On 14/02/2019 12:14:32+0000, claudiu.bez...@microchip.com wrote:
> From: Claudiu Beznea <claudiu.bez...@microchip.com>
> 
> Add support for SAM9X60.
> 
> Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com>
> ---
>  drivers/clk/at91/sckc.c | 30 ++++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/drivers/clk/at91/sckc.c b/drivers/clk/at91/sckc.c
> index b7163d3a2269..b3075c51d260 100644
> --- a/drivers/clk/at91/sckc.c
> +++ b/drivers/clk/at91/sckc.c
> @@ -459,6 +459,36 @@ static void __init of_at91sam9x5_sckc_setup(struct 
> device_node *np)
>  CLK_OF_DECLARE(at91sam9x5_clk_sckc, "atmel,at91sam9x5-sckc",
>              of_at91sam9x5_sckc_setup);
>  
> +static const struct clk_slow_offsets at91sam9x60_offsets = {
> +     .cr_rcen = AT91_SCKC_OFFSET_INVALID,
> +     .cr_osc32en = 1,
> +     .cr_osc32byp = 2,
> +     .cr_oscsel = 24,
> +};
> +
> +static void __init of_at91sam9x60_sckc_setup(struct device_node *np)
> +{
> +     struct device_node *childnp;
> +     void (*clk_setup)(struct device_node *np, void __iomem *io,
> +                       const struct clk_slow_offsets *offsets);
> +     const struct of_device_id *clk_id;
> +     void __iomem *regbase = of_iomap(np, 0);
> +
> +     if (!regbase)
> +             return;
> +
> +     for_each_child_of_node(np, childnp) {
> +             clk_id = of_match_node(sckc_clk_ids, childnp);
> +             if (!clk_id)
> +                     continue;
> +             clk_setup = clk_id->data;
> +             clk_setup(childnp, regbase, &at91sam9x60_offsets);
> +     }

You actually need to have new bindings. The sam9x60 registration should
look more like the sama5d4 registration. I have a rework for the sam9x5
sckc that I will send this week to have a proper binding (i.e: no
children).

However, there is a fundamental change in the sam9x60, previously, the
sckc had only one output clock. the sam9x60 has both td_slck and
md_slck. Both need to be accessible because they are input to the PMC.

This means you will have to register the sckc with of_clk_hw_onecell_get
as the get callback.

We could still decide to do the same with sam9x5 even if it has only one
output clock.

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Reply via email to