> From: Anson Huang
> Sent: Thursday, February 7, 2019 5:53 PM
[...]
> 
> NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system
> controller, the system controller is in charge of system power, clock and
> thermal sensors etc. management, Linux kernel has to communicate with
> system controller via MU (message unit) IPC to get temperature from thermal
> sensors, this patch adds binding doc for i.MX system controller thermal 
> driver.
> 
> Signed-off-by: Anson Huang <anson.hu...@nxp.com>
> Reviewed-by: Rob Herring <r...@kernel.org>
> ---
> ChangeLog since V5:
>       - add "imx,sensor-resource-id" in each thermal zone to pass resource ID
> for thermal driver.
> ---
>  .../devicetree/bindings/arm/freescale/fsl,scu.txt    | 20
> ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> index 72d481c..4b79751 100644
> --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> @@ -122,6 +122,20 @@ RTC bindings based on SCU Message Protocol
> Required properties:
>  - compatible: should be "fsl,imx8qxp-sc-rtc";
> 
> +Thermal bindings based on SCU Message Protocol
> +------------------------------------------------------------
> +
> +Required properties:
> +- compatible : Must be "fsl,imx8qxp-sc-thermal";
> +- tsens-num : Total number of thermal sensors supported;
> +- #thermal-sensor-cells : Should be 1. See
> +                       Documentation/devicetree/bindings/thermal/thermal.txt
> +                       for a description.
> +- imx,sensor-resource-id : This property should be defined in each thermal
> zone
> +                        of thermal-zones node, it passes each thermal zone's
> +                        resource id for thermal driver to get temperature via
> +                        SCU IPC.

This is missing in the example?

BTW, is this SCU function likely platform dependent?
If not, you probably could add a fallback compatible such as "fsl,scu-rtc"

Regards
Dong Aisheng

> +
>  Example (imx8qxp):
>  -------------
>  lsio_mu1: mailbox@5d1c0000 {
> @@ -168,6 +182,12 @@ firmware {
>               rtc: rtc {
>                       compatible = "fsl,imx8qxp-sc-rtc";
>               };
> +
> +             tsens: thermal-sensor {
> +                     compatible = "fsl,imx8qxp-sc-thermal";
> +                     tsens-num = <1>;
> +                     #thermal-sensor-cells = <1>;
> +             };
>       };
>  };
> 
> --
> 2.7.4

Reply via email to