> On 01.03.2019, at 19:17, Heiko Stuebner <he...@sntech.de> wrote:
> 
> Am Freitag, 1. März 2019, 17:43:45 CET schrieb Christoph Muellner:
>> Direct commands (DCMDs) are an optional feature of eMMC 5.1's command
>> queue engine (CQE). The Arasan eMMC 5.1 controller uses the CQHCI,
>> which exposes a control register bit to enable the feature.
>> The current implementation sets this bit unconditionally.
>> 
>> This patch allows to surpress the feature activation,
>> by specifying the property disable-cqe-dcmd.
>> 
>> Signed-off-by: Christoph Muellner <christoph.muell...@theobroma-systems.com>
>> Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
> 
> Patch subject is needs improvement :-) .
> I did scratch my head a lot regarding "where is the code change"
> until I actually looked into the patch itself, so you probably want
> 
>       mmc: sdhci-of-arasan: Add DTS property to disable DCMDs
> 
> or similar instead of "dt-bindings: ..." here to match the subsystem.

Yes, I've spotted this as well after sending it.
I've already renamed to "mmc: sdhci-of-arasan: Add DTS property to disable 
DCMDs." for v2.

Thanks,
Christoph

> 
> 
> Heiko
> 
>> ---
>> drivers/mmc/host/sdhci-of-arasan.c | 5 ++++-
>> 1 file changed, 4 insertions(+), 1 deletion(-)
>> 
>> diff --git a/drivers/mmc/host/sdhci-of-arasan.c 
>> b/drivers/mmc/host/sdhci-of-arasan.c
>> index c9e3e050ccc8..88dc3f00a5be 100644
>> --- a/drivers/mmc/host/sdhci-of-arasan.c
>> +++ b/drivers/mmc/host/sdhci-of-arasan.c
>> @@ -832,7 +832,10 @@ static int sdhci_arasan_probe(struct platform_device 
>> *pdev)
>>              host->mmc_host_ops.start_signal_voltage_switch =
>>                                      sdhci_arasan_voltage_switch;
>>              sdhci_arasan->has_cqe = true;
>> -            host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
>> +            host->mmc->caps2 |= MMC_CAP2_CQE;
>> +
>> +            if (!of_property_read_bool(np, "disable-cqe-dcmd"))
>> +                    host->mmc->caps2 |= MMC_CAP2_CQE_DCMD;
>>      }
>> 
>>      ret = sdhci_arasan_add_host(sdhci_arasan);
>> 
> 
> 
> 
> 

Reply via email to