On 2019-02-14 17:58, Russell King - ARM Linux admin wrote:
> On Thu, Feb 14, 2019 at 03:31:14PM +0100, Marek Szyprowski wrote:
>> MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to
>> perform low-level platform initialization. This results in a try to install
>> HYP stubs for the second time for each CPU and results in false HYP/SVC
>> mode mismatch detection. The HYP stubs are already installed at the
>> beginning of the kernel initialization on the boot CPU (head.S) or in the
>> secondary_startup() for other CPUs. To fix this issue MCPM code should use
>> a cpu_resume() routine without HYP stubs installation.
>>
>> This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid
>> XU3/XU4/HC1 boards.
>>
>> Fixes: 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for
>> MCPM loopback")
>> Signed-off-by: Marek Szyprowski <m.szyprow...@samsung.com>
>> ---
>> arch/arm/common/mcpm_entry.c | 2 +-
>> arch/arm/include/asm/suspend.h | 1 +
>> arch/arm/kernel/sleep.S | 11 +++++++++++
>> 3 files changed, 13 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
>> index ad574d20415c..1b1b82b37ce0 100644
>> --- a/arch/arm/common/mcpm_entry.c
>> +++ b/arch/arm/common/mcpm_entry.c
>> @@ -381,7 +381,7 @@ static int __init nocache_trampoline(unsigned long _arg)
>> unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
>> phys_reset_t phys_reset;
>>
>> - mcpm_set_entry_vector(cpu, cluster, cpu_resume);
>> + mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
>> setup_mm_for_reboot();
>>
>> __mcpm_cpu_going_down(cpu, cluster);
>> diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
>> index 452bbdcbcc83..506314265c6f 100644
>> --- a/arch/arm/include/asm/suspend.h
>> +++ b/arch/arm/include/asm/suspend.h
>> @@ -10,6 +10,7 @@ struct sleep_save_sp {
>> };
>>
>> extern void cpu_resume(void);
>> +extern void cpu_resume_no_hyp(void);
>> extern void cpu_resume_arm(void);
>> extern int cpu_suspend(unsigned long, int (*)(unsigned long));
>>
>> diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
>> index a8257fc9cf2a..b856d183691e 100644
>> --- a/arch/arm/kernel/sleep.S
>> +++ b/arch/arm/kernel/sleep.S
>> @@ -122,6 +122,11 @@ ENDPROC(cpu_resume_after_mmu)
>>
>> #ifdef CONFIG_MMU
>> .arm
>> +#ifdef CONFIG_MCPM
>> +ENTRY(cpu_resume_no_hyp)
>> +ARM_BE8(setend be) @ ensure we are in BE mode
>> + b 0f
> What if the kernel is built for Thumb? You'll be branching to thumb
> code at the '0' label - don't you need to do the same that
> cpu_resume_arm does below?
Maybe yes, but I don't get how did it work so far. Current version of
the cpu_resume() doesn't check the CPU ARM/Thumb mode. Such version is
used by MCPM, blSwitcher and various suspend/resume code from
arch/arm/mach-*. The mode check is in the cpu_resume_arm(), which is
used only by two SoC drivers in drivers/soc). Does it mean that most of
the current cpu_resume() users are wrong?
I've didn't try building Thumb kernel so far to check that.
>> +#endif
>> ENTRY(cpu_resume_arm)
>> THUMB( badr r9, 1f ) @ Kernel is entered in ARM.
>> THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
>> @@ -135,6 +140,9 @@ ARM_BE8(setend be) @ ensure we are
>> in BE mode
>> bl __hyp_stub_install_secondary
>> #endif
>> safe_svcmode_maskall r1
>> +#ifdef CONFIG_MCPM
>> +0:
>> +#endif
> You don't need to conditionalise this. I'd also use a symbol rather
> than a numeric label given that safe_svcmode_maskall is a macro that
> also uses numeric labels.
Okay.
>> mov r1, #0
>> ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
>> ALT_UP_B(1f)
>> @@ -163,6 +171,9 @@ ENDPROC(cpu_resume)
>>
>> #ifdef CONFIG_MMU
>> ENDPROC(cpu_resume_arm)
>> +#endif
>> +#ifdef CONFIG_MCPM
>> +ENDPROC(cpu_resume_no_hyp)
>> #endif
>>
>> .align 2
>> --
>> 2.17.1
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
