "mediatek,mt7622-scpsys";
>
> Binding description is missing.
>
>> + #power-domain-cells = <1>;
>> + reg = <0 0x10006000 0 0x1000>;
>> + clocks = <&topckgen CLK_TOP_HIF_SEL>;
>> + clock-names = "hif_sel";
>> + assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
>> + assigned-clock-parents = <&topckgen
>> CLK_TOP_UNIVPLL1_D2>;
>> + infracfg = <&infracfg>;
>> + };
>> +
>> + timer: timer@10009000 {
>> + compatible = "mediatek,mt7629-timer",
>> + "mediatek,mt6765-timer";
>> + reg = <0 0x10009000 0 0x60>;
>> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&clk20m>;
>> + clock-names = "clk20m";
>> + };
>> +
>> + sysirq: interrupt-controller@10200a80 {
>> + compatible = "mediatek,mt7629-sysirq",
>> + "mediatek,mt6577-sysirq";
>
> Same here.
>
>> + reg = <0 0x10200a80 0 0x20>;
>> + interrupt-controller;
>> + #interrupt-cells = <3>;
>> + interrupt-parent = <&gic>;
>> + };
>> +
>> + apmixedsys: syscon@10209000 {
>> + compatible = "mediatek,mt7629-apmixedsys", "syscon";
>> + reg = <0 0x10209000 0 0x1000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + rng: rng@1020f000 {
>> + compatible = "mediatek,mt7629-rng",
>> + "mediatek,mt7623-rng";
>> + reg = <0 0x1020f000 0 0x100>;
>> + clocks = <&infracfg CLK_INFRA_TRNG_PD>;
>> + clock-names = "rng";
>> + };
>> +
>> + topckgen: syscon@10210000 {
>> + compatible = "mediatek,mt7629-topckgen", "syscon";
>> + reg = <0 0x10210000 0 0x1000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + watchdog: watchdog@10212000 {
>> + compatible = "mediatek,mt7629-wdt",
>> + "mediatek,mt6589-wdt";
>> + reg = <0 0x10212000 0 0x100>;
>> + };
>> +
>> + pio: pinctrl@10217000 {
>> + compatible = "mediatek,mt7629-pinctrl";
>> + reg = <0 0x10217000 0 0x8000>,
>> + <0 0x10005000 0 0x1000>;
>> + reg-names = "base", "eint";
>> + gpio-controller;
>> + gpio-ranges = <&pio 0 0 79>;
>> + #gpio-cells = <2>;
>> + #interrupt-cells = <2>;
>> + interrupt-controller;
>> + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-parent = <&gic>;
>> + };
>> +
>> + gic: interrupt-controller@10300000 {
>> + compatible = "arm,gic-400";
>> + interrupt-controller;
>> + #interrupt-cells = <3>;
>> + interrupt-parent = <&gic>;
>> + reg = <0 0x10310000 0 0x1000>,
>> + <0 0x10320000 0 0x1000>,
>> + <0 0x10340000 0 0x2000>,
>> + <0 0x10360000 0 0x2000>;
>> + };
>> +
>> + cci: cci@10390000 {
>> + compatible = "arm,cci-400";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + reg = <0 0x10390000 0 0x1000>;
>> + ranges = <0 0 0x10390000 0x10000>;
>> +
>> + cci_control0: slave-if@1000 {
>> + compatible = "arm,cci-400-ctrl-if";
>> + interface-type = "ace-lite";
>> + reg = <0x1000 0x1000>;
>> + };
>> +
>> + cci_control1: slave-if@4000 {
>> + compatible = "arm,cci-400-ctrl-if";
>> + interface-type = "ace";
>> + reg = <0x4000 0x1000>;
>> + };
>> +
>> + cci_control2: slave-if@5000 {
>> + compatible = "arm,cci-400-ctrl-if";
>> + interface-type = "ace";
>> + reg = <0x5000 0x1000>;
>> + };
>> +
>> + pmu@9000 {
>> + compatible = "arm,cci-400-pmu,r1";
>> + reg = <0x9000 0x5000>;
>> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> + };
>> +
>> + uart0: serial@11002000 {
>> + compatible = "mediatek,mt7629-uart",
>> + "mediatek,mt6577-uart";
>
> Same here.
>
> Please provide the corresponding patches (one for each component) in v2.
> Other then that, patch looks good to me.
>
submitted here:
https://patchwork.kernel.org/patch/10817049/
I'll take both of them. Sorry for the confusion.
