On Fri, Mar 01, 2019 at 01:24:18AM +0000, Anson Huang wrote:
> Freescale MMDC (Multi Mode DDR Controller) driver is supported
> since i.MX6Q, but not yet documented, this patch adds binding
> doc for MMDC module driver.
>
> Signed-off-by: Anson Huang <anson.hu...@nxp.com>
> ---
> Changes since V3:
> - add i.MX6QP compatible name.
> ---
> .../bindings/memory-controllers/fsl/mmdc.txt | 33
> ++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt
>
> diff --git
> a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt
> b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt
> new file mode 100644
> index 0000000..e4e0b50
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt
> @@ -0,0 +1,33 @@
> +Freescale Multi Mode DDR controller (MMDC)
> +
> +Required properties :
> +- compatible : should be one of following:
> + for i.MX6Q/i.MX6DL:
> + - "fsl,imx6q-mmdc";
> + for i.MX6QP:
> + - "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
> + for i.MX6SL:
> + - "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
> + for i.MX6SLL:
> + - "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
> + for i.MX6SX:
> + - "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
> + for i.MX6UL/i.MX6ULL/i.MX6ULZ:
> + - "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
> + for i.MX7ULP:
> + - "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc";
> +- reg : address and size of MMDC DDR controller registers
> +
> +Optional properties :
> +- clocks : the clock provided by the SoC to access the MMDC registers
> +
> +Example :
> + mmdc0: memory-controller@21b0000 { /* MMDC0 */
> + compatible = "fsl,imx6q-mmdc";
> + reg = <0x021b0000 0x4000>;
> + clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
> + }
> +
> + mmdc1: memory-controller@21b4000 { /* MMDC1 */
> + reg = <0x021b4000 0x4000>;
What is this node? No compatible here should be considered invalid.
Seems like maybe the 1st node should have 2 register ranges if you want
a single device.
Rob
