This was pretty simple. Also did the SET_MODULE_OWNER thing.
It affects two files:
drivers/net/defxx.c
drivers/net/ptifddi.c
I'm not sure what the story is with ptifddi.c. It isn't
mentioned in any of the kernel Makefiles?
Now just 67 ethernet drivers to do :)
--- linux-2.4.0-test13pre4-ac2/drivers/net/defxx.c Sat Sep 9 16:19:26 2000
+++ linux-akpm/drivers/net/defxx.c Sat Dec 23 23:48:35 2000
@@ -423,15 +423,17 @@
}
/*
- * init_fddidev() allocates a device structure with private data, clears the
device structure and private data,
- * and calls fddi_setup() and register_netdev(). Not much left to do for us
here.
+ * prepare_fddidev() allocates a device structure with private data, clears
+the device
+ * structure and private data and then calls fddi_setup(). Once the device is
+ready
+ * to be opened we call publish_netdev() to advertise its availability.
*/
- dev = init_fddidev( NULL, sizeof(*bp));
+ dev = prepare_fddidev(NULL, sizeof(*bp));
if (!dev) {
printk (KERN_ERR "defxx: unable to allocate fddidev, aborting\n");
return -ENOMEM;
}
+ SET_MODULE_OWNER(dev);
bp = (DFX_board_t*)dev->priv;
@@ -470,12 +472,13 @@
if (dfx_driver_init(dev) != DFX_K_SUCCESS)
goto err_out_region;
+ publish_netdev(dev);
return 0;
err_out_region:
release_region(ioaddr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN);
err_out:
- unregister_netdev(dev);
+ withdraw_netdev(dev);
kfree(dev);
return -ENODEV;
}
@@ -1187,14 +1190,11 @@
DBG_printk("In dfx_open...\n");
- MOD_INC_USE_COUNT;
-
/* Register IRQ - support shared interrupts by passing device ptr */
if (request_irq(dev->irq, (void *)dfx_interrupt, SA_SHIRQ, dev->name, dev))
{
printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq);
- MOD_DEC_USE_COUNT;
return -EAGAIN;
}
@@ -1232,7 +1232,6 @@
{
printk(KERN_ERR "%s: Adapter open failed!\n", dev->name);
free_irq(dev->irq, dev);
- MOD_DEC_USE_COUNT;
return -EAGAIN;
}
@@ -1326,7 +1325,6 @@
free_irq(dev->irq, dev);
- MOD_DEC_USE_COUNT;
return(0);
}
--- linux-2.4.0-test13pre4-ac2/drivers/net/ptifddi.c Sat Jul 15 19:36:08 2000
+++ linux-akpm/drivers/net/ptifddi.c Sat Dec 23 23:49:09 2000
@@ -154,18 +154,23 @@
static unsigned version_printed = 0;
struct ptifddi *pp;
int i;
-
- dev = init_fddidev(0, sizeof(struct ptifddi));
+ int retval;
if(version_printed++ == 0)
printk(version);
+ dev = prepare_fddidev(0, sizeof(struct ptifddi));
+ if (dev == NULL)
+ return -ENOMEM;
+ SET_MODULE_OWNER(dev);
+
/* Register 0 mapping contains DPRAM. */
pp->dpram = (struct dfddi_ram *) sbus_ioremap(
&sdep->resource[0], 0, sizeof(sturct dfddi_ram), "PTI FDDI DPRAM");
if(!pp->dpram) {
printk("ptiFDDI: Cannot map DPRAM I/O area.\n");
- return -ENODEV;
+ retval = -ENODEV;
+ goto err_out;
}
/* Next, register 1 contains reset byte. */
@@ -173,7 +178,8 @@
&sdep->resource[1], 0, 1, "PTI FDDI RESET Byte");
if(!pp->reset) {
printk("ptiFDDI: Cannot map RESET byte.\n");
- return -ENODEV;
+ retval = -ENODEV;
+ goto err_out;
}
/* Register 2 contains unreset byte. */
@@ -181,7 +187,8 @@
&sdep->resource[2], 0, 1, "PTI FDDI UNRESET Byte");
if(!pp->unreset) {
printk("ptiFDDI: Cannot map UNRESET byte.\n");
- return -ENODEV;
+ retval = -ENODEV;
+ goto err_out;
}
/* Reset the card. */
@@ -191,7 +198,8 @@
i = pti_card_test(pp);
if(i) {
printk("ptiFDDI: Bootup card test fails.\n");
- return -ENODEV;
+ retval = -ENODEV;
+ goto err_out;
}
/* Clear DPRAM, start afresh. */
@@ -202,6 +210,12 @@
/* Now load main card FDDI firmware, using the loader. */
pti_load_main_firmware(pp);
+ publish_netdev(dev);
+ return 0;
+err_out:
+ withdraw_netdev(dev);
+ kfree(dev);
+ return retval;
}
int __init ptifddi_sbus_probe(struct net_device *dev)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