Matthias
> Regards,
> Matthias
>
>> + reg = <0 0x11002000 0 0x400>;
>> + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
>> + clocks = <&topckgen CLK_TOP_UART_SEL>,
>> + <&pericfg CLK_PERI_UART0_PD>;
>> + clock-names = "baud", "bus";
>> + status = "disabled";
>> + };
>> +
>> + uart1: serial@11003000 {
>> + compatible = "mediatek,mt7629-uart",
>> + "mediatek,mt6577-uart";
>> + reg = <0 0x11003000 0 0x400>;
>> + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
>> + clocks = <&topckgen CLK_TOP_UART_SEL>,
>> + <&pericfg CLK_PERI_UART1_PD>;
>> + clock-names = "baud", "bus";
>> + status = "disabled";
>> + };
>> +
>> + uart2: serial@11004000 {
>> + compatible = "mediatek,mt7629-uart",
>> + "mediatek,mt6577-uart";
>> + reg = <0 0x11004000 0 0x400>;
>> + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
>> + clocks = <&topckgen CLK_TOP_UART_SEL>,
>> + <&pericfg CLK_PERI_UART2_PD>;
>> + clock-names = "baud", "bus";
>> + status = "disabled";
>> + };
>> +
>> + i2c: i2c@11007000 {
>> + compatible = "mediatek,mt7629-i2c",
>> + "mediatek,mt2712-i2c";
>> + reg = <0 0x11007000 0 0x90>,
>> + <0 0x11000100 0 0x80>;
>> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
>> + clock-div = <4>;
>> + clocks = <&pericfg CLK_PERI_I2C0_PD>,
>> + <&pericfg CLK_PERI_AP_DMA_PD>;
>> + clock-names = "main", "dma";
>> + assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
>> + assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi: spi@1100a000 {
>> + compatible = "mediatek,mt7629-spi",
>> + "mediatek,mt7622-spi";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0 0x1100a000 0 0x100>;
>> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
>> + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
>> + <&topckgen CLK_TOP_SPI0_SEL>,
>> + <&pericfg CLK_PERI_SPI0_PD>;
>> + clock-names = "parent-clk", "sel-clk", "spi-clk";
>> + status = "disabled";
>> + };
>> +
>> + qspi: spi@11014000 {
>> + compatible = "mediatek,mt7629-nor",
>> + "mediatek,mt8173-nor";
>> + reg = <0 0x11014000 0 0xe0>;
>> + clocks = <&pericfg CLK_PERI_FLASH_PD>,
>> + <&topckgen CLK_TOP_FLASH_SEL>;
>> + clock-names = "spi", "sf";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + ssusbsys: syscon@1a000000 {
>> + compatible = "mediatek,mt7629-ssusbsys", "syscon";
>> + reg = <0 0x1a000000 0 0x1000>;
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> + };
>> +
>> + ssusb: usb@1a0c0000 {
>> + compatible = "mediatek,mt7629-xhci",
>> + "mediatek,mtk-xhci";
>> + reg = <0 0x1a0c0000 0 0x01000>,
>> + <0 0x1a0c3e00 0 0x0100>;
>> + reg-names = "mac", "ippc";
>> + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
>> + clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
>> + <&ssusbsys CLK_SSUSB_REF_EN>,
>> + <&ssusbsys CLK_SSUSB_MCU_EN>,
>> + <&ssusbsys CLK_SSUSB_DMA_EN>;
>> + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
>> + assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
>> + <&topckgen CLK_TOP_SATA_SEL>,
>> + <&topckgen CLK_TOP_HIF_SEL>;
>> + assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
>> + <&topckgen
>> CLK_TOP_UNIVPLL2_D4>,
>> + <&topckgen
>> CLK_TOP_UNIVPLL1_D2>;
>> + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
>> + phys = <&u2port0 PHY_TYPE_USB2>,
>> + <&u3port0 PHY_TYPE_USB3>;
>> + status = "disabled";
>> + };
>> +
>> + u3phy1: usb-phy@1a0c4000 {
>> + compatible = "mediatek,generic-tphy-v1";
>> + reg = <0 0x1a0c4000 0 0x300>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> + status = "disabled";
>> +
>> + u2port0: usb-phy@1a0c4300 {
>> + reg = <0 0x1a0c4300 0 0x100>;
>> + clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
>> + clock-names = "ref";
>> + #phy-cells = <1>;
>> + status = "okay";
>> + };
>> +
>> + u3port0: usb-phy@1a1c4900 {
>> + reg = <0 0x1a1c4900 0 0x700>;
>> + clocks = <&clk20m>;
>> + clock-names = "ref";
>> + #phy-cells = <1>;
>> + status = "okay";
>> + };
>> + };
>> +
>> + pciesys: syscon@1a100800 {
>> + compatible = "mediatek,mt7629-pciesys", "syscon";
>> + reg = <0 0x1a100800 0 0x1000>;
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> + };
>> +
>> + ethsys: syscon@1b000000 {
>> + compatible = "mediatek,mt7629-ethsys", "syscon";
>> + reg = <0 0x1b000000 0 0x1000>;
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> + };
>> +
>> + sgmiisys0: syscon@1b128000 {
>> + compatible = "mediatek,mt7629-sgmiisys", "syscon";
>> + reg = <0 0x1b128000 0 0x1000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + sgmiisys1: syscon@1b130000 {
>> + compatible = "mediatek,mt7629-sgmiisys", "syscon";
>> + reg = <0 0x1b130000 0 0x1000>;
>> + #clock-cells = <1>;
>> + };
>> + };
>> +};
>> diff --git a/include/dt-bindings/reset/mt7629-resets.h
>> b/include/dt-bindings/reset/mt7629-resets.h
>> new file mode 100644
>> index 0000000..6bb8573
>> --- /dev/null
>> +++ b/include/dt-bindings/reset/mt7629-resets.h
>> @@ -0,0 +1,71 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (C) 2019 MediaTek Inc.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7629
>> +#define _DT_BINDINGS_RESET_CONTROLLER_MT7629
>> +
>> +/* INFRACFG resets */
>> +#define MT7629_INFRA_EMI_MPU_RST 0
>> +#define MT7629_INFRA_UART5_RST 2
>> +#define MT7629_INFRA_CIRQ_EINT_RST 3
>> +#define MT7629_INFRA_APXGPT_RST 4
>> +#define MT7629_INFRA_SCPSYS_RST 5
>> +#define MT7629_INFRA_KP_RST 6
>> +#define MT7629_INFRA_SPI1_RST 7
>> +#define MT7629_INFRA_SPI4_RST 8
>> +#define MT7629_INFRA_SYSTIMER_RST 9
>> +#define MT7629_INFRA_IRRX_RST 10
>> +#define MT7629_INFRA_AO_BUS_RST 16
>> +#define MT7629_INFRA_EMI_RST 32
>> +#define MT7629_INFRA_APMIXED_RST 35
>> +#define MT7629_INFRA_MIPI_RST 36
>> +#define MT7629_INFRA_TRNG_RST 37
>> +#define MT7629_INFRA_SYSCIRQ_RST 38
>> +#define MT7629_INFRA_MIPI_CSI_RST 39
>> +#define MT7629_INFRA_GCE_FAXI_RST 40
>> +#define MT7629_INFRA_I2C_SRAM_RST 41
>> +#define MT7629_INFRA_IOMMU_RST 47
>> +
>> +/* PERICFG resets */
>> +#define MT7629_PERI_UART0_SW_RST 0
>> +#define MT7629_PERI_UART1_SW_RST 1
>> +#define MT7629_PERI_UART2_SW_RST 2
>> +#define MT7629_PERI_BTIF_SW_RST 6
>> +#define MT7629_PERI_PWN_SW_RST 8
>> +#define MT7629_PERI_DMA_SW_RST 11
>> +#define MT7629_PERI_NFI_SW_RST 14
>> +#define MT7629_PERI_I2C0_SW_RST 22
>> +#define MT7629_PERI_SPI0_SW_RST 33
>> +#define MT7629_PERI_SPI1_SW_RST 34
>> +#define MT7629_PERI_FLASHIF_SW_RST 36
>> +
>> +/* PCIe Subsystem resets */
>> +#define MT7629_PCIE1_CORE_RST 19
>> +#define MT7629_PCIE1_MMIO_RST 20
>> +#define MT7629_PCIE1_HRST 21
>> +#define MT7629_PCIE1_USER_RST 22
>> +#define MT7629_PCIE1_PIPE_RST 23
>> +#define MT7629_PCIE0_CORE_RST 27
>> +#define MT7629_PCIE0_MMIO_RST 28
>> +#define MT7629_PCIE0_HRST 29
>> +#define MT7629_PCIE0_USER_RST 30
>> +#define MT7629_PCIE0_PIPE_RST 31
>> +
>> +/* SSUSB Subsystem resets */
>> +#define MT7629_SSUSB_PHY_PWR_RST 3
>> +#define MT7629_SSUSB_MAC_PWR_RST 4
>> +
>> +/* ETH Subsystem resets */
>> +#define MT7629_ETHSYS_SYS_RST 0
>> +#define MT7629_ETHSYS_MCM_RST 2
>> +#define MT7629_ETHSYS_HSDMA_RST 5
>> +#define MT7629_ETHSYS_FE_RST 6
>> +#define MT7629_ETHSYS_ESW_RST 16
>> +#define MT7629_ETHSYS_GMAC_RST 23
>> +#define MT7629_ETHSYS_EPHY_RST 24
>> +#define MT7629_ETHSYS_CRYPTO_RST 29
>> +#define MT7629_ETHSYS_PPE_RST 31
>> +
>> +#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT7629 */
>>
